Selecting USB boot option simply boots Windows
I have flashed an ISO to a USB, restarted my computer and selected the USB as the boot option. The screen flashed to black and then the boot option menu came up again. After selecting the USB option for the second time and computer boots directly to windows as if that was the option I chose.
I used Rufus to flash the ISO. My computer can boot from a USB with a Linux ISO but this particular ISO is for DBAN.
windows-10 boot usb
asked Jan 25 at 22:04
DavidDavid
129112
|
show 1 more comment
I have flashed an ISO to a USB, restarted my computer and selected the USB as the boot option. The screen flashed to black and then the boot option menu came up again. After selecting the USB option for the second time and computer boots directly to windows as if that was the option I chose.
I used Rufus to flash the ISO. My computer can boot from a USB with a Linux ISO but this particular ISO is for DBAN.
windows-10 boot usb
asked Jan 25 at 22:04
DavidDavid
129112
1
Is your USB drive UEFI-bootable? Do you have Secure Boot enabled? Do you have legacy boot enabled?
– Daniel B
Jan 25 at 22:17
1) Yes. 2) It was enabled but then I disabled it (still didn't work). 3) I looked for that option but couldn't find it.
– David
Jan 25 at 22:39
@DanielB Actually, I'm not sure if it is UEFI-bootable. When the boot options came up the name for my USB had "UEFI" in it. Does that mean that it is? This is a pretty old USB.
– David
Jan 25 at 22:47
It’s not about the USB drive itself, it’s about the data. Is there a fileEFI/boot/bootx64.efion the drive? Is the drive formatted with FAT32?
– Daniel B
Jan 25 at 22:53
@DanielB It does not have that file but it is formatted to FAT32.
– David
Jan 26 at 1:24
|
show 1 more comment
I have flashed an ISO to a USB, restarted my computer and selected the USB as the boot option. The screen flashed to black and then the boot option menu came up again. After selecting the USB option for the second time and computer boots directly to windows as if that was the option I chose.
I used Rufus to flash the ISO. My computer can boot from a USB with a Linux ISO but this particular ISO is for DBAN.
windows-10 boot usb
asked Jan 25 at 22:04
DavidDavid
129112
I have flashed an ISO to a USB, restarted my computer and selected the USB as the boot option. The screen flashed to black and then the boot option menu came up again. After selecting the USB option for the second time and computer boots directly to windows as if that was the option I chose.
I used Rufus to flash the ISO. My computer can boot from a USB with a Linux ISO but this particular ISO is for DBAN.
windows-10 boot usb
windows-10 boot usb
asked Jan 25 at 22:04
DavidDavid
129112
asked Jan 25 at 22:04
DavidDavid
129112
edited Jan 25 at 22:13
David
asked Jan 25 at 22:04
DavidDavid
129112
asked Jan 25 at 22:04
DavidDavid
129112
asked Jan 25 at 22:04
DavidDavid
129112
129112
1
Is your USB drive UEFI-bootable? Do you have Secure Boot enabled? Do you have legacy boot enabled?
– Daniel B
Jan 25 at 22:17
1) Yes. 2) It was enabled but then I disabled it (still didn't work). 3) I looked for that option but couldn't find it.
– David
Jan 25 at 22:39
@DanielB Actually, I'm not sure if it is UEFI-bootable. When the boot options came up the name for my USB had "UEFI" in it. Does that mean that it is? This is a pretty old USB.
– David
Jan 25 at 22:47
It’s not about the USB drive itself, it’s about the data. Is there a fileEFI/boot/bootx64.efion the drive? Is the drive formatted with FAT32?
– Daniel B
Jan 25 at 22:53
@DanielB It does not have that file but it is formatted to FAT32.
– David
Jan 26 at 1:24
|
show 1 more comment
1
Is your USB drive UEFI-bootable? Do you have Secure Boot enabled? Do you have legacy boot enabled?
– Daniel B
Jan 25 at 22:17
1) Yes. 2) It was enabled but then I disabled it (still didn't work). 3) I looked for that option but couldn't find it.
