Connecting a USB 3.0 connector to USB 3.1 Gen 2 front panel connector
My Asus ROG Strix x470F has a USB 3.1 Gen 2 front panel connector. My multicard reader has only a USB 3.0 (internal) connector.
I found this product: “CY USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable for ASUS Motherboard 20cm”
This would be exactly what i need, but the reviews don’t look promising for my needs.
I couldn't find any alternatives. I have been looking for USB 3.1 Gen 1 to SATA but no luck there.
What would you do to connect the multi-card reader to the motherboard?
Edit to answer questions:
The Manual states on page 1-12. that there is one USB 3.1 Gen 2 connector and one USB 3.1 Gen 1 Connector. What i forgot to mention is, that my case already uses the mainboards USB 3.1 Gen 1 Connector. My card reader has an usb 3.1 Gen 1 connector as well. Therefore i have 2 USB 3.1 Gen 1 Cables which somehow have to fit into 1 USB 3.1 Gen 1 socket and 1 USB 3.1 Gen 2 Socket. I thought of sata because i have some sata connectors left on my mainbard.
usb motherboard sata
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
add a comment |
My Asus ROG Strix x470F has a USB 3.1 Gen 2 front panel connector. My multicard reader has only a USB 3.0 (internal) connector.
I found this product: “CY USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable for ASUS Motherboard 20cm”
This would be exactly what i need, but the reviews don’t look promising for my needs.
I couldn't find any alternatives. I have been looking for USB 3.1 Gen 1 to SATA but no luck there.
What would you do to connect the multi-card reader to the motherboard?
Edit to answer questions:
The Manual states on page 1-12. that there is one USB 3.1 Gen 2 connector and one USB 3.1 Gen 1 Connector. What i forgot to mention is, that my case already uses the mainboards USB 3.1 Gen 1 Connector. My card reader has an usb 3.1 Gen 1 connector as well. Therefore i have 2 USB 3.1 Gen 1 Cables which somehow have to fit into 1 USB 3.1 Gen 1 socket and 1 USB 3.1 Gen 2 Socket. I thought of sata because i have some sata connectors left on my mainbard.
usb motherboard sata
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
1
USB 3.0is also known asUSB 3.1 Gen 1. Why would converting USB to SATA be helpful? What problem are you trying to solve?
– Ramhound
Dec 16 '18 at 16:55
I'm confused, when I look at this motherbaords user guide, it shows the 20-pin header you need on the board for your multicard reader to connect to an no internal "3.1" ports that would be appropriate for that cable.
– acejavelin
Dec 16 '18 at 17:00
1
i modified my first post to answer your questions
– JuliusCaesar
Dec 16 '18 at 17:55
That is the type of cable you need then... we do not give shipping advice.
– acejavelin
Dec 16 '18 at 19:26
1
"My multicard reader has only a USB 3.0 (internal) connector." - What is "your multicard reader"? What kind of "internal" connector does it have?
– Ale..chenski
Dec 17 '18 at 18:48
add a comment |
My Asus ROG Strix x470F has a USB 3.1 Gen 2 front panel connector. My multicard reader has only a USB 3.0 (internal) connector.
I found this product: “CY USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable for ASUS Motherboard 20cm”
This would be exactly what i need, but the reviews don’t look promising for my needs.
I couldn't find any alternatives. I have been looking for USB 3.1 Gen 1 to SATA but no luck there.
What would you do to connect the multi-card reader to the motherboard?
Edit to answer questions:
The Manual states on page 1-12. that there is one USB 3.1 Gen 2 connector and one USB 3.1 Gen 1 Connector. What i forgot to mention is, that my case already uses the mainboards USB 3.1 Gen 1 Connector. My card reader has an usb 3.1 Gen 1 connector as well. Therefore i have 2 USB 3.1 Gen 1 Cables which somehow have to fit into 1 USB 3.1 Gen 1 socket and 1 USB 3.1 Gen 2 Socket. I thought of sata because i have some sata connectors left on my mainbard.
usb motherboard sata
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
My Asus ROG Strix x470F has a USB 3.1 Gen 2 front panel connector. My multicard reader has only a USB 3.0 (internal) connector.
I found this product: “CY USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable for ASUS Motherboard 20cm”
This would be exactly what i need, but the reviews don’t look promising for my needs.
I couldn't find any alternatives. I have been looking for USB 3.1 Gen 1 to SATA but no luck there.
What would you do to connect the multi-card reader to the motherboard?
Edit to answer questions:
The Manual states on page 1-12. that there is one USB 3.1 Gen 2 connector and one USB 3.1 Gen 1 Connector. What i forgot to mention is, that my case already uses the mainboards USB 3.1 Gen 1 Connector. My card reader has an usb 3.1 Gen 1 connector as well. Therefore i have 2 USB 3.1 Gen 1 Cables which somehow have to fit into 1 USB 3.1 Gen 1 socket and 1 USB 3.1 Gen 2 Socket. I thought of sata because i have some sata connectors left on my mainbard.
usb motherboard sata
usb motherboard sata
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
edited Dec 17 '18 at 21:52
Keltari
50.9k18118170
50.9k18118170
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
asked Dec 16 '18 at 16:31
JuliusCaesarJuliusCaesar
32
32
1
USB 3.0is also known asUSB 3.1 Gen 1. Why would converting USB to SATA be helpful? What problem are you trying to solve?
