Windows 10 can't resolve hostnames - ping with IP works but not with hostname












7














Facts:




  1. The browser doesn't load any pages, whether they are addressed with IP or hostname.


  2. ping google.com doesn't work, returning Ping request could not find host google.com.


  3. ping 216.58.209.78 (google IP) does work, sending and receiving all packets.


  4. nslookup google.com does work, returning correct IP address that then does indeed work with ping.

  5. Network settings are default, IP and DNS are set to auto.

  6. Specifying OpenDNS in network settings does not help.

  7. There are no entries in c:windowssystem32driversetchost

  8. There are no DNS prefixes in use.


  9. netsh winsock reset & netsh int ip reset does not help.

  10. DNS client is running.

  11. The most common given solution on the Internet ipconfig /flushdns & ipconfig /registerdns does not work, with latter returning Registration of DNS records failed: Parameter is not correct. It happens occassionally to people, but I have not found possible solutions to this problem. I sense this might be the key to my ordeal.

  12. All of the above happens for different networks.

  13. The PC has been recently formatted. One guy had the same problem and it helped to restore the previous PC name, but I have no way of finding what the name was before the format.


  14. ipconfig /all is as below. The first paragraph looks a bit blank, perhaps something there...?



    Windows IP Configuration

    Host Name . . . . . . . . . . . . :
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Ethernet:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
    Physical Address. . . . . . . . . : 2C-60-0C-9B-A8-89
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter PoĄczenie lokalne* 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
    Physical Address. . . . . . . . . : AE-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter Wi-Fi:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Karta sieciowa Broadcom 802.11n
    Physical Address. . . . . . . . . : AC-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::fc42:138f:fb5a:f6ff%12(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.0.172(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : 21 grudnia 2015 22:16:55
    Lease Expires . . . . . . . . . . : 28 grudnia 2015 22:21:43
    Default Gateway . . . . . . . . . : 192.168.0.1
    DHCP Server . . . . . . . . . . . : 192.168.0.1
    DNS Servers . . . . . . . . . . . : 217.172.224.160
    192.168.0.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{9E3DA69D-E183-4041-9944-35B59277B529}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes



    1. Setting DNS to 8.8.8.8 doesn't work, see replies to suggestions beneath.


    2. It doesn't resolve local hostnames either. The machine doesn't respond to pings from local network.





Any ideas how to proceed? Help my dad enjoy his internet!










share|improve this question
























  • Is static IP and DNS working? From where are you getting DHCP info? Can you check you DHCP server configuration?
    – g2mk
    Dec 29 '15 at 21:31












  • If 192.168.0.1 is your router then try to remove 192.168.0.1 from its DNS servers... I guess that 217.172.224.160 is valid DNS server and just rejects external requests. Have you tried setup OpenDNS on your DHCP server?
    – g2mk
    Dec 29 '15 at 21:57












  • Hi, g2mk. OP here. I tried to follow your line of thought with some google-fu. Static IP and DNS do not work, I can tell that for sure. As for DHCP, I'm not sure how to reply to these questions. It is a standard and public-available DSL service supplied by one of the local Internet providers. Is DHCP on my side of things, or is it theirs? I tried following blogs.catapultsystems.com/jcwarner/archive/2011/06/27/… to get some info on my DHCP, but it doesn't recognize show server command. I'm not sure how to proceed.
    – user2551153
    Jan 4 '16 at 17:01
















7














Facts:




  1. The browser doesn't load any pages, whether they are addressed with IP or hostname.


  2. ping google.com doesn't work, returning Ping request could not find host google.com.


  3. ping 216.58.209.78 (google IP) does work, sending and receiving all packets.


  4. nslookup google.com does work, returning correct IP address that then does indeed work with ping.

  5. Network settings are default, IP and DNS are set to auto.

  6. Specifying OpenDNS in network settings does not help.

  7. There are no entries in c:windowssystem32driversetchost

  8. There are no DNS prefixes in use.


  9. netsh winsock reset & netsh int ip reset does not help.

  10. DNS client is running.

  11. The most common given solution on the Internet ipconfig /flushdns & ipconfig /registerdns does not work, with latter returning Registration of DNS records failed: Parameter is not correct. It happens occassionally to people, but I have not found possible solutions to this problem. I sense this might be the key to my ordeal.

  12. All of the above happens for different networks.

  13. The PC has been recently formatted. One guy had the same problem and it helped to restore the previous PC name, but I have no way of finding what the name was before the format.


  14. ipconfig /all is as below. The first paragraph looks a bit blank, perhaps something there...?



    Windows IP Configuration

    Host Name . . . . . . . . . . . . :
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Ethernet:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
    Physical Address. . . . . . . . . : 2C-60-0C-9B-A8-89
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter PoĄczenie lokalne* 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
    Physical Address. . . . . . . . . : AE-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter Wi-Fi:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Karta sieciowa Broadcom 802.11n
    Physical Address. . . . . . . . . : AC-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::fc42:138f:fb5a:f6ff%12(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.0.172(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : 21 grudnia 2015 22:16:55
    Lease Expires . . . . . . . . . . : 28 grudnia 2015 22:21:43
    Default Gateway . . . . . . . . . : 192.168.0.1
    DHCP Server . . . . . . . . . . . : 192.168.0.1
    DNS Servers . . . . . . . . . . . : 217.172.224.160
    192.168.0.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{9E3DA69D-E183-4041-9944-35B59277B529}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes



    1. Setting DNS to 8.8.8.8 doesn't work, see replies to suggestions beneath.


    2. It doesn't resolve local hostnames either. The machine doesn't respond to pings from local network.





Any ideas how to proceed? Help my dad enjoy his internet!










share|improve this question
























  • Is static IP and DNS working? From where are you getting DHCP info? Can you check you DHCP server configuration?
    – g2mk
    Dec 29 '15 at 21:31












  • If 192.168.0.1 is your router then try to remove 192.168.0.1 from its DNS servers... I guess that 217.172.224.160 is valid DNS server and just rejects external requests. Have you tried setup OpenDNS on your DHCP server?
    – g2mk
    Dec 29 '15 at 21:57












  • Hi, g2mk. OP here. I tried to follow your line of thought with some google-fu. Static IP and DNS do not work, I can tell that for sure. As for DHCP, I'm not sure how to reply to these questions. It is a standard and public-available DSL service supplied by one of the local Internet providers. Is DHCP on my side of things, or is it theirs? I tried following blogs.catapultsystems.com/jcwarner/archive/2011/06/27/… to get some info on my DHCP, but it doesn't recognize show server command. I'm not sure how to proceed.
    – user2551153
    Jan 4 '16 at 17:01














7












7








7


3





Facts:




  1. The browser doesn't load any pages, whether they are addressed with IP or hostname.


  2. ping google.com doesn't work, returning Ping request could not find host google.com.