– David
Jan 25 at 22:39
@DanielB Actually, I'm not sure if it is UEFI-bootable. When the boot options came up the name for my USB had "UEFI" in it. Does that mean that it is? This is a pretty old USB.
– David
Jan 25 at 22:47
It’s not about the USB drive itself, it’s about the data. Is there a fileEFI/boot/bootx64.efion the drive? Is the drive formatted with FAT32?
– Daniel B
Jan 25 at 22:53
@DanielB It does not have that file but it is formatted to FAT32.
– David
Jan 26 at 1:24
1
1
Is your USB drive UEFI-bootable? Do you have Secure Boot enabled? Do you have legacy boot enabled?
– Daniel B
Jan 25 at 22:17
Is your USB drive UEFI-bootable? Do you have Secure Boot enabled? Do you have legacy boot enabled?
– Daniel B
Jan 25 at 22:17
1) Yes. 2) It was enabled but then I disabled it (still didn't work). 3) I looked for that option but couldn't find it.
– David
Jan 25 at 22:39
1) Yes. 2) It was enabled but then I disabled it (still didn't work). 3) I looked for that option but couldn't find it.
– David
Jan 25 at 22:39
@DanielB Actually, I'm not sure if it is UEFI-bootable. When the boot options came up the name for my USB had "UEFI" in it. Does that mean that it is? This is a pretty old USB.
– David
Jan 25 at 22:47
@DanielB Actually, I'm not sure if it is UEFI-bootable. When the boot options came up the name for my USB had "UEFI" in it. Does that mean that it is? This is a pretty old USB.
– David
Jan 25 at 22:47
It’s not about the USB drive itself, it’s about the data. Is there a file
EFI/boot/bootx64.efi on the drive? Is the drive formatted with FAT32?– Daniel B
Jan 25 at 22:53
It’s not about the USB drive itself, it’s about the data. Is there a file
EFI/boot/bootx64.efi on the drive? Is the drive formatted with FAT32?– Daniel B
Jan 25 at 22:53
@DanielB It does not have that file but it is formatted to FAT32.
– David
Jan 26 at 1:24
@DanielB It does not have that file but it is formatted to FAT32.
– David
Jan 26 at 1:24
|
show 1 more comment
1 Answer
1
active
oldest
votes
Your PC is currently set to only boot using UEFI (because Secure Boot was enabled). However, the USB drive you have is not UEFI-bootable – it does not contain the required files.
Depending on how new your PC is, you may be able to switch to Legacy booting (sometimes also called BIOS booting or “CSM”). Don’t forget to turn it off again afterwards. The switch is usually located in the “Boot” section of the firmware setup.
If your PC is very new, it’s possible that it doesn’t support legacy booting at all. In that case, you won’t be able to use DBAN.
Now, on DBAN:
Using DBAN is almost always not necessary. Modern hard drives usually cannot be restored by forensic methods even after a single random wipe. (Reference) This can be easily accomplished using any modern Linux distribution: dd if=/dev/urandom of=/dev/sdX bs=4096.
On a SSD, wiping isn’t truly effective. Instead, you should use the drive’s built-in Secure Erase facility, if available. If there is none, TRIM the entire device. Only if none of these methods is available should you overwrite it.
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1398588%2fselecting-usb-boot-option-simply-boots-windows%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Your PC is currently set to only boot using UEFI (because Secure Boot was enabled). However, the USB drive you have is not UEFI-bootable – it does not contain the required files.
Depending on how new your PC is, you may be able to switch to Legacy booting (sometimes also called BIOS booting or “CSM”). Don’t forget to turn it off again afterwards. The switch is usually located in the “Boot” section of the firmware setup.
If your PC is very new, it’s possible that it doesn’t support legacy booting at all. In that case, you won’t be able to use DBAN.
Now, on DBAN:
Using DBAN is almost always not necessary. Modern hard drives usually cannot be restored by forensic methods even after a single random wipe. (Reference) This can be easily accomplished using any modern Linux distribution: dd if=/dev/urandom of=/dev/sdX bs=4096.
