Argthtjtr

I'm trying to use a gamepad under linux (kernel is 4.16.10) and I don't seem to get any input events out of it.

The device, a fake xbox 360 controller, seems to be detected as dmesg seems to report:

#dmesg when pluging in controller



[29505.029981] usb 1-2: new full-speed USB device number 29 using xhci_hcd

[29505.158111] usb 1-2: New USB device found, idVendor=2563, idProduct=0575

[29505.158116] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[29505.158119] usb 1-2: Product: PS3/PC Gamepad

[29505.158121] usb 1-2: Manufacturer: SHANWAN

[29505.160469] input: SHANWAN PS3/PC Gamepad as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:2563:0575.000D/input/input52

[29505.160604] hid-generic 0003:2563:0575.000D: input,hidraw0: USB HID v1.10 Gamepad [SHANWAN PS3/PC Gamepad] on usb-0000:00:14.0-2/input0

[29505.238365] usb 1-2: USB disconnect, device number 29

[29505.845839] usb 1-2: new full-speed USB device number 30 using xhci_hcd

[29505.974584] usb 1-2: New USB device found, idVendor=045e, idProduct=028e

[29505.974590] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[29505.974594] usb 1-2: Product: Controller

[29505.974598] usb 1-2: Manufacturer: SHANWAN

[29505.976469] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input53

I tried with both evdev and joystick drivers:

# /var/log/x-0.log with joystick driver



(II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event7)

(**) Microsoft X-Box 360 pad: Applying InputClass "joystick catchall"

(II) Using input driver 'joystick' for 'Microsoft X-Box 360 pad'

(**) Microsoft X-Box 360 pad: always reports core events

(**) Microsoft X-Box 360 pad (keys): Applying InputClass "joystick catchall"

(II) Using input driver 'joystick' for 'Microsoft X-Box 360 pad (keys)'

(**) Microsoft X-Box 360 pad (keys): always reports core events

(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input55/event7"

(II) XINPUT: Adding extended input device "Microsoft X-Box 360 pad (keys)" (type: JOYSTICK, id 18)

(**) Option "Device" "/dev/input/event7"

(**) Option "StartMouseEnabled" "False"

(**) Option "StartKeysEnabled" "False"

(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input55/event7"

(II) XINPUT: Adding extended input device "Microsoft X-Box 360 pad" (type: JOYSTICK, id 19)

(II) Joystick: Microsoft X-Box 360 pad. bus 0x3 vendor 0x45e product 0x28e version 0x110

(II) Joystick: found 8 axes, 11 buttons

JOYSTICK: DebugLevel set to 0

(**) Microsoft X-Box 360 pad: (accel) keeping acceleration scheme 1

(**) Microsoft X-Box 360 pad: (accel) acceleration profile 0

(**) Microsoft X-Box 360 pad: (accel) acceleration factor: 2.000

(**) Microsoft X-Box 360 pad: (accel) acceleration threshold: 4



# /var/log/x-0.log with evdev driver



(II) config/udev: removing device Microsoft X-Box 360 pad

(II) evdev: Microsoft X-Box 360 pad: Close

(II) UnloadModule: "evdev"

(II) config/udev: Adding input device SHANWAN PS3/PC Gamepad (/dev/input/js0)

(II) No input driver specified, ignoring this device.

(II) This device may have been added with another device file.

(II) config/udev: Adding input device (unnamed) (/dev/input/event7)

(II) No input driver specified, ignoring this device.

(II) This device may have been added with another device file.

(II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js0)

(**) Microsoft X-Box 360 pad: Applying InputClass "joystick catchall"

(II) Using input driver 'evdev' for 'Microsoft X-Box 360 pad'

(**) Microsoft X-Box 360 pad: always reports core events

(**) evdev: Microsoft X-Box 360 pad: Device: "/dev/input/js0"

(EE) evdev: Microsoft X-Box 360 pad: Unable to query fd: Invalid argument

(EE) PreInit returned 2 for "Microsoft X-Box 360 pad"

(II) UnloadModule: "evdev"

(II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event7)

(**) Microsoft X-Box 360 pad: Applying InputClass "joystick catchall"

(II) Using input driver 'evdev' for 'Microsoft X-Box 360 pad'

(**) Microsoft X-Box 360 pad: always reports core events

(**) evdev: Microsoft X-Box 360 pad: Device: "/dev/input/event7"

(--) evdev: Microsoft X-Box 360 pad: Vendor 0x45e Product 0x28e

(--) evdev: Microsoft X-Box 360 pad: Found absolute axes

(--) evdev: Microsoft X-Box 360 pad: Found x and y absolute axes

(II) evdev: Microsoft X-Box 360 pad: Forcing relative x/y axes to exist.