  3. ping 216.58.209.78 (google IP) does work, sending and receiving all packets.


  4. nslookup google.com does work, returning correct IP address that then does indeed work with ping.

  5. Network settings are default, IP and DNS are set to auto.

  6. Specifying OpenDNS in network settings does not help.

  7. There are no entries in c:windowssystem32driversetchost

  8. There are no DNS prefixes in use.


  9. netsh winsock reset & netsh int ip reset does not help.

  10. DNS client is running.

  11. The most common given solution on the Internet ipconfig /flushdns & ipconfig /registerdns does not work, with latter returning Registration of DNS records failed: Parameter is not correct. It happens occassionally to people, but I have not found possible solutions to this problem. I sense this might be the key to my ordeal.

  12. All of the above happens for different networks.

  13. The PC has been recently formatted. One guy had the same problem and it helped to restore the previous PC name, but I have no way of finding what the name was before the format.


  14. ipconfig /all is as below. The first paragraph looks a bit blank, perhaps something there...?



    Windows IP Configuration

    Host Name . . . . . . . . . . . . :
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Ethernet:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
    Physical Address. . . . . . . . . : 2C-60-0C-9B-A8-89
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter PoĄczenie lokalne* 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
    Physical Address. . . . . . . . . : AE-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter Wi-Fi:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Karta sieciowa Broadcom 802.11n
    Physical Address. . . . . . . . . : AC-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::fc42:138f:fb5a:f6ff%12(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.0.172(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : 21 grudnia 2015 22:16:55
    Lease Expires . . . . . . . . . . : 28 grudnia 2015 22:21:43
    Default Gateway . . . . . . . . . : 192.168.0.1
    DHCP Server . . . . . . . . . . . : 192.168.0.1
    DNS Servers . . . . . . . . . . . : 217.172.224.160
    192.168.0.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{9E3DA69D-E183-4041-9944-35B59277B529}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes



    1. Setting DNS to 8.8.8.8 doesn't work, see replies to suggestions beneath.


    2. It doesn't resolve local hostnames either. The machine doesn't respond to pings from local network.





Any ideas how to proceed? Help my dad enjoy his internet!










share|improve this question















Facts:




  1. The browser doesn't load any pages, whether they are addressed with IP or hostname.


  2. ping google.com doesn't work, returning Ping request could not find host google.com.


  3. ping 216.58.209.78 (google IP) does work, sending and receiving all packets.


  4. nslookup google.com does work, returning correct IP address that then does indeed work with ping.

  5. Network settings are default, IP and DNS are set to auto.

  6. Specifying OpenDNS in network settings does not help.

  7. There are no entries in c:windowssystem32driversetchost

  8. There are no DNS prefixes in use.


  9. netsh winsock reset & netsh int ip reset does not help.

  10. DNS client is running.

  11. The most common given solution on the Internet ipconfig /flushdns & ipconfig /registerdns does not work, with latter returning Registration of DNS records failed: Parameter is not correct. It happens occassionally to people, but I have not found possible solutions to this problem. I sense this might be the key to my ordeal.

  12. All of the above happens for different networks.

  13. The PC has been recently formatted. One guy had the same problem and it helped to restore the previous PC name, but I have no way of finding what the name was before the format.


  14. ipconfig /all is as below. The first paragraph looks a bit blank, perhaps something there...?



    Windows IP Configuration

    Host Name . . . . . . . . . . . . :
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Ethernet:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
    Physical Address. . . . . . . . . : 2C-60-0C-9B-A8-89
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter PoĄczenie lokalne* 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
    Physical Address. . . . . . . . . : AE-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Wireless LAN adapter Wi-Fi:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Karta sieciowa Broadcom 802.11n
    Physical Address. . . . . . . . . : AC-E0-10-65-58-B9
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::fc42:138f:fb5a:f6ff%12(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.0.172(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : 21 grudnia 2015 22:16:55
    Lease Expires . . . . . . . . . . : 28 grudnia 2015 22:21:43
    Default Gateway . . . . . . . . . : 192.168.0.1
    DHCP Server . . . . . . . . . . . : 192.168.0.1
    DNS Servers . . . . . . . . . . . : 217.172.224.160
    192.168.0.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{9E3DA69D-E183-4041-9944-35B59277B529}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes



    1. Setting DNS to 8.8.8.8 doesn't work, see replies to suggestions beneath.


    2. It doesn't resolve local hostnames either. The machine doesn't respond to pings from local network.





Any ideas how to proceed? Help my dad enjoy his internet!







networking windows-10 dns ip ping






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Jun 17 '16 at 9:00









Donal Fellows

22516




22516










asked Dec 29 '15 at 21:03









user2551153

46116




46116












  • Is static IP and DNS working? From where are you getting DHCP info? Can you check you DHCP server configuration?
    – g2mk
    Dec 29 '15 at 21:31












  • If 192.168.0.1 is your router then try to remove 192.168.0.1 from its DNS servers... I guess that 217.172.224.160 is valid DNS server and just rejects external requests. Have you tried setup OpenDNS on your DHCP server?
    – g2mk
    Dec 29 '15 at 21:57












  • Hi, g2mk. OP here. I tried to follow your line of thought with some google-fu. Static IP and DNS do not work, I can tell that for sure. As for DHCP, I'm not sure how to reply to these questions. It is a standard and public-available DSL service supplied by one of the local Internet providers. Is DHCP on my side of things, or is it theirs? I tried following blogs.catapultsystems.com/jcwarner/archive/2011/06/27/… to get some info on my DHCP, but it doesn't recognize show server command. I'm not sure how to proceed.
    – user2551153
    Jan 4 '16 at 17:01


















  • Is static IP and DNS working? From where are you getting DHCP info? Can you check you DHCP server configuration?
    – g2mk
    Dec 29 '15 at 21:31












  • If 192.168.0.1 is your router then try to remove 192.168.0.1 from its DNS servers... I guess that 217.172.224.160 is valid DNS server and just rejects external requests. Have you tried setup OpenDNS on your DHCP server?
    – g2mk
    Dec 29 '15 at 21:57












  • Hi, g2mk. OP here. I tried to follow your line of thought with some google-fu. Static IP and DNS do not work, I can tell that for sure. As for DHCP, I'm not sure how to reply to these questions. It is a standard and public-available DSL service supplied by one of the local Internet providers. Is DHCP on my side of things, or is it theirs? I tried following blogs.catapultsystems.com/jcwarner/archive/2011/06/27/… to get some info on my DHCP, but it doesn't recognize show server command. I'm not sure how to proceed.
    – user2551153
    Jan 4 '16 at 17:01
















Is static IP and DNS working? From where are you getting DHCP info? Can you check you DHCP server configuration?
– g2mk
Dec 29 '15 at 21:31






