Guest VM not having internet access through firewall VM
up vote
0
down vote
favorite
I'm doing the following network setup (first time with firewall) but it's not working, unsure where its going wrong.
I have a Fortigate VM firewall port 1 IP 192.168.132.5 on vmnet8(NAT) in VMWare, host vmnet8 IP is 192.168.132.1, guest VM IP is issued by DHCP from firewall (working).
I have a static route between firewall and host vmnet
The firewall VM and guest Vm can ping host vmnet8 interface but do not gain internet access.
I have created a policy to allow WAN on LAN IPs (guest VM).
Anything I'm missing.
Thank You
firewall virtualization
New contributor
add a comment |
up vote
0
down vote
favorite
I'm doing the following network setup (first time with firewall) but it's not working, unsure where its going wrong.
I have a Fortigate VM firewall port 1 IP 192.168.132.5 on vmnet8(NAT) in VMWare, host vmnet8 IP is 192.168.132.1, guest VM IP is issued by DHCP from firewall (working).
I have a static route between firewall and host vmnet
The firewall VM and guest Vm can ping host vmnet8 interface but do not gain internet access.
I have created a policy to allow WAN on LAN IPs (guest VM).
Anything I'm missing.
Thank You
firewall virtualization
New contributor
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I'm doing the following network setup (first time with firewall) but it's not working, unsure where its going wrong.
I have a Fortigate VM firewall port 1 IP 192.168.132.5 on vmnet8(NAT) in VMWare, host vmnet8 IP is 192.168.132.1, guest VM IP is issued by DHCP from firewall (working).
I have a static route between firewall and host vmnet
The firewall VM and guest Vm can ping host vmnet8 interface but do not gain internet access.
I have created a policy to allow WAN on LAN IPs (guest VM).
Anything I'm missing.
Thank You
firewall virtualization
New contributor
I'm doing the following network setup (first time with firewall) but it's not working, unsure where its going wrong.
I have a Fortigate VM firewall port 1 IP 192.168.132.5 on vmnet8(NAT) in VMWare, host vmnet8 IP is 192.168.132.1, guest VM IP is issued by DHCP from firewall (working).
I have a static route between firewall and host vmnet
The firewall VM and guest Vm can ping host vmnet8 interface but do not gain internet access.
I have created a policy to allow WAN on LAN IPs (guest VM).
Anything I'm missing.
Thank You
firewall virtualization
firewall virtualization
New contributor
New contributor
edited 16 hours ago
Nordlys Jeger
705216
705216
New contributor
asked 2 days ago
Huud Rych
113
113
New contributor
New contributor
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
up vote
1
down vote
accepted
This is now resolved.
What happened was I was setting manual IP addresses of both the WAN port 1 and the static route gateway as IP address of laptop vmnet8 which is 192.168.132.1.
What I tried was let the DHCP assign the WAN port IP and also let the static route get the IP dynamically (this was an option in the static route only showing when I allow DHCP IP assignment to WAN port 1..
I saw that the dynamically assigned static route IP is 192.168.132.2 (my laptop vmnet8 IP is 192.168.132.1), now I'm just not understanding who is assigning this IP to the static route, if its the VMware DHCP then how or to what is it getting assigned to or is it just a thing between VMWare and Fortigate.
What I have noticed is that the DHCP IP of WAN is 192.168.132.152 and not 192.168.132.2 or 3 or 4 etc, I have tested this twice.
A tracert from the guest client VM
tracert 8.8.8.8
Tracing route to google-public-dns-a.google.com [8.8.8.8]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.15.10
2 <1 ms <1 ms <1 ms 192.168.132.2 >>> IP first assigned dynamically by fortigate, then I set the same IP manually and it works.
3 22 ms 5 ms 6 ms 192.168.1.254
4 6 ms 14 ms 14 ms 192.168.10.1
5 26 ms 20 ms 21 ms 10.8.15.1
6 * 22 ms 18 ms 89.19.65.170
7 * 36 ms 25 ms 89.19.65.201
8 37 ms 79 ms 16 ms 74.125.244.1
9 15 ms 25 ms 17 ms 72.14.239.219
10 17 ms 20 ms 15 ms google-public-dns-a.google.com [8.8.8.8]
Trace complete.
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
accepted
This is now resolved.
What happened was I was setting manual IP addresses of both the WAN port 1 and the static route gateway as IP address of laptop vmnet8 which is 192.168.132.1.
What I tried was let the DHCP assign the WAN port IP and also let the static route get the IP dynamically (this was an option in the static route only showing when I allow DHCP IP assignment to WAN port 1..
I saw that the dynamically assigned static route IP is 192.168.132.2 (my laptop vmnet8 IP is 192.168.132.1), now I'm just not understanding who is assigning this IP to the static route, if its the VMware DHCP then how or to what is it getting assigned to or is it just a thing between VMWare and Fortigate.
What I have noticed is that the DHCP IP of WAN is 192.168.132.152 and not 192.168.132.2 or 3 or 4 etc, I have tested this twice.
A tracert from the guest client VM
tracert 8.8.8.8
Tracing route to google-public-dns-a.google.com [8.8.8.8]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.15.10
2 <1 ms <1 ms <1 ms 192.168.132.2 >>> IP first assigned dynamically by fortigate, then I set the same IP manually and it works.