– Ramhound
Dec 16 '18 at 16:55
I'm confused, when I look at this motherbaords user guide, it shows the 20-pin header you need on the board for your multicard reader to connect to an no internal "3.1" ports that would be appropriate for that cable.
– acejavelin
Dec 16 '18 at 17:00
1
i modified my first post to answer your questions
– JuliusCaesar
Dec 16 '18 at 17:55
That is the type of cable you need then... we do not give shipping advice.
– acejavelin
Dec 16 '18 at 19:26
1
"My multicard reader has only a USB 3.0 (internal) connector." - What is "your multicard reader"? What kind of "internal" connector does it have?
– Ale..chenski
Dec 17 '18 at 18:48
add a comment |
1
USB 3.0is also known asUSB 3.1 Gen 1. Why would converting USB to SATA be helpful? What problem are you trying to solve?
– Ramhound
Dec 16 '18 at 16:55
I'm confused, when I look at this motherbaords user guide, it shows the 20-pin header you need on the board for your multicard reader to connect to an no internal "3.1" ports that would be appropriate for that cable.
– acejavelin
Dec 16 '18 at 17:00
1
i modified my first post to answer your questions
– JuliusCaesar
Dec 16 '18 at 17:55
That is the type of cable you need then... we do not give shipping advice.
– acejavelin
Dec 16 '18 at 19:26
1
"My multicard reader has only a USB 3.0 (internal) connector." - What is "your multicard reader"? What kind of "internal" connector does it have?
– Ale..chenski
Dec 17 '18 at 18:48
1
1
USB 3.0 is also known as USB 3.1 Gen 1. Why would converting USB to SATA be helpful? What problem are you trying to solve?– Ramhound
Dec 16 '18 at 16:55
USB 3.0 is also known as USB 3.1 Gen 1. Why would converting USB to SATA be helpful? What problem are you trying to solve?– Ramhound
Dec 16 '18 at 16:55
I'm confused, when I look at this motherbaords user guide, it shows the 20-pin header you need on the board for your multicard reader to connect to an no internal "3.1" ports that would be appropriate for that cable.
– acejavelin
Dec 16 '18 at 17:00
I'm confused, when I look at this motherbaords user guide, it shows the 20-pin header you need on the board for your multicard reader to connect to an no internal "3.1" ports that would be appropriate for that cable.
– acejavelin
Dec 16 '18 at 17:00
1
1
i modified my first post to answer your questions
– JuliusCaesar
Dec 16 '18 at 17:55
i modified my first post to answer your questions
– JuliusCaesar
Dec 16 '18 at 17:55
That is the type of cable you need then... we do not give shipping advice.
– acejavelin
Dec 16 '18 at 19:26
That is the type of cable you need then... we do not give shipping advice.
– acejavelin
Dec 16 '18 at 19:26
1
1
"My multicard reader has only a USB 3.0 (internal) connector." - What is "your multicard reader"? What kind of "internal" connector does it have?
– Ale..chenski
Dec 17 '18 at 18:48
"My multicard reader has only a USB 3.0 (internal) connector." - What is "your multicard reader"? What kind of "internal" connector does it have?
– Ale..chenski
Dec 17 '18 at 18:48
add a comment |
1 Answer
1
active
oldest
votes
This is the new internal system connector introduced about a year ago, and the connectors started to appear on the market since early 2017.
Here is the suggested use:
If your "multicard reader" does have the older 20-pin (2mm pitch blue) internal connector that mates to the cable shown in your question, this is the only way (and the right way) to use the new "U31G2_C1" on-board connector, regardless of "non-promising reviews".
It has to be noted that the USB 3.1 (both Gen1 and especially Gen2), is fairly sensitive to quality of cables and especially to how wires are assembled inside overmolds, so it is possible that early (non-certified) implementations of cables might have signal integrity issues and don't work to user's expectations. So you either search for USB-IF certified cable-adapter, or try to push some luck buying different cables from different manufacturers.
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
Thank you for your detailed info. I'll search for USB-IF certified cable-adapter. If i do not find any i'll have to wait. The other ports are still working.
– JuliusCaesar
Dec 19 '18 at 0:16
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1385037%2fconnecting-a-usb-3-0-connector-to-usb-3-1-gen-2-front-panel-connector%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
This is the new internal system connector introduced about a year ago, and the connectors started to appear on the market since early 2017.