Is static IP and DNS working? From where are you getting DHCP info? Can you check you DHCP server configuration?
– g2mk
Dec 29 '15 at 21:31














If 192.168.0.1 is your router then try to remove 192.168.0.1 from its DNS servers... I guess that 217.172.224.160 is valid DNS server and just rejects external requests. Have you tried setup OpenDNS on your DHCP server?
– g2mk
Dec 29 '15 at 21:57






If 192.168.0.1 is your router then try to remove 192.168.0.1 from its DNS servers... I guess that 217.172.224.160 is valid DNS server and just rejects external requests. Have you tried setup OpenDNS on your DHCP server?
– g2mk
Dec 29 '15 at 21:57














Hi, g2mk. OP here. I tried to follow your line of thought with some google-fu. Static IP and DNS do not work, I can tell that for sure. As for DHCP, I'm not sure how to reply to these questions. It is a standard and public-available DSL service supplied by one of the local Internet providers. Is DHCP on my side of things, or is it theirs? I tried following blogs.catapultsystems.com/jcwarner/archive/2011/06/27/… to get some info on my DHCP, but it doesn't recognize show server command. I'm not sure how to proceed.
– user2551153
Jan 4 '16 at 17:01




Hi, g2mk. OP here. I tried to follow your line of thought with some google-fu. Static IP and DNS do not work, I can tell that for sure. As for DHCP, I'm not sure how to reply to these questions. It is a standard and public-available DSL service supplied by one of the local Internet providers. Is DHCP on my side of things, or is it theirs? I tried following blogs.catapultsystems.com/jcwarner/archive/2011/06/27/… to get some info on my DHCP, but it doesn't recognize show server command. I'm not sure how to proceed.
– user2551153
Jan 4 '16 at 17:01










10 Answers
10






active

oldest

votes


















1














a. You can try to manually set the dns servers to the google ones: 8.8.8.8 and 8.8.4.4



b. You can try another wireless adapter



c. You can try a linux live cd and verify if the issues are still present






share|improve this answer





















  • a. It didn't work. See my other replies for more detail. b. It didn't work with another wireless adapter and ethernet cable.
    – user2551153
    Jan 4 '16 at 16:54










  • @user2551153 please try a linux live cd/usb (using the wired connection if possible), since your issue is strange enough to make me think of viruses/firewalls/group policy settings.
    – alexandrul
    Jan 4 '16 at 20:57



















1














In my case, I have hyper-v manager installed and has one virtual switch that bridges my NIC with it. Try disabling/removing the virtual switch in hyper-v manager (elevated user needed). This one works for me. Maybe Windows 10 or hyper-v has a buggy virtual switch.






share|improve this answer





























    0














    I've had these symptoms two or three times in the past after installing a new NIC or router, using WinXP and Win7. Solutions varied, but in one case the issue was resolved by unticking the "use NetBIOS over TCP" box. In the other case I remember having to run some unusual command line utility (not ipconfig /flushdns; something else that I don't quite recall) to flush cached somethingsomethingsomething.
    One thing I'd check is whether local (LAN side) hostnames resolve ok. If it's only WAN side hostnames that don't resolve properly then at least you know the problem is not on your PC.






    share|improve this answer





















    • Hi. I tried playing with 'use NetBIOS over TCP'. I don't know which unusual command line utility you refer to, but google often points to nbtstat -R or nbtstat -RR in this case. I tried each and it didn't change a thing. I also tried to restart the computer (does that clear the cache you refer to? I don't know. But just in case...). It doesn't resolve local hostnames either. On an interesting side-note : it doesn't respond to local pings either.
      – user2551153
      Jan 4 '16 at 16:48



















    0














    DNS issue. DHCP is not a possible culprit. Did you try setting the DNS to 8.8.8.8? Don't forget to flush the dnscache between changes.






    share|improve this answer





















    • Hi, Dr. Ping. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
      – user2551153
      Jan 4 '16 at 16:21










    • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
      – user2551153
      Jan 4 '16 at 16:22



















    0














    You indicate that nslookup works. What is the name of the DNS server being queried? That may provide you with some hint as to where your system is getting it's information and allow you to make corrections...if it does not match your expected output.



    Jeremys-iMac:~ jeremy$ nslookup google.com
    Server: 2001:4860:4860::8888
    Address: 2001:4860:4860::8888#53



    Non-authoritative answer:
    Name: google.com
    Address: 216.58.216.14






    share|improve this answer





















    • Hi, Jeremy. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
      – user2551153
      Jan 4 '16 at 16:23










    • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
      – user2551153
      Jan 4 '16 at 16:24



















    0














    The fact that the computer was recently reformatted could indicate a problem with the drivers for your network adapter(s).



    Open "View network connections" and try disabling each adapter one-by-one. After disabling each one, test the DNS and then re-enable it. Perhaps you'll find one that's causing your DNS problems - if you do, you could try reinstalling the driver for that particular adapter.






    share|improve this answer





















    • It has to be a DNS problem. If you can ping the IP but it doesn't resolve, that's got to be the issue.
      – user1780242
      Dec 30 '15 at 2:35










    • Agreed, but DNS goes through the network adapter. It's entirely possible that the driver for the network adapter has a bug that's interfering with DNS. I was particularly suspicious of the "Microsoft Wi-Fi Direct Virtual Adapter" in your ipconfig dump. It's Microsoft-made, but I'm not clear on what it actually does.
      – LevenTech
      Dec 30 '15 at 4:16












    • Hi, man. OP here. I tried doing as you said, but all entries I see under 'view network connections' are: Ethernet (Realtek PCIe GBE Family Controller) and Wi-Fi (Network card Broadcom 802.11n). There was no Microsoft Wi-Fi Direct Virtual Adapter or anything else. I disabled / re-enabled both of them : the first one didn't really change a thing, and the second one was wi-fi so there was no connection whatsoever. I also tried following steps on windows.microsoft.com/en-us/windows/… but it produced same results.
      – user2551153
      Jan 4 '16 at 16:32



















    0














    I just came across this same issue on a Windows 10 Dell tablet that one of my users brought into the office. Same issue, communications via IP work, but name resolution not working (aside from nslookup, oddly that was working fine).



    After digging into this for a few minutes I also discovered that the tablet was missing a hostname entry when doing an ipconfig /all (same as shown in your screenshot above), so I went into the System properties and found that there was no computer name set in there. Added a computer name, rebooted, et voila! Name resolution is now working properly.






    share|improve this answer





























      0














      I had the same issue (probably after a heat crash). Took me hours to figure out that the HOSTNAME of the machine was deleted. Reentered it (including primary DNS-domain and workgroup name) and everything runs fine again. Good luck!






      share|improve this answer





























        -1














        All the things suggested by other posters failed, so I resorted to drastic measures and did a full format with a fresh Win 10 install. It did work.






        share|improve this answer

















        • 8




          That's like "healing the disease by killing the patient". This shouldn't be the accepted answer.
          – Fábio Antunes
          Nov 27 '16 at 14:38










        • I agree. It's just that none of the suggestions worked and I did check each of them diligently. I'm sorry we couldn't reach a fruitful conclusion.
          – user2551153
          Mar 22 '17 at 13:49



















        -1














        The answer is in the first section of the ipconfig.



        Windows IP Configuration

        Host Name . . . . . . . . . . . . :
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No


        Host name is blank.



        Set the computer name in Control PanelSystem and SecuritySystem, and all will be well.






        share|improve this answer










        New contributor




        Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
        Check out our Code of Conduct.


















          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "3"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1019467%2fwindows-10-cant-resolve-hostnames-ping-with-ip-works-but-not-with-hostname%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          10 Answers
          10






          active

          oldest

          votes








          10 Answers
          10






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          1














          a. You can try to manually set the dns servers to the google ones: 8.8.8.8 and 8.8.4.4



          b. You can try another wireless adapter



          c. You can try a linux live cd and verify if the issues are still present






          share|improve this answer





















          • a. It didn't work. See my other replies for more detail. b. It didn't work with another wireless adapter and ethernet cable.
            – user2551153
            Jan 4 '16 at 16:54










          • @user2551153 please try a linux live cd/usb (using the wired connection if possible), since your issue is strange enough to make me think of viruses/firewalls/group policy settings.
            – alexandrul
            Jan 4 '16 at 20:57
















          1














          a. You can try to manually set the dns servers to the google ones: 8.8.8.8 and 8.8.4.4



          b. You can try another wireless adapter



          c. You can try a linux live cd and verify if the issues are still present






          share|improve this answer





















          • a. It didn't work. See my other replies for more detail. b. It didn't work with another wireless adapter and ethernet cable.
            – user2551153
            Jan 4 '16 at 16:54










          • @user2551153 please try a linux live cd/usb (using the wired connection if possible), since your issue is strange enough to make me think of viruses/firewalls/group policy settings.
            – alexandrul
            Jan 4 '16 at 20:57














          1












          1








          1






          a. You can try to manually set the dns servers to the google ones: 8.8.8.8 and 8.8.4.4



          b. You can try another wireless adapter



          c. You can try a linux live cd and verify if the issues are still present






          share|improve this answer












          a. You can try to manually set the dns servers to the google ones: 8.8.8.8 and 8.8.4.4



          b. You can try another wireless adapter



          c. You can try a linux live cd and verify if the issues are still present







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Dec 29 '15 at 21:20









          alexandrul

          9151520




          9151520












          • a. It didn't work. See my other replies for more detail. b. It didn't work with another wireless adapter and ethernet cable.
            – user2551153
            Jan 4 '16 at 16:54










          • @user2551153 please try a linux live cd/usb (using the wired connection if possible), since your issue is strange enough to make me think of viruses/firewalls/group policy settings.
            – alexandrul
            Jan 4 '16 at 20:57


















          • a. It didn't work. See my other replies for more detail. b. It didn't work with another wireless adapter and ethernet cable.
            – user2551153
            Jan 4 '16 at 16:54










          • @user2551153 please try a linux live cd/usb (using the wired connection if possible), since your issue is strange enough to make me think of viruses/firewalls/group policy settings.
            – alexandrul
            Jan 4 '16 at 20:57
















          a. It didn't work. See my other replies for more detail. b. It didn't work with another wireless adapter and ethernet cable.
          – user2551153
          Jan 4 '16 at 16:54




          a. It didn't work. See my other replies for more detail. b. It didn't work with another wireless adapter and ethernet cable.
          – user2551153
          Jan 4 '16 at 16:54












          @user2551153 please try a linux live cd/usb (using the wired connection if possible), since your issue is strange enough to make me think of viruses/firewalls/group policy settings.
          – alexandrul
          Jan 4 '16 at 20:57




          @user2551153 please try a linux live cd/usb (using the wired connection if possible), since your issue is strange enough to make me think of viruses/firewalls/group policy settings.
          – alexandrul
          Jan 4 '16 at 20:57













          1














          In my case, I have hyper-v manager installed and has one virtual switch that bridges my NIC with it. Try disabling/removing the virtual switch in hyper-v manager (elevated user needed). This one works for me. Maybe Windows 10 or hyper-v has a buggy virtual switch.






          share|improve this answer


























            1














            In my case, I have hyper-v manager installed and has one virtual switch that bridges my NIC with it. Try disabling/removing the virtual switch in hyper-v manager (elevated user needed). This one works for me. Maybe Windows 10 or hyper-v has a buggy virtual switch.






            share|improve this answer
























              1












              1








              1






              In my case, I have hyper-v manager installed and has one virtual switch that bridges my NIC with it. Try disabling/removing the virtual switch in hyper-v manager (elevated user needed). This one works for me. Maybe Windows 10 or hyper-v has a buggy virtual switch.






              share|improve this answer












              In my case, I have hyper-v manager installed and has one virtual switch that bridges my NIC with it. Try disabling/removing the virtual switch in hyper-v manager (elevated user needed). This one works for me. Maybe Windows 10 or hyper-v has a buggy virtual switch.







              share|improve this answer












              share|improve this answer



              share|improve this answer










              answered Mar 24 '17 at 16:05









              karlo

              111




              111























                  0














                  I've had these symptoms two or three times in the past after installing a new NIC or router, using WinXP and Win7. Solutions varied, but in one case the issue was resolved by unticking the "use NetBIOS over TCP" box. In the other case I remember having to run some unusual command line utility (not ipconfig /flushdns; something else that I don't quite recall) to flush cached somethingsomethingsomething.
                  One thing I'd check is whether local (LAN side) hostnames resolve ok. If it's only WAN side hostnames that don't resolve properly then at least you know the problem is not on your PC.






                  share|improve this answer





















                  • Hi. I tried playing with 'use NetBIOS over TCP'. I don't know which unusual command line utility you refer to, but google often points to nbtstat -R or nbtstat -RR in this case. I tried each and it didn't change a thing. I also tried to restart the computer (does that clear the cache you refer to? I don't know. But just in case...). It doesn't resolve local hostnames either. On an interesting side-note : it doesn't respond to local pings either.
                    – user2551153
                    Jan 4 '16 at 16:48
















                  0














                  I've had these symptoms two or three times in the past after installing a new NIC or router, using WinXP and Win7. Solutions varied, but in one case the issue was resolved by unticking the "use NetBIOS over TCP" box. In the other case I remember having to run some unusual command line utility (not ipconfig /flushdns; something else that I don't quite recall) to flush cached somethingsomethingsomething.
                  One thing I'd check is whether local (LAN side) hostnames resolve ok. If it's only WAN side hostnames that don't resolve properly then at least you know the problem is not on your PC.