(II) evdev: Microsoft X-Box 360 pad: Configuring as mouse

(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input59/event7"

(II) XINPUT: Adding extended input device "Microsoft X-Box 360 pad" (type: MOUSE, id 16)

(II) evdev: Microsoft X-Box 360 pad: initialized for absolute axes.

(**) Microsoft X-Box 360 pad: (accel) keeping acceleration scheme 1

(**) Microsoft X-Box 360 pad: (accel) acceleration profile 0

(**) Microsoft X-Box 360 pad: (accel) acceleration factor: 2.000

(**) Microsoft X-Box 360 pad: (accel) acceleration threshold: 4

Yet, I'm unable to get any input events neither with jstest nor evtest (both as root and non-root). Same with xboxdrv btw.

usbmon gets datas only when pluging in and pluging out the controller. Nothing is reported when buttons are pressed.

But evdev detects sereral possible events:

# evtest



Supported events:

  Event type 0 (EV_SYN)

  Event type 1 (EV_KEY)

    Event code 304 (BTN_SOUTH)

    Event code 305 (BTN_EAST)

    Event code 307 (BTN_NORTH)

    Event code 308 (BTN_WEST)

    Event code 310 (BTN_TL)

    Event code 311 (BTN_TR)

    Event code 314 (BTN_SELECT)

    Event code 315 (BTN_START)

    Event code 316 (BTN_MODE)

    Event code 317 (BTN_THUMBL)

    Event code 318 (BTN_THUMBR)

  Event type 3 (EV_ABS)

    Event code 0 (ABS_X)

      Value      0

      Min   -32768

      Max    32767

      Fuzz      16

      Flat     128

    Event code 1 (ABS_Y)

      Value      0

      Min   -32768

      Max    32767

      Fuzz      16

      Flat     128

    Event code 2 (ABS_Z)

      Value      0

      Min        0

      Max      255

    Event code 3 (ABS_RX)

      Value      0

      Min   -32768

      Max    32767

      Fuzz      16

      Flat     128

    Event code 4 (ABS_RY)

      Value      0

      Min   -32768

      Max    32767

      Fuzz      16

      Flat     128

    Event code 5 (ABS_RZ)

      Value      0

      Min        0

      Max      255

    Event code 16 (ABS_HAT0X)

      Value      0

      Min       -1

      Max        1

    Event code 17 (ABS_HAT0Y)

      Value      0

      Min       -1

      Max        1

  Event type 21 (EV_FF)

    Event code 80 (FF_RUMBLE)

    Event code 81 (FF_PERIODIC)

    Event code 88 (FF_SQUARE)

    Event code 89 (FF_TRIANGLE)

    Event code 90 (FF_SINE)

    Event code 96 (FF_GAIN)

Bonus with Wireshark's usbmon report and a csv with windows counterpart:
https://filebin.net/n416mszk1155zbjb
(sorry but txt versions are indigest)

Does anyone has any idea or lead to find a solution to this problem?

Thanks,

If you don't get any USB traffic when pressing buttons, something on the hardware isn't working properly.

Either the hardware is broken, or it needs to be properly initialized during the phase when it announces itself as SHANWAN PS3/PC, or possibly in the incarnation as Microsoft X-Box 360 pad it expects initialization commands by the Windows driver which the Linux driver doesn't supply.

Next step would be to connect it to a computer with the proper Windows driver, see if it works there. If no, return it; if yes, sniff the USB traffic (there are Windows tools for this, google) to find out how it should be initialized.

Edit

I still don't understand the mess with the two devices (and didn't have time to look at it in detail). However, one can see that under Windows, the following exchange takes place, before key events are sent:

In:  01 03 02

Out: 01 03 02

In:  02 03 00

Out:

In:  03 03 03

Out: 

In:  08 03 00

Out: 

Under Linux, only the first line appears; there never is an answer. This could be the missing initialisation (or something else).

While looking at that, I found that xpad is the kernel driver which translates the HID events to input events, I can't see from your dmesg extract if it gets loaded. In doube, check with lsmod. (I couldn't find those sequences during a quick check of the source, though).

There also seems to be a userspace library, see e.g. here, which seems to work better than the kernel driver, so this is also worth a try.

I have the same problem, but I managed to identify the initialization sequence of the Windows driver, and based on that I wrote a python script that sends the necessary codes to the device.

This is the script, you must run it with sudo: pyusb-test.py