Replacement ford fiesta radiator has extra hose
I own a ford fiesta mk6 car. I recently bought a replacement radiator. Unfortunately I think its for an older model or different variant (ST150?)
Is it possible to use the new radiator in my old setup if I remove and block the pipe marked in lime green in Figure 2. I'm not quite sure what it does.
For clarity the radiator setup that I have is Figure 1 the new radiator with an extra hose is Figure 2.
Thank you for your time
Figure 1:
Figure 2:
ford radiator fiesta radiator-overflow
asked 11 hours ago
JammerJammer
1383
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I own a ford fiesta mk6 car. I recently bought a replacement radiator. Unfortunately I think its for an older model or different variant (ST150?)
Is it possible to use the new radiator in my old setup if I remove and block the pipe marked in lime green in Figure 2. I'm not quite sure what it does.
For clarity the radiator setup that I have is Figure 1 the new radiator with an extra hose is Figure 2.
Thank you for your time
Figure 1:
Figure 2:
ford radiator fiesta radiator-overflow
asked 11 hours ago
JammerJammer
1383
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Welcome to Motor Vehicle Maintenance & Repair! I'm not sure, because the recovery tank is different as well (three vs two outlets). I mean, the whole system looks completely different in how its routed. The new radiator (in Fig 2) has four outlets on it, versus the two in Fig 1 as well ... If I were you, I'd look to get the correct radiator.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
Hi Paulster2, thanks for messaging. The new radiator has the same hose configuration as the old one with the additional small outlet (marked green). I'm not sure what the extra little outlet is or does to be honest. Does it prevent air bubbles at the top of the radiator? Add a small amount of cold water to the hot end of the radiator? Cheers
– Jammer
10 hours ago
That looks to be an addition ie factory change design to help reduce bleeding problems. Either get the other tank or change the rad... But would the other tank fit since the pipes change position?
– Solar Mike
10 hours ago
What is the model year and the nation of sale?
– Harper
5 hours ago
add a comment |
I own a ford fiesta mk6 car. I recently bought a replacement radiator. Unfortunately I think its for an older model or different variant (ST150?)
Is it possible to use the new radiator in my old setup if I remove and block the pipe marked in lime green in Figure 2. I'm not quite sure what it does.
For clarity the radiator setup that I have is Figure 1 the new radiator with an extra hose is Figure 2.
Thank you for your time
Figure 1:
Figure 2:
ford radiator fiesta radiator-overflow
asked 11 hours ago
JammerJammer
1383
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I own a ford fiesta mk6 car. I recently bought a replacement radiator. Unfortunately I think its for an older model or different variant (ST150?)
Is it possible to use