                  share|improve this answer





















                  • Hi. I tried playing with 'use NetBIOS over TCP'. I don't know which unusual command line utility you refer to, but google often points to nbtstat -R or nbtstat -RR in this case. I tried each and it didn't change a thing. I also tried to restart the computer (does that clear the cache you refer to? I don't know. But just in case...). It doesn't resolve local hostnames either. On an interesting side-note : it doesn't respond to local pings either.
                    – user2551153
                    Jan 4 '16 at 16:48














                  0












                  0








                  0






                  I've had these symptoms two or three times in the past after installing a new NIC or router, using WinXP and Win7. Solutions varied, but in one case the issue was resolved by unticking the "use NetBIOS over TCP" box. In the other case I remember having to run some unusual command line utility (not ipconfig /flushdns; something else that I don't quite recall) to flush cached somethingsomethingsomething.
                  One thing I'd check is whether local (LAN side) hostnames resolve ok. If it's only WAN side hostnames that don't resolve properly then at least you know the problem is not on your PC.






                  share|improve this answer












                  I've had these symptoms two or three times in the past after installing a new NIC or router, using WinXP and Win7. Solutions varied, but in one case the issue was resolved by unticking the "use NetBIOS over TCP" box. In the other case I remember having to run some unusual command line utility (not ipconfig /flushdns; something else that I don't quite recall) to flush cached somethingsomethingsomething.
                  One thing I'd check is whether local (LAN side) hostnames resolve ok. If it's only WAN side hostnames that don't resolve properly then at least you know the problem is not on your PC.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Dec 29 '15 at 21:40









                  HamishKL

                  101




                  101












                  • Hi. I tried playing with 'use NetBIOS over TCP'. I don't know which unusual command line utility you refer to, but google often points to nbtstat -R or nbtstat -RR in this case. I tried each and it didn't change a thing. I also tried to restart the computer (does that clear the cache you refer to? I don't know. But just in case...). It doesn't resolve local hostnames either. On an interesting side-note : it doesn't respond to local pings either.
                    – user2551153
                    Jan 4 '16 at 16:48


















                  • Hi. I tried playing with 'use NetBIOS over TCP'. I don't know which unusual command line utility you refer to, but google often points to nbtstat -R or nbtstat -RR in this case. I tried each and it didn't change a thing. I also tried to restart the computer (does that clear the cache you refer to? I don't know. But just in case...). It doesn't resolve local hostnames either. On an interesting side-note : it doesn't respond to local pings either.
                    – user2551153
                    Jan 4 '16 at 16:48
















                  Hi. I tried playing with 'use NetBIOS over TCP'. I don't know which unusual command line utility you refer to, but google often points to nbtstat -R or nbtstat -RR in this case. I tried each and it didn't change a thing. I also tried to restart the computer (does that clear the cache you refer to? I don't know. But just in case...). It doesn't resolve local hostnames either. On an interesting side-note : it doesn't respond to local pings either.
                  – user2551153
                  Jan 4 '16 at 16:48




                  Hi. I tried playing with 'use NetBIOS over TCP'. I don't know which unusual command line utility you refer to, but google often points to nbtstat -R or nbtstat -RR in this case. I tried each and it didn't change a thing. I also tried to restart the computer (does that clear the cache you refer to? I don't know. But just in case...). It doesn't resolve local hostnames either. On an interesting side-note : it doesn't respond to local pings either.
                  – user2551153
                  Jan 4 '16 at 16:48











                  0














                  DNS issue. DHCP is not a possible culprit. Did you try setting the DNS to 8.8.8.8? Don't forget to flush the dnscache between changes.






                  share|improve this answer





















                  • Hi, Dr. Ping. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:21










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:22
















                  0














                  DNS issue. DHCP is not a possible culprit. Did you try setting the DNS to 8.8.8.8? Don't forget to flush the dnscache between changes.






                  share|improve this answer





















                  • Hi, Dr. Ping. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:21










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:22














                  0












                  0








                  0






                  DNS issue. DHCP is not a possible culprit. Did you try setting the DNS to 8.8.8.8? Don't forget to flush the dnscache between changes.






                  share|improve this answer












                  DNS issue. DHCP is not a possible culprit. Did you try setting the DNS to 8.8.8.8? Don't forget to flush the dnscache between changes.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Dec 29 '15 at 22:54









                  Dr.Ping

                  1098




                  1098












                  • Hi, Dr. Ping. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:21










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:22


















                  • Hi, Dr. Ping. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:21










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:22
















                  Hi, Dr. Ping. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                  – user2551153
                  Jan 4 '16 at 16:21




                  Hi, Dr. Ping. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                  – user2551153
                  Jan 4 '16 at 16:21












                  2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                  – user2551153
                  Jan 4 '16 at 16:22




                  2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                  – user2551153
                  Jan 4 '16 at 16:22











                  0














                  You indicate that nslookup works. What is the name of the DNS server being queried? That may provide you with some hint as to where your system is getting it's information and allow you to make corrections...if it does not match your expected output.



                  Jeremys-iMac:~ jeremy$ nslookup google.com
                  Server: 2001:4860:4860::8888
                  Address: 2001:4860:4860::8888#53



                  Non-authoritative answer:
                  Name: google.com
                  Address: 216.58.216.14






                  share|improve this answer





















                  • Hi, Jeremy. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:23










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:24
















                  0














                  You indicate that nslookup works. What is the name of the DNS server being queried? That may provide you with some hint as to where your system is getting it's information and allow you to make corrections...if it does not match your expected output.



                  Jeremys-iMac:~ jeremy$ nslookup google.com
                  Server: 2001:4860:4860::8888
                  Address: 2001:4860:4860::8888#53



                  Non-authoritative answer:
                  Name: google.com
                  Address: 216.58.216.14






                  share|improve this answer





















                  • Hi, Jeremy. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:23










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:24














                  0












                  0








                  0






                  You indicate that nslookup works. What is the name of the DNS server being queried? That may provide you with some hint as to where your system is getting it's information and allow you to make corrections...if it does not match your expected output.



                  Jeremys-iMac:~ jeremy$ nslookup google.com
                  Server: 2001:4860:4860::8888
                  Address: 2001:4860:4860::8888#53



                  Non-authoritative answer:
                  Name: google.com
                  Address: 216.58.216.14






                  share|improve this answer












                  You indicate that nslookup works. What is the name of the DNS server being queried? That may provide you with some hint as to where your system is getting it's information and allow you to make corrections...if it does not match your expected output.



                  Jeremys-iMac:~ jeremy$ nslookup google.com
                  Server: 2001:4860:4860::8888
                  Address: 2001:4860:4860::8888#53



                  Non-authoritative answer:
                  Name: google.com
                  Address: 216.58.216.14







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Dec 30 '15 at 1:07









                  Jeremy J Einsweiler

                  111




                  111












                  • Hi, Jeremy. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:23










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:24


















                  • Hi, Jeremy. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                    – user2551153
                    Jan 4 '16 at 16:23










                  • 2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                    – user2551153
                    Jan 4 '16 at 16:24
















                  Hi, Jeremy. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                  – user2551153
                  Jan 4 '16 at 16:23




                  Hi, Jeremy. Thanks for your input. I did try setting DNS to 8.8.8.8. When IPv4 DNS is set to 8.8.8.8 and IPv6 is set to auto, it works like this: nslookup google.com Server: google-public-dns.a.google.com Address: 8.8.8.8 Non authoritative answer: Name: google.com Addresses: 2a00:1450:401 :801:200e 216.58.209.46 which I suppose is okay. When I set IPv4 to 8.8.8.8 and similarly IPv6 to 2001:4860:4860::8888 (IPv6 of google DNS) it works like this nslookup google.com Server: UnKnown Address: 2001:.... *** UnKnown can't find google.com: No response from server. IPv6 can't be set to 8.8.8.8
                  – user2551153
                  Jan 4 '16 at 16:23












                  2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                  – user2551153
                  Jan 4 '16 at 16:24




                  2/2 ... And when I set IPv4 to 8.8.8.8 and disable IPv6 altogether, it works the same as when IPv6 is set to auto. ping google.com doesn't work in any of these cases.
                  – user2551153
                  Jan 4 '16 at 16:24











                  0














                  The fact that the computer was recently reformatted could indicate a problem with the drivers for your network adapter(s).



                  Open "View network connections" and try disabling each adapter one-by-one. After disabling each one, test the DNS and then re-enable it. Perhaps you'll find one that's causing your DNS problems - if you do, you could try reinstalling the driver for that particular adapter.






                  share|improve this answer





















                  • It has to be a DNS problem. If you can ping the IP but it doesn't resolve, that's got to be the issue.
                    – user1780242
                    Dec 30 '15 at 2:35










                  • Agreed, but DNS goes through the network adapter. It's entirely possible that the driver for the network adapter has a bug that's interfering with DNS. I was particularly suspicious of the "Microsoft Wi-Fi Direct Virtual Adapter" in your ipconfig dump. It's Microsoft-made, but I'm not clear on what it actually does.
                    – LevenTech
                    Dec 30 '15 at 4:16












                  • Hi, man. OP here. I tried doing as you said, but all entries I see under 'view network connections' are: Ethernet (Realtek PCIe GBE Family Controller) and Wi-Fi (Network card Broadcom 802.11n). There was no Microsoft Wi-Fi Direct Virtual Adapter or anything else. I disabled / re-enabled both of them : the first one didn't really change a thing, and the second one was wi-fi so there was no connection whatsoever. I also tried following steps on windows.microsoft.com/en-us/windows/… but it produced same results.
                    – user2551153
                    Jan 4 '16 at 16:32
















                  0














                  The fact that the computer was recently reformatted could indicate a problem with the drivers for your network adapter(s).



                  Open "View network connections" and try disabling each adapter one-by-one. After disabling each one, test the DNS and then re-enable it. Perhaps you'll find one that's causing your DNS problems - if you do, you could try reinstalling the driver for that particular adapter.






                  share|improve this answer





















                  • It has to be a DNS problem. If you can ping the IP but it doesn't resolve, that's got to be the issue.
                    – user1780242
                    Dec 30 '15 at 2:35










                  • Agreed, but DNS goes through the network adapter. It's entirely possible that the driver for the network adapter has a bug that's interfering with DNS. I was particularly suspicious of the "Microsoft Wi-Fi Direct Virtual Adapter" in your ipconfig dump. It's Microsoft-made, but I'm not clear on what it actually does.
                    – LevenTech
                    Dec 30 '15 at 4:16












                  • Hi, man. OP here. I tried doing as you said, but all entries I see under 'view network connections' are: Ethernet (Realtek PCIe GBE Family Controller) and Wi-Fi (Network card Broadcom 802.11n). There was no Microsoft Wi-Fi Direct Virtual Adapter or anything else. I disabled / re-enabled both of them : the first one didn't really change a thing, and the second one was wi-fi so there was no connection whatsoever. I also tried following steps on windows.microsoft.com/en-us/windows/… but it produced same results.
                    – user2551153
                    Jan 4 '16 at 16:32














                  0












                  0








                  0






                  The fact that the computer was recently reformatted could indicate a problem with the drivers for your network adapter(s).



                  Open "View network connections" and try disabling each adapter one-by-one. After disabling each one, test the DNS and then re-enable it. Perhaps you'll find one that's causing your DNS problems - if you do, you could try reinstalling the driver for that particular adapter.






                  share|improve this answer












                  The fact that the computer was recently reformatted could indicate a problem with the drivers for your network adapter(s).



                  Open "View network connections" and try disabling each adapter one-by-one. After disabling each one, test the DNS and then re-enable it. Perhaps you'll find one that's causing your DNS problems - if you do, you could try reinstalling the driver for that particular adapter.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Dec 30 '15 at 2:00









                  LevenTech

                  862415




                  862415












                  • It has to be a DNS problem. If you can ping the IP but it doesn't resolve, that's got to be the issue.
                    – user1780242
                    Dec 30 '15 at 2:35










                  • Agreed, but DNS goes through the network adapter. It's entirely possible that the driver for the network adapter has a bug that's interfering with DNS. I was particularly suspicious of the "Microsoft Wi-Fi Direct Virtual Adapter" in your ipconfig dump. It's Microsoft-made, but I'm not clear on what it actually does.
                    – LevenTech
                    Dec 30 '15 at 4:16












                  • Hi, man. OP here. I tried doing as you said, but all entries I see under 'view network connections' are: Ethernet (Realtek PCIe GBE Family Controller) and Wi-Fi (Network card Broadcom 802.11n). There was no Microsoft Wi-Fi Direct Virtual Adapter or anything else. I disabled / re-enabled both of them : the first one didn't really change a thing, and the second one was wi-fi so there was no connection whatsoever. I also tried following steps on windows.microsoft.com/en-us/windows/… but it produced same results.
                    – user2551153
                    Jan 4 '16 at 16:32


















                  • It has to be a DNS problem. If you can ping the IP but it doesn't resolve, that's got to be the issue.
                    – user1780242
                    Dec 30 '15 at 2:35










                  • Agreed, but DNS goes through the network adapter. It's entirely possible that the driver for the network adapter has a bug that's interfering with DNS. I was particularly suspicious of the "Microsoft Wi-Fi Direct Virtual Adapter" in your ipconfig dump. It's Microsoft-made, but I'm not clear on what it actually does.
                    – LevenTech
                    Dec 30 '15 at 4:16