On a SSD, wiping isn’t truly effective. Instead, you should use the drive’s built-in Secure Erase facility, if available. If there is none, TRIM the entire device. Only if none of these methods is available should you overwrite it.
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
add a comment |
Your PC is currently set to only boot using UEFI (because Secure Boot was enabled). However, the USB drive you have is not UEFI-bootable – it does not contain the required files.
Depending on how new your PC is, you may be able to switch to Legacy booting (sometimes also called BIOS booting or “CSM”). Don’t forget to turn it off again afterwards. The switch is usually located in the “Boot” section of the firmware setup.
If your PC is very new, it’s possible that it doesn’t support legacy booting at all. In that case, you won’t be able to use DBAN.
Now, on DBAN:
Using DBAN is almost always not necessary. Modern hard drives usually cannot be restored by forensic methods even after a single random wipe. (Reference) This can be easily accomplished using any modern Linux distribution: dd if=/dev/urandom of=/dev/sdX bs=4096.
On a SSD, wiping isn’t truly effective. Instead, you should use the drive’s built-in Secure Erase facility, if available. If there is none, TRIM the entire device. Only if none of these methods is available should you overwrite it.
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
add a comment |
Your PC is currently set to only boot using UEFI (because Secure Boot was enabled). However, the USB drive you have is not UEFI-bootable – it does not contain the required files.
Depending on how new your PC is, you may be able to switch to Legacy booting (sometimes also called BIOS booting or “CSM”). Don’t forget to turn it off again afterwards. The switch is usually located in the “Boot” section of the firmware setup.
If your PC is very new, it’s possible that it doesn’t support legacy booting at all. In that case, you won’t be able to use DBAN.
Now, on DBAN:
Using DBAN is almost always not necessary. Modern hard drives usually cannot be restored by forensic methods even after a single random wipe. (Reference) This can be easily accomplished using any modern Linux distribution: dd if=/dev/urandom of=/dev/sdX bs=4096.
On a SSD, wiping isn’t truly effective. Instead, you should use the drive’s built-in Secure Erase facility, if available. If there is none, TRIM the entire device. Only if none of these methods is available should you overwrite it.
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
Your PC is currently set to only boot using UEFI (because Secure Boot was enabled). However, the USB drive you have is not UEFI-bootable – it does not contain the required files.
Depending on how new your PC is, you may be able to switch to Legacy booting (sometimes also called BIOS booting or “CSM”). Don’t forget to turn it off again afterwards. The switch is usually located in the “Boot” section of the firmware setup.
If your PC is very new, it’s possible that it doesn’t support legacy booting at all. In that case, you won’t be able to use DBAN.
Now, on DBAN:
Using DBAN is almost always not necessary. Modern hard drives usually cannot be restored by forensic methods even after a single random wipe. (Reference) This can be easily accomplished using any modern Linux distribution: dd if=/dev/urandom of=/dev/sdX bs=4096.
On a SSD, wiping isn’t truly effective. Instead, you should use the drive’s built-in Secure Erase facility, if available. If there is none, TRIM the entire device. Only if none of these methods is available should you overwrite it.
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
answered Jan 27 at 13:09
Daniel BDaniel B
34.5k76587
34.5k76587
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1398588%2fselecting-usb-boot-option-simply-boots-windows%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Is your USB drive UEFI-bootable? Do you have Secure Boot enabled? Do you have legacy boot enabled?
– Daniel B
Jan 25 at 22:17
1) Yes. 2) It was enabled but then I disabled it (still didn't work). 3) I looked for that option but couldn't find it.
– David
Jan 25 at 22:39
@DanielB Actually, I'm not sure if it is UEFI-bootable. When the boot options came up the name for my USB had "UEFI" in it. Does that mean that it is? This is a pretty old USB.
– David
Jan 25 at 22:47
It’s not about the USB drive itself, it’s about the data. Is there a file
EFI/boot/bootx64.efion the drive? Is the drive formatted with FAT32?– Daniel B
Jan 25 at 22:53
@DanielB It does not have that file but it is formatted to FAT32.
– David
Jan 26 at 1:24