tracert shows different responses from different laptops. Is it normal?
up vote
0
down vote
favorite
I recently noticed the following. Is this normal?
Running two laptops side by side, one tracert command shows responses along the routers from modem all the way to 8.8.8.8
At the same time, the other laptop keeps getting "Request timed out", except the initial response from my modem and the final destination 8.8.8.8
Is this normal?
networking router traceroute
add a comment |
up vote
0
down vote
favorite
I recently noticed the following. Is this normal?
Running two laptops side by side, one tracert command shows responses along the routers from modem all the way to 8.8.8.8
At the same time, the other laptop keeps getting "Request timed out", except the initial response from my modem and the final destination 8.8.8.8
Is this normal?
networking router traceroute
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I recently noticed the following. Is this normal?
Running two laptops side by side, one tracert command shows responses along the routers from modem all the way to 8.8.8.8
At the same time, the other laptop keeps getting "Request timed out", except the initial response from my modem and the final destination 8.8.8.8
Is this normal?
networking router traceroute
I recently noticed the following. Is this normal?
Running two laptops side by side, one tracert command shows responses along the routers from modem all the way to 8.8.8.8
At the same time, the other laptop keeps getting "Request timed out", except the initial response from my modem and the final destination 8.8.8.8
Is this normal?
networking router traceroute
networking router traceroute
asked 9 hours ago
B Chen
1659
1659
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
up vote
1
down vote
This is not normal, but has a number of possible explanations including
- Double NAT/bad carrier grade NAT.
- Different types of ping, with some types being blocked at the router (there are actually multiple different ways to ping/traceroute which are handled differently through firewalls)
- Bad router firmware which can't track multiple connections when using NAT.
add a comment |
up vote
0
down vote
A timeout occurred in the tracert, indicating that the network node device passing the laptop to the 8.8.8.8 server is prohibited from returning the tracert package.
This is normal if two laptops are connected to different networks.
If the two laptops are connected to the same network, this is not normal.
This is not the only possible option. Pong is one of the least priority processes. If the load on the router is large, it may just have no resources for the response.
– Akina
6 hours ago
@Daisy, The two laptops are connected to the same network. So what would be the cause(s) and how to fix them.
– B Chen
4 hours ago
@Akina, if I understand your response correctly, are you suggesting that if the router (which one? home modem/router?) is overwhelmed, it may not have the bandwidth to show/allow for a back response from the outside router(s) to the other laptop. Is this correct?
– B Chen
4 hours ago
Yes. But in most cases the thin place is inner processor resources, not bandwidth.
– Akina
4 hours ago
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
This is not normal, but has a number of possible explanations including
- Double NAT/bad carrier grade NAT.
- Different types of ping, with some types being blocked at the router (there are actually multiple different ways to ping/traceroute which are handled differently through firewalls)
- Bad router firmware which can't track multiple connections when using NAT.
add a comment |
up vote
1
down vote
This is not normal, but has a number of possible explanations including
- Double NAT/bad carrier grade NAT.
- Different types of ping, with some types being blocked at the router (there are actually multiple different ways to ping/traceroute which are handled differently through firewalls)
- Bad router firmware which can't track multiple connections when using NAT.
add a comment |
up vote
1
down vote
up vote
1
down vote
This is not normal, but has a number of possible explanations including
- Double NAT/bad carrier grade NAT.
- Different types of ping, with some types being blocked at the router (there are actually multiple different ways to ping/traceroute which are handled differently through firewalls)
- Bad router firmware which can't track multiple connections when using NAT.
This is not normal, but has a number of possible explanations including
- Double NAT/bad carrier grade NAT.
- Different types of ping, with some types being blocked at the router (there are actually multiple different ways to ping/traceroute which are handled differently through firewalls)
- Bad router firmware which can't track multiple connections when using NAT.
answered 3 hours ago
davidgo
41k74684
41k74684
add a comment |
add a comment |
up vote
0
down vote
A timeout occurred in the tracert, indicating that the network node device passing the laptop to the 8.8.8.8 server is prohibited from returning the tracert package.
This is normal if two laptops are connected to different networks.
If the two laptops are connected to the same network, this is not normal.
This is not the only possible option. Pong is one of the least priority processes. If the load on the router is large, it may just have no resources for the response.
– Akina
6 hours ago
@Daisy, The two laptops are connected to the same network. So what would be the cause(s) and how to fix them.