                  • Hi, man. OP here. I tried doing as you said, but all entries I see under 'view network connections' are: Ethernet (Realtek PCIe GBE Family Controller) and Wi-Fi (Network card Broadcom 802.11n). There was no Microsoft Wi-Fi Direct Virtual Adapter or anything else. I disabled / re-enabled both of them : the first one didn't really change a thing, and the second one was wi-fi so there was no connection whatsoever. I also tried following steps on windows.microsoft.com/en-us/windows/… but it produced same results.
                    – user2551153
                    Jan 4 '16 at 16:32
















                  It has to be a DNS problem. If you can ping the IP but it doesn't resolve, that's got to be the issue.
                  – user1780242
                  Dec 30 '15 at 2:35




                  It has to be a DNS problem. If you can ping the IP but it doesn't resolve, that's got to be the issue.
                  – user1780242
                  Dec 30 '15 at 2:35












                  Agreed, but DNS goes through the network adapter. It's entirely possible that the driver for the network adapter has a bug that's interfering with DNS. I was particularly suspicious of the "Microsoft Wi-Fi Direct Virtual Adapter" in your ipconfig dump. It's Microsoft-made, but I'm not clear on what it actually does.
                  – LevenTech
                  Dec 30 '15 at 4:16






                  Agreed, but DNS goes through the network adapter. It's entirely possible that the driver for the network adapter has a bug that's interfering with DNS. I was particularly suspicious of the "Microsoft Wi-Fi Direct Virtual Adapter" in your ipconfig dump. It's Microsoft-made, but I'm not clear on what it actually does.
                  – LevenTech
                  Dec 30 '15 at 4:16














                  Hi, man. OP here. I tried doing as you said, but all entries I see under 'view network connections' are: Ethernet (Realtek PCIe GBE Family Controller) and Wi-Fi (Network card Broadcom 802.11n). There was no Microsoft Wi-Fi Direct Virtual Adapter or anything else. I disabled / re-enabled both of them : the first one didn't really change a thing, and the second one was wi-fi so there was no connection whatsoever. I also tried following steps on windows.microsoft.com/en-us/windows/… but it produced same results.
                  – user2551153
                  Jan 4 '16 at 16:32




                  Hi, man. OP here. I tried doing as you said, but all entries I see under 'view network connections' are: Ethernet (Realtek PCIe GBE Family Controller) and Wi-Fi (Network card Broadcom 802.11n). There was no Microsoft Wi-Fi Direct Virtual Adapter or anything else. I disabled / re-enabled both of them : the first one didn't really change a thing, and the second one was wi-fi so there was no connection whatsoever. I also tried following steps on windows.microsoft.com/en-us/windows/… but it produced same results.
                  – user2551153
                  Jan 4 '16 at 16:32











                  0














                  I just came across this same issue on a Windows 10 Dell tablet that one of my users brought into the office. Same issue, communications via IP work, but name resolution not working (aside from nslookup, oddly that was working fine).



                  After digging into this for a few minutes I also discovered that the tablet was missing a hostname entry when doing an ipconfig /all (same as shown in your screenshot above), so I went into the System properties and found that there was no computer name set in there. Added a computer name, rebooted, et voila! Name resolution is now working properly.






                  share|improve this answer


























                    0














                    I just came across this same issue on a Windows 10 Dell tablet that one of my users brought into the office. Same issue, communications via IP work, but name resolution not working (aside from nslookup, oddly that was working fine).



                    After digging into this for a few minutes I also discovered that the tablet was missing a hostname entry when doing an ipconfig /all (same as shown in your screenshot above), so I went into the System properties and found that there was no computer name set in there. Added a computer name, rebooted, et voila! Name resolution is now working properly.






                    share|improve this answer
























                      0












                      0








                      0






                      I just came across this same issue on a Windows 10 Dell tablet that one of my users brought into the office. Same issue, communications via IP work, but name resolution not working (aside from nslookup, oddly that was working fine).



                      After digging into this for a few minutes I also discovered that the tablet was missing a hostname entry when doing an ipconfig /all (same as shown in your screenshot above), so I went into the System properties and found that there was no computer name set in there. Added a computer name, rebooted, et voila! Name resolution is now working properly.






                      share|improve this answer












                      I just came across this same issue on a Windows 10 Dell tablet that one of my users brought into the office. Same issue, communications via IP work, but name resolution not working (aside from nslookup, oddly that was working fine).



                      After digging into this for a few minutes I also discovered that the tablet was missing a hostname entry when doing an ipconfig /all (same as shown in your screenshot above), so I went into the System properties and found that there was no computer name set in there. Added a computer name, rebooted, et voila! Name resolution is now working properly.







                      share|improve this answer












                      share|improve this answer



                      share|improve this answer










                      answered Sep 23 '16 at 16:31









                      MeNTaLMoNKeY

                      713




                      713























                          0














                          I had the same issue (probably after a heat crash). Took me hours to figure out that the HOSTNAME of the machine was deleted. Reentered it (including primary DNS-domain and workgroup name) and everything runs fine again. Good luck!






                          share|improve this answer


























                            0














                            I had the same issue (probably after a heat crash). Took me hours to figure out that the HOSTNAME of the machine was deleted. Reentered it (including primary DNS-domain and workgroup name) and everything runs fine again. Good luck!






                            share|improve this answer
























                              0












                              0








                              0






                              I had the same issue (probably after a heat crash). Took me hours to figure out that the HOSTNAME of the machine was deleted. Reentered it (including primary DNS-domain and workgroup name) and everything runs fine again. Good luck!






                              share|improve this answer












                              I had the same issue (probably after a heat crash). Took me hours to figure out that the HOSTNAME of the machine was deleted. Reentered it (including primary DNS-domain and workgroup name) and everything runs fine again. Good luck!







                              share|improve this answer












                              share|improve this answer



                              share|improve this answer










                              answered Dec 10 at 16:32









                              Martin

                              1




                              1























                                  -1














                                  All the things suggested by other posters failed, so I resorted to drastic measures and did a full format with a fresh Win 10 install. It did work.






                                  share|improve this answer

















                                  • 8




                                    That's like "healing the disease by killing the patient". This shouldn't be the accepted answer.
                                    – Fábio Antunes
                                    Nov 27 '16 at 14:38










                                  • I agree. It's just that none of the suggestions worked and I did check each of them diligently. I'm sorry we couldn't reach a fruitful conclusion.
                                    – user2551153
                                    Mar 22 '17 at 13:49
















                                  -1














                                  All the things suggested by other posters failed, so I resorted to drastic measures and did a full format with a fresh Win 10 install. It did work.