3 22 ms 5 ms 6 ms 192.168.1.254
4 6 ms 14 ms 14 ms 192.168.10.1
5 26 ms 20 ms 21 ms 10.8.15.1
6 * 22 ms 18 ms 89.19.65.170
7 * 36 ms 25 ms 89.19.65.201
8 37 ms 79 ms 16 ms 74.125.244.1
9 15 ms 25 ms 17 ms 72.14.239.219
10 17 ms 20 ms 15 ms google-public-dns-a.google.com [8.8.8.8]
Trace complete.
add a comment |
up vote
1
down vote
accepted
This is now resolved.
What happened was I was setting manual IP addresses of both the WAN port 1 and the static route gateway as IP address of laptop vmnet8 which is 192.168.132.1.
What I tried was let the DHCP assign the WAN port IP and also let the static route get the IP dynamically (this was an option in the static route only showing when I allow DHCP IP assignment to WAN port 1..
I saw that the dynamically assigned static route IP is 192.168.132.2 (my laptop vmnet8 IP is 192.168.132.1), now I'm just not understanding who is assigning this IP to the static route, if its the VMware DHCP then how or to what is it getting assigned to or is it just a thing between VMWare and Fortigate.
What I have noticed is that the DHCP IP of WAN is 192.168.132.152 and not 192.168.132.2 or 3 or 4 etc, I have tested this twice.
A tracert from the guest client VM
tracert 8.8.8.8
Tracing route to google-public-dns-a.google.com [8.8.8.8]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.15.10
2 <1 ms <1 ms <1 ms 192.168.132.2 >>> IP first assigned dynamically by fortigate, then I set the same IP manually and it works.
3 22 ms 5 ms 6 ms 192.168.1.254
4 6 ms 14 ms 14 ms 192.168.10.1
5 26 ms 20 ms 21 ms 10.8.15.1
6 * 22 ms 18 ms 89.19.65.170
7 * 36 ms 25 ms 89.19.65.201
8 37 ms 79 ms 16 ms 74.125.244.1
9 15 ms 25 ms 17 ms 72.14.239.219
10 17 ms 20 ms 15 ms google-public-dns-a.google.com [8.8.8.8]
Trace complete.
add a comment |
up vote
1
down vote
accepted
up vote
1
down vote
accepted
This is now resolved.
What happened was I was setting manual IP addresses of both the WAN port 1 and the static route gateway as IP address of laptop vmnet8 which is 192.168.132.1.
What I tried was let the DHCP assign the WAN port IP and also let the static route get the IP dynamically (this was an option in the static route only showing when I allow DHCP IP assignment to WAN port 1..
I saw that the dynamically assigned static route IP is 192.168.132.2 (my laptop vmnet8 IP is 192.168.132.1), now I'm just not understanding who is assigning this IP to the static route, if its the VMware DHCP then how or to what is it getting assigned to or is it just a thing between VMWare and Fortigate.
What I have noticed is that the DHCP IP of WAN is 192.168.132.152 and not 192.168.132.2 or 3 or 4 etc, I have tested this twice.
A tracert from the guest client VM
tracert 8.8.8.8
Tracing route to google-public-dns-a.google.com [8.8.8.8]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.15.10
2 <1 ms <1 ms <1 ms 192.168.132.2 >>> IP first assigned dynamically by fortigate, then I set the same IP manually and it works.
3 22 ms 5 ms 6 ms 192.168.1.254
4 6 ms 14 ms 14 ms 192.168.10.1
5 26 ms 20 ms 21 ms 10.8.15.1
6 * 22 ms 18 ms 89.19.65.170
7 * 36 ms 25 ms 89.19.65.201
8 37 ms 79 ms 16 ms 74.125.244.1
9 15 ms 25 ms 17 ms 72.14.239.219
10 17 ms 20 ms 15 ms google-public-dns-a.google.com [8.8.8.8]
Trace complete.
This is now resolved.
What happened was I was setting manual IP addresses of both the WAN port 1 and the static route gateway as IP address of laptop vmnet8 which is 192.168.132.1.
What I tried was let the DHCP assign the WAN port IP and also let the static route get the IP dynamically (this was an option in the static route only showing when I allow DHCP IP assignment to WAN port 1..
I saw that the dynamically assigned static route IP is 192.168.132.2 (my laptop vmnet8 IP is 192.168.132.1), now I'm just not understanding who is assigning this IP to the static route, if its the VMware DHCP then how or to what is it getting assigned to or is it just a thing between VMWare and Fortigate.
What I have noticed is that the DHCP IP of WAN is 192.168.132.152 and not 192.168.132.2 or 3 or 4 etc, I have tested this twice.
A tracert from the guest client VM
tracert 8.8.8.8
Tracing route to google-public-dns-a.google.com [8.8.8.8]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.15.10
2 <1 ms <1 ms <1 ms 192.168.132.2 >>> IP first assigned dynamically by fortigate, then I set the same IP manually and it works.
3 22 ms 5 ms 6 ms 192.168.1.254
4 6 ms 14 ms 14 ms 192.168.10.1
5 26 ms 20 ms 21 ms 10.8.15.1
6 * 22 ms 18 ms 89.19.65.170
7 * 36 ms 25 ms 89.19.65.201
8 37 ms 79 ms 16 ms 74.125.244.1
9 15 ms 25 ms 17 ms 72.14.239.219
10 17 ms 20 ms 15 ms google-public-dns-a.google.com [8.8.8.8]
Trace complete.
answered 3 hours ago
Huud Rych
113
113
add a comment |
add a comment |
Huud Rych is a new contributor. Be nice, and check out our Code of Conduct.
Huud Rych is a new contributor. Be nice, and check out our Code of Conduct.
Huud Rych is a new contributor. Be nice, and check out our Code of Conduct.
Huud Rych is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1375383%2fguest-vm-not-having-internet-access-through-firewall-vm%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown