Tables are not working in my GitHub Pages site
up vote
0
down vote
favorite
I have a table with three columns and multiple rows. The table is working fine in the repository but if I add the .md file to my GitHub Pages site the table remains raw. I know that all the GitHub Pages will be regenerated as .html file(s) and all the HTML tags are operating respectively. How can I project the table without HTML tags?
This works:
<table>
<tr>
<th>var</th>
<th>let</th>
<th>const</th>
</tr>
<tr>
<td>
Declares a variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, local variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, read-only named constant.
</td>
</tr>
...
</table>
This doesn't:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
Here is the full source, and here is the rendered output for your reference.
github github-pages
edited Nov 18 at 14:07
Chris
52.9k17110112
asked Nov 18 at 12:12
Ram
11
add a comment |
up vote
0
down vote
favorite
I have a table with three columns and multiple rows. The table is working fine in the repository but if I add the .md file to my GitHub Pages site the table remains raw. I know that all the GitHub Pages will be regenerated as .html file(s) and all the HTML tags are operating respectively. How can I project the table without HTML tags?
This works:
<table>
<tr>
<th>var</th>
<th>let</th>
<th>const</th>
</tr>
<tr>
<td>
Declares a variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, local variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, read-only named constant.
</td>
</tr>
...
</table>
This doesn't:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
Here is the full source, and here is the rendered output for your reference.
github github-pages
edited Nov 18 at 14:07
Chris
52.9k17110112
asked Nov 18 at 12:12
Ram
11
Generally speaking, please post source. Rendered output isn't nearly as useful as seeing the code you're writing (though it can be provided for additional context). Also, please include relevant code here, directly in your question as a Minimal, Complete, and Verifiable example. We shouldn't have to go off-site to understand what you're asking, much less figure out where the source lives ourselves.
– Chris
Nov 18 at 14:02
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I have a table with three columns and multiple rows. The table is working fine in the repository but if I add the .md file to my GitHub Pages site the table remains raw. I know that all the GitHub Pages will be regenerated as .html file(s) and all the HTML tags are operating respectively. How can I project the table without HTML tags?
This works:
<table>
<tr>
<th>var</th>
<th>let</th>
<th>const</th>
</tr>
<tr>
<td>
Declares a variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, local variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, read-only named constant.
</td>
</tr>
...
</table>
This doesn't:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
Here is the full source, and here is the rendered output for your reference.
github github-pages
edited Nov 18 at 14:07
Chris
52.9k17110112
asked Nov 18 at 12:12
Ram
11
I have a table with three columns and multiple rows. The table is working fine in the repository but if I add the .md file to my GitHub Pages site the table remains raw. I know that all the GitHub Pages will be regenerated as .html file(s) and all the HTML tags are operating respectively. How can I project the table without HTML tags?
This works:
<table>
<tr>
<th>var</th>
<th>let</th>
<th>const</th>
</tr>
<tr>
<td>
Declares a variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, local variable, optionally initializing it to a value.
</td>
<td>
Declares a block-scoped, read-only named constant.
</td>
</tr>
...
</table>
This doesn't:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
Here is the full source, and here is the rendered output for your reference.
github github-pages
github github-pages
edited Nov 18 at 14:07
Chris
52.9k17110112
asked Nov 18 at 12:12
Ram
11
edited Nov 18 at 14:07
Chris
52.9k17110112
asked Nov 18 at 12:12
Ram
11
edited Nov 18 at 14:07
Chris
52.9k17110112
edited Nov 18 at 14:07
Chris
52.9k17110112
edited Nov 18 at 14:07
Chris
52.9k17110112
52.9k17110112
asked Nov 18 at 12:12
Ram
11
asked Nov 18 at 12:12
Ram
11
asked Nov 18 at 12:12
Ram
11
11
Generally speaking, please post source. Rendered output isn't nearly as useful as seeing the code you're writing (though it can be provided for additional context). Also, please include relevant code here, directly in your question as a Minimal, Complete, and Verifiable example. We shouldn't have to go off-site to understand what you're asking, much less figure out where the source lives ourselves.
– Chris
Nov 18 at 14:02
add a comment |
Generally speaking, please post source. Rendered output isn't nearly as useful as seeing the code you're writing (though it can be provided for additional context). Also, please include relevant code here, directly in your question as a Minimal, Complete, and Verifiable example. We shouldn't have to go off-site to understand what you're asking, much less figure out where the source lives ourselves.
– Chris
Nov 18 at 14:02
Generally speaking, please post source. Rendered output isn't nearly as useful as seeing the code you're writing (though it can be provided for additional context). Also, please include relevant code here, directly in your question as a Minimal, Complete, and Verifiable example. We shouldn't have to go off-site to understand what you're asking, much less figure out where the source lives ourselves.
– Chris
Nov 18 at 14:02
Generally speaking, please post source. Rendered output isn't nearly as useful as seeing the code you're writing (though it can be provided for additional context). Also, please include relevant code here, directly in your question as a Minimal, Complete, and Verifiable example. We shouldn't have to go off-site to understand what you're asking, much less figure out where the source lives ourselves.
– Chris
Nov 18 at 14:02
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
The problem is almost certainly that you've neglected to put a blank line before your table. Try this instead:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
answered Nov 18 at 14:03
Chris
52.9k17110112
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
The problem is almost certainly that you've neglected to put a blank line before your table. Try this instead:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
answered Nov 18 at 14:03
Chris
52.9k17110112
add a comment |
up vote
0
down vote
The problem is almost certainly that you've neglected to put a blank line before your table. Try this instead:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
answered Nov 18 at 14:03
Chris
52.9k17110112
add a comment |
up vote
0
down vote
up vote
0
down vote
The problem is almost certainly that you've neglected to put a blank line before your table. Try this instead:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
answered Nov 18 at 14:03
Chris
52.9k17110112
The problem is almost certainly that you've neglected to put a blank line before your table. Try this instead:
## Variable Declarations
| **var** | **let** | **const** |
|-----|-----|-----|
| Declares a variable, optionally initializing it to a value. | Declares a block-scoped, local variable, optionally initializing it to a value. | Declares a block-scoped, read-only named constant. |
| Variable declared by **`var`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`let`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. | Variable declared by **`const`** must start with a letter, underscore ( _ ) or dollar sign ($) and can contain alphabetic, numeric, or underscore characters. |
answered Nov 18 at 14:03
Chris
52.9k17110112
answered Nov 18 at 14:03
Chris
52.9k17110112
answered Nov 18 at 14:03
Chris
52.9k17110112
answered Nov 18 at 14:03
Chris
52.9k17110112
52.9k17110112
add a comment |
add a comment |
draft saved
draft discarded
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53360722%2ftables-are-not-working-in-my-github-pages-site%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Generally speaking, please post source. Rendered output isn't nearly as useful as seeing the code you're writing (though it can be provided for additional context). Also, please include relevant code here, directly in your question as a Minimal, Complete, and Verifiable example. We shouldn't have to go off-site to understand what you're asking, much less figure out where the source lives ourselves.
– Chris
Nov 18 at 14:02