– B Chen
4 hours ago
@Akina, if I understand your response correctly, are you suggesting that if the router (which one? home modem/router?) is overwhelmed, it may not have the bandwidth to show/allow for a back response from the outside router(s) to the other laptop. Is this correct?
– B Chen
4 hours ago
Yes. But in most cases the thin place is inner processor resources, not bandwidth.
– Akina
4 hours ago
add a comment |
up vote
0
down vote
A timeout occurred in the tracert, indicating that the network node device passing the laptop to the 8.8.8.8 server is prohibited from returning the tracert package.
This is normal if two laptops are connected to different networks.
If the two laptops are connected to the same network, this is not normal.
This is not the only possible option. Pong is one of the least priority processes. If the load on the router is large, it may just have no resources for the response.
– Akina
6 hours ago
@Daisy, The two laptops are connected to the same network. So what would be the cause(s) and how to fix them.
– B Chen
4 hours ago
@Akina, if I understand your response correctly, are you suggesting that if the router (which one? home modem/router?) is overwhelmed, it may not have the bandwidth to show/allow for a back response from the outside router(s) to the other laptop. Is this correct?
– B Chen
4 hours ago
Yes. But in most cases the thin place is inner processor resources, not bandwidth.
– Akina
4 hours ago
add a comment |
up vote
0
down vote
up vote
0
down vote
A timeout occurred in the tracert, indicating that the network node device passing the laptop to the 8.8.8.8 server is prohibited from returning the tracert package.
This is normal if two laptops are connected to different networks.
If the two laptops are connected to the same network, this is not normal.
A timeout occurred in the tracert, indicating that the network node device passing the laptop to the 8.8.8.8 server is prohibited from returning the tracert package.
This is normal if two laptops are connected to different networks.
If the two laptops are connected to the same network, this is not normal.
answered 7 hours ago
Daisy Zhou
564114
564114
This is not the only possible option. Pong is one of the least priority processes. If the load on the router is large, it may just have no resources for the response.
– Akina
6 hours ago
@Daisy, The two laptops are connected to the same network. So what would be the cause(s) and how to fix them.
– B Chen
4 hours ago
@Akina, if I understand your response correctly, are you suggesting that if the router (which one? home modem/router?) is overwhelmed, it may not have the bandwidth to show/allow for a back response from the outside router(s) to the other laptop. Is this correct?
– B Chen
4 hours ago
Yes. But in most cases the thin place is inner processor resources, not bandwidth.
– Akina
4 hours ago
add a comment |
This is not the only possible option. Pong is one of the least priority processes. If the load on the router is large, it may just have no resources for the response.
– Akina
6 hours ago
@Daisy, The two laptops are connected to the same network. So what would be the cause(s) and how to fix them.
– B Chen
4 hours ago
@Akina, if I understand your response correctly, are you suggesting that if the router (which one? home modem/router?) is overwhelmed, it may not have the bandwidth to show/allow for a back response from the outside router(s) to the other laptop. Is this correct?
– B Chen
4 hours ago
Yes. But in most cases the thin place is inner processor resources, not bandwidth.
– Akina
4 hours ago
This is not the only possible option. Pong is one of the least priority processes. If the load on the router is large, it may just have no resources for the response.
– Akina
6 hours ago
This is not the only possible option. Pong is one of the least priority processes. If the load on the router is large, it may just have no resources for the response.
– Akina
6 hours ago
@Daisy, The two laptops are connected to the same network. So what would be the cause(s) and how to fix them.
– B Chen
4 hours ago
@Daisy, The two laptops are connected to the same network. So what would be the cause(s) and how to fix them.
– B Chen
4 hours ago
@Akina, if I understand your response correctly, are you suggesting that if the router (which one? home modem/router?) is overwhelmed, it may not have the bandwidth to show/allow for a back response from the outside router(s) to the other laptop. Is this correct?
– B Chen
4 hours ago
@Akina, if I understand your response correctly, are you suggesting that if the router (which one? home modem/router?) is overwhelmed, it may not have the bandwidth to show/allow for a back response from the outside router(s) to the other laptop. Is this correct?
– B Chen
4 hours ago
Yes. But in most cases the thin place is inner processor resources, not bandwidth.
– Akina
4 hours ago
Yes. But in most cases the thin place is inner processor resources, not bandwidth.
– Akina
4 hours ago
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1375981%2ftracert-shows-different-responses-from-different-laptops-is-it-normal%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown