Why is my computer out of battery when I wake it from hibernation?
up vote
1
down vote
favorite
I use hibernate, I don't know what happens, with other modes. Sometimes (not always) when I turn the computer on, it says, that battery is too low (like 4% or something). I use the computer mostly with the charger, it should be fully charged, when I turn it off.
The computer somehow turns itself on. I don't know why or how, but several times I have heard the "error noise", and it's warm in the morning.
I checked, taht the maintenance time is not set to night and not allowed to wake the computer, I checked, that the computer is not allowed to restart, when some error happens.
I am using windows 10
laptop battery hibernate
add a comment |
up vote
1
down vote
favorite
I use hibernate, I don't know what happens, with other modes. Sometimes (not always) when I turn the computer on, it says, that battery is too low (like 4% or something). I use the computer mostly with the charger, it should be fully charged, when I turn it off.
The computer somehow turns itself on. I don't know why or how, but several times I have heard the "error noise", and it's warm in the morning.
I checked, taht the maintenance time is not set to night and not allowed to wake the computer, I checked, that the computer is not allowed to restart, when some error happens.
I am using windows 10
laptop battery hibernate
After asking the machine to hibernate, do you unplug it from the power?
– Stese
Dec 3 at 7:33
yes, I do. I had hibernation issues in the past in that it wouldn't hibernate, but it does now
– aky-her
Dec 3 at 8:17
And you shut the lid before it finishes hibernating?
– Stese
Dec 3 at 8:29
I hibernate by shutting the lid (it's set to hibernate when the lid closes)
– aky-her
Dec 4 at 20:23
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I use hibernate, I don't know what happens, with other modes. Sometimes (not always) when I turn the computer on, it says, that battery is too low (like 4% or something). I use the computer mostly with the charger, it should be fully charged, when I turn it off.
The computer somehow turns itself on. I don't know why or how, but several times I have heard the "error noise", and it's warm in the morning.
I checked, taht the maintenance time is not set to night and not allowed to wake the computer, I checked, that the computer is not allowed to restart, when some error happens.
I am using windows 10
laptop battery hibernate
I use hibernate, I don't know what happens, with other modes. Sometimes (not always) when I turn the computer on, it says, that battery is too low (like 4% or something). I use the computer mostly with the charger, it should be fully charged, when I turn it off.
The computer somehow turns itself on. I don't know why or how, but several times I have heard the "error noise", and it's warm in the morning.
I checked, taht the maintenance time is not set to night and not allowed to wake the computer, I checked, that the computer is not allowed to restart, when some error happens.
I am using windows 10
laptop battery hibernate
laptop battery hibernate
asked Dec 3 at 7:28
aky-her
1134
1134
After asking the machine to hibernate, do you unplug it from the power?
– Stese
Dec 3 at 7:33
yes, I do. I had hibernation issues in the past in that it wouldn't hibernate, but it does now
– aky-her
Dec 3 at 8:17
And you shut the lid before it finishes hibernating?
– Stese
Dec 3 at 8:29
I hibernate by shutting the lid (it's set to hibernate when the lid closes)
– aky-her
Dec 4 at 20:23
add a comment |
After asking the machine to hibernate, do you unplug it from the power?
– Stese
Dec 3 at 7:33
yes, I do. I had hibernation issues in the past in that it wouldn't hibernate, but it does now
– aky-her
Dec 3 at 8:17
And you shut the lid before it finishes hibernating?
– Stese
Dec 3 at 8:29
I hibernate by shutting the lid (it's set to hibernate when the lid closes)
– aky-her
Dec 4 at 20:23
After asking the machine to hibernate, do you unplug it from the power?
– Stese
Dec 3 at 7:33
After asking the machine to hibernate, do you unplug it from the power?
– Stese
Dec 3 at 7:33
yes, I do. I had hibernation issues in the past in that it wouldn't hibernate, but it does now
– aky-her
Dec 3 at 8:17
yes, I do. I had hibernation issues in the past in that it wouldn't hibernate, but it does now
– aky-her
Dec 3 at 8:17
And you shut the lid before it finishes hibernating?
– Stese
Dec 3 at 8:29
And you shut the lid before it finishes hibernating?
– Stese
Dec 3 at 8:29
I hibernate by shutting the lid (it's set to hibernate when the lid closes)
– aky-her
Dec 4 at 20:23
I hibernate by shutting the lid (it's set to hibernate when the lid closes)
– aky-her
Dec 4 at 20:23
add a comment |
2 Answers
2
active
oldest
votes
up vote
0
down vote
From the comments, it would seem that the machine isn't fully entering hibernation, thus leaving the power active to the machine. Since you unplug the machine, the battery drains as it's still in use.
The causes for this could be :-
- A Windows Error popping up, preventing completion of the process
- An in the hiberfil.sys file (where windows stores all the memory information)
- Another timer or setting which sends the machine to sleep or standby (two states which are low power, but still require power)
To diagnose or resolve this, set the power options to do nothing with the lid closes, and then ensure there is a good timer on other power options such as sleep and standby. Set the machine to hibernate only from your action (start menu). Observe the hibernating process until the power switches off, then remove the power from the screen. If it hibernates properly, you know that it's the other timers causing the issue. If it doesn't you'll get an error message which you can act on, and further diagnose the issue.
One other cause of hibernation problems is available disk space on the root drive (usually C:). You need at LEAST the total amount of RAM, as available disk space. If you are close to the limit, then that may account for the unpredictability of hibernation.
add a comment |
up vote
0
down vote
Could be some BIOS option, normally called something like Charge USB devices even when laptop is powered off.
I’ve seen it waste 10% overnight on a ThinkPad just trying to detect if something was plugged in USB. Could be that if you are leaving something plugged to the laptop.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1380334%2fwhy-is-my-computer-out-of-battery-when-i-wake-it-from-hibernation%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
From the comments, it would seem that the machine isn't fully entering hibernation, thus leaving the power active to the machine. Since you unplug the machine, the battery drains as it's still in use.
The causes for this could be :-
- A Windows Error popping up, preventing completion of the process
- An in the hiberfil.sys file (where windows stores all the memory information)
- Another timer or setting which sends the machine to sleep or standby (two states which are low power, but still require power)
To diagnose or resolve this, set the power options to do nothing with the lid closes, and then ensure there is a good timer on other power options such as sleep and standby. Set the machine to hibernate only from your action (start menu). Observe the hibernating process until the power switches off, then remove the power from the screen. If it hibernates properly, you know that it's the other timers causing the issue. If it doesn't you'll get an error message which you can act on, and further diagnose the issue.
One other cause of hibernation problems is available disk space on the root drive (usually C:). You need at LEAST the total amount of RAM, as available disk space. If you are close to the limit, then that may account for the unpredictability of hibernation.
add a comment |
up vote
0
down vote
From the comments, it would seem that the machine isn't fully entering hibernation, thus leaving the power active to the machine. Since you unplug the machine, the battery drains as it's still in use.
The causes for this could be :-
- A Windows Error popping up, preventing completion of the process
- An in the hiberfil.sys file (where windows stores all the memory information)
- Another timer or setting which sends the machine to sleep or standby (two states which are low power, but still require power)
To diagnose or resolve this, set the power options to do nothing with the lid closes, and then ensure there is a good timer on other power options such as sleep and standby. Set the machine to hibernate only from your action (start menu). Observe the hibernating process until the power switches off, then remove the power from the screen. If it hibernates properly, you know that it's the other timers causing the issue. If it doesn't you'll get an error message which you can act on, and further diagnose the issue.
One other cause of hibernation problems is available disk space on the root drive (usually C:). You need at LEAST the total amount of RAM, as available disk space. If you are close to the limit, then that may account for the unpredictability of hibernation.
add a comment |
up vote
0
down vote
up vote
0
down vote
From the comments, it would seem that the machine isn't fully entering hibernation, thus leaving the power active to the machine. Since you unplug the machine, the battery drains as it's still in use.
The causes for this could be :-
- A Windows Error popping up, preventing completion of the process
- An in the hiberfil.sys file (where windows stores all the memory information)
- Another timer or setting which sends the machine to sleep or standby (two states which are low power, but still require power)
To diagnose or resolve this, set the power options to do nothing with the lid closes, and then ensure there is a good timer on other power options such as sleep and standby. Set the machine to hibernate only from your action (start menu). Observe the hibernating process until the power switches off, then remove the power from the screen. If it hibernates properly, you know that it's the other timers causing the issue. If it doesn't you'll get an error message which you can act on, and further diagnose the issue.
One other cause of hibernation problems is available disk space on the root drive (usually C:). You need at LEAST the total amount of RAM, as available disk space. If you are close to the limit, then that may account for the unpredictability of hibernation.
From the comments, it would seem that the machine isn't fully entering hibernation, thus leaving the power active to the machine. Since you unplug the machine, the battery drains as it's still in use.
The causes for this could be :-
- A Windows Error popping up, preventing completion of the process
- An in the hiberfil.sys file (where windows stores all the memory information)
- Another timer or setting which sends the machine to sleep or standby (two states which are low power, but still require power)
To diagnose or resolve this, set the power options to do nothing with the lid closes, and then ensure there is a good timer on other power options such as sleep and standby. Set the machine to hibernate only from your action (start menu). Observe the hibernating process until the power switches off, then remove the power from the screen. If it hibernates properly, you know that it's the other timers causing the issue. If it doesn't you'll get an error message which you can act on, and further diagnose the issue.
One other cause of hibernation problems is available disk space on the root drive (usually C:). You need at LEAST the total amount of RAM, as available disk space. If you are close to the limit, then that may account for the unpredictability of hibernation.
answered Dec 5 at 7:25
Stese
801414
801414
add a comment |
add a comment |
up vote
0
down vote
Could be some BIOS option, normally called something like Charge USB devices even when laptop is powered off.
I’ve seen it waste 10% overnight on a ThinkPad just trying to detect if something was plugged in USB. Could be that if you are leaving something plugged to the laptop.
add a comment |
up vote
0
down vote
Could be some BIOS option, normally called something like Charge USB devices even when laptop is powered off.
I’ve seen it waste 10% overnight on a ThinkPad just trying to detect if something was plugged in USB. Could be that if you are leaving something plugged to the laptop.
add a comment |
up vote
0
down vote
up vote
0
down vote
Could be some BIOS option, normally called something like Charge USB devices even when laptop is powered off.
I’ve seen it waste 10% overnight on a ThinkPad just trying to detect if something was plugged in USB. Could be that if you are leaving something plugged to the laptop.
Could be some BIOS option, normally called something like Charge USB devices even when laptop is powered off.
I’ve seen it waste 10% overnight on a ThinkPad just trying to detect if something was plugged in USB. Could be that if you are leaving something plugged to the laptop.
edited Dec 5 at 9:45
answered Dec 5 at 7:38
Sacha K
8122918
8122918
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1380334%2fwhy-is-my-computer-out-of-battery-when-i-wake-it-from-hibernation%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
After asking the machine to hibernate, do you unplug it from the power?
– Stese
Dec 3 at 7:33
yes, I do. I had hibernation issues in the past in that it wouldn't hibernate, but it does now
– aky-her
Dec 3 at 8:17
And you shut the lid before it finishes hibernating?
– Stese
Dec 3 at 8:29
I hibernate by shutting the lid (it's set to hibernate when the lid closes)
– aky-her
Dec 4 at 20:23