                                  share|improve this answer

















                                  • 8




                                    That's like "healing the disease by killing the patient". This shouldn't be the accepted answer.
                                    – Fábio Antunes
                                    Nov 27 '16 at 14:38










                                  • I agree. It's just that none of the suggestions worked and I did check each of them diligently. I'm sorry we couldn't reach a fruitful conclusion.
                                    – user2551153
                                    Mar 22 '17 at 13:49














                                  -1












                                  -1








                                  -1






                                  All the things suggested by other posters failed, so I resorted to drastic measures and did a full format with a fresh Win 10 install. It did work.






                                  share|improve this answer












                                  All the things suggested by other posters failed, so I resorted to drastic measures and did a full format with a fresh Win 10 install. It did work.







                                  share|improve this answer












                                  share|improve this answer



                                  share|improve this answer










                                  answered Jan 10 '16 at 17:43









                                  user2551153

                                  46116




                                  46116








                                  • 8




                                    That's like "healing the disease by killing the patient". This shouldn't be the accepted answer.
                                    – Fábio Antunes
                                    Nov 27 '16 at 14:38










                                  • I agree. It's just that none of the suggestions worked and I did check each of them diligently. I'm sorry we couldn't reach a fruitful conclusion.
                                    – user2551153
                                    Mar 22 '17 at 13:49














                                  • 8




                                    That's like "healing the disease by killing the patient". This shouldn't be the accepted answer.
                                    – Fábio Antunes
                                    Nov 27 '16 at 14:38










                                  • I agree. It's just that none of the suggestions worked and I did check each of them diligently. I'm sorry we couldn't reach a fruitful conclusion.
                                    – user2551153
                                    Mar 22 '17 at 13:49








                                  8




                                  8




                                  That's like "healing the disease by killing the patient". This shouldn't be the accepted answer.
                                  – Fábio Antunes
                                  Nov 27 '16 at 14:38




                                  That's like "healing the disease by killing the patient". This shouldn't be the accepted answer.
                                  – Fábio Antunes
                                  Nov 27 '16 at 14:38












                                  I agree. It's just that none of the suggestions worked and I did check each of them diligently. I'm sorry we couldn't reach a fruitful conclusion.
                                  – user2551153
                                  Mar 22 '17 at 13:49




                                  I agree. It's just that none of the suggestions worked and I did check each of them diligently. I'm sorry we couldn't reach a fruitful conclusion.
                                  – user2551153
                                  Mar 22 '17 at 13:49











                                  -1














                                  The answer is in the first section of the ipconfig.



                                  Windows IP Configuration

                                  Host Name . . . . . . . . . . . . :
                                  Primary Dns Suffix . . . . . . . :
                                  Node Type . . . . . . . . . . . . : Hybrid
                                  IP Routing Enabled. . . . . . . . : No
                                  WINS Proxy Enabled. . . . . . . . : No


                                  Host name is blank.



                                  Set the computer name in Control PanelSystem and SecuritySystem, and all will be well.






                                  share|improve this answer










                                  New contributor




                                  Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                  Check out our Code of Conduct.























                                    -1














                                    The answer is in the first section of the ipconfig.



                                    Windows IP Configuration

                                    Host Name . . . . . . . . . . . . :
                                    Primary Dns Suffix . . . . . . . :
                                    Node Type . . . . . . . . . . . . : Hybrid
                                    IP Routing Enabled. . . . . . . . : No
                                    WINS Proxy Enabled. . . . . . . . : No


                                    Host name is blank.



                                    Set the computer name in Control PanelSystem and SecuritySystem, and all will be well.






                                    share|improve this answer










                                    New contributor




                                    Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                    Check out our Code of Conduct.





















                                      -1












                                      -1








                                      -1






                                      The answer is in the first section of the ipconfig.



                                      Windows IP Configuration

                                      Host Name . . . . . . . . . . . . :
                                      Primary Dns Suffix . . . . . . . :
                                      Node Type . . . . . . . . . . . . : Hybrid
                                      IP Routing Enabled. . . . . . . . : No
                                      WINS Proxy Enabled. . . . . . . . : No


                                      Host name is blank.



                                      Set the computer name in Control PanelSystem and SecuritySystem, and all will be well.






                                      share|improve this answer










                                      New contributor




                                      Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                      Check out our Code of Conduct.









                                      The answer is in the first section of the ipconfig.



                                      Windows IP Configuration

                                      Host Name . . . . . . . . . . . . :
                                      Primary Dns Suffix . . . . . . . :
                                      Node Type . . . . . . . . . . . . : Hybrid
                                      IP Routing Enabled. . . . . . . . : No
                                      WINS Proxy Enabled. . . . . . . . : No


                                      Host name is blank.



                                      Set the computer name in Control PanelSystem and SecuritySystem, and all will be well.







                                      share|improve this answer










                                      New contributor




                                      Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                      Check out our Code of Conduct.









                                      share|improve this answer



                                      share|improve this answer








                                      edited Dec 25 at 6:16









                                      Mureinik

                                      2,33751525




                                      2,33751525






                                      New contributor




                                      Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                      Check out our Code of Conduct.









                                      answered Dec 25 at 5:33









                                      Mike Shurkin

                                      1




                                      1




                                      New contributor




                                      Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                      Check out our Code of Conduct.





                                      New contributor





                                      Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                      Check out our Code of Conduct.






                                      Mike Shurkin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                                      Check out our Code of Conduct.






























                                          draft saved

                                          draft discarded




















































                                          Thanks for contributing an answer to Super User!


                                          • Please be sure to answer the question. Provide details and share your research!

                                          But avoid



                                          • Asking for help, clarification, or responding to other answers.

                                          • Making statements based on opinion; back them up with references or personal experience.


                                          To learn more, see our tips on writing great answers.





                                          Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


                                          Please pay close attention to the following guidance:


                                          • Please be sure to answer the question. Provide details and share your research!

                                          But avoid



                                          • Asking for help, clarification, or responding to other answers.

                                          • Making statements based on opinion; back them up with references or personal experience.


                                          To learn more, see our tips on writing great answers.




                                          draft saved


                                          draft discarded














                                          StackExchange.ready(
                                          function () {
                                          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1019467%2fwindows-10-cant-resolve-hostnames-ping-with-ip-works-but-not-with-hostname%23new-answer', 'question_page');
                                          }
                                          );

                                          Post as a guest















                                          Required, but never shown





















































                                          Required, but never shown














                                          Required, but never shown












                                          Required, but never shown







                                          Required, but never shown

































                                          Required, but never shown














                                          Required, but never shown












                                          Required, but never shown







                                          Required, but never shown







                                          Popular posts from this blog

                                          "Incorrect syntax near the keyword 'ON'. (on update cascade, on delete cascade,)

                                          Alcedinidae

                                          Origin of the phrase “under your belt”?