Here is the suggested use:
If your "multicard reader" does have the older 20-pin (2mm pitch blue) internal connector that mates to the cable shown in your question, this is the only way (and the right way) to use the new "U31G2_C1" on-board connector, regardless of "non-promising reviews".
It has to be noted that the USB 3.1 (both Gen1 and especially Gen2), is fairly sensitive to quality of cables and especially to how wires are assembled inside overmolds, so it is possible that early (non-certified) implementations of cables might have signal integrity issues and don't work to user's expectations. So you either search for USB-IF certified cable-adapter, or try to push some luck buying different cables from different manufacturers.
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
Thank you for your detailed info. I'll search for USB-IF certified cable-adapter. If i do not find any i'll have to wait. The other ports are still working.
– JuliusCaesar
Dec 19 '18 at 0:16
add a comment |
This is the new internal system connector introduced about a year ago, and the connectors started to appear on the market since early 2017.
Here is the suggested use:
If your "multicard reader" does have the older 20-pin (2mm pitch blue) internal connector that mates to the cable shown in your question, this is the only way (and the right way) to use the new "U31G2_C1" on-board connector, regardless of "non-promising reviews".
It has to be noted that the USB 3.1 (both Gen1 and especially Gen2), is fairly sensitive to quality of cables and especially to how wires are assembled inside overmolds, so it is possible that early (non-certified) implementations of cables might have signal integrity issues and don't work to user's expectations. So you either search for USB-IF certified cable-adapter, or try to push some luck buying different cables from different manufacturers.
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
Thank you for your detailed info. I'll search for USB-IF certified cable-adapter. If i do not find any i'll have to wait. The other ports are still working.
– JuliusCaesar
Dec 19 '18 at 0:16
add a comment |
This is the new internal system connector introduced about a year ago, and the connectors started to appear on the market since early 2017.
Here is the suggested use:
If your "multicard reader" does have the older 20-pin (2mm pitch blue) internal connector that mates to the cable shown in your question, this is the only way (and the right way) to use the new "U31G2_C1" on-board connector, regardless of "non-promising reviews".
It has to be noted that the USB 3.1 (both Gen1 and especially Gen2), is fairly sensitive to quality of cables and especially to how wires are assembled inside overmolds, so it is possible that early (non-certified) implementations of cables might have signal integrity issues and don't work to user's expectations. So you either search for USB-IF certified cable-adapter, or try to push some luck buying different cables from different manufacturers.
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
This is the new internal system connector introduced about a year ago, and the connectors started to appear on the market since early 2017.
Here is the suggested use:
If your "multicard reader" does have the older 20-pin (2mm pitch blue) internal connector that mates to the cable shown in your question, this is the only way (and the right way) to use the new "U31G2_C1" on-board connector, regardless of "non-promising reviews".
It has to be noted that the USB 3.1 (both Gen1 and especially Gen2), is fairly sensitive to quality of cables and especially to how wires are assembled inside overmolds, so it is possible that early (non-certified) implementations of cables might have signal integrity issues and don't work to user's expectations. So you either search for USB-IF certified cable-adapter, or try to push some luck buying different cables from different manufacturers.
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
edited Dec 17 '18 at 19:39
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
answered Dec 17 '18 at 19:29
Ale..chenskiAle..chenski
8,49841731
8,49841731
Thank you for your detailed info. I'll search for USB-IF certified cable-adapter. If i do not find any i'll have to wait. The other ports are still working.
– JuliusCaesar
Dec 19 '18 at 0:16
add a comment |
Thank you for your detailed info. I'll search for USB-IF certified cable-adapter. If i do not find any i'll have to wait. The other ports are still working.
– JuliusCaesar
Dec 19 '18 at 0:16
Thank you for your detailed info. I'll search for USB-IF certified cable-adapter. If i do not find any i'll have to wait. The other ports are still working.
– JuliusCaesar
Dec 19 '18 at 0:16
Thank you for your detailed info. I'll search for USB-IF certified cable-adapter. If i do not find any i'll have to wait. The other ports are still working.
– JuliusCaesar
Dec 19 '18 at 0:16
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1385037%2fconnecting-a-usb-3-0-connector-to-usb-3-1-gen-2-front-panel-connector%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
USB 3.0is also known asUSB 3.1 Gen 1. Why would converting USB to SATA be helpful? What problem are you trying to solve?– Ramhound
Dec 16 '18 at 16:55
I'm confused, when I look at this motherbaords user guide, it shows the 20-pin header you need on the board for your multicard reader to connect to an no internal "3.1" ports that would be appropriate for that cable.
– acejavelin
Dec 16 '18 at 17:00
1
i modified my first post to answer your questions
– JuliusCaesar
Dec 16 '18 at 17:55
That is the type of cable you need then... we do not give shipping advice.
– acejavelin
Dec 16 '18 at 19:26
1
"My multicard reader has only a USB 3.0 (internal) connector." - What is "your multicard reader"? What kind of "internal" connector does it have?
– Ale..chenski
Dec 17 '18 at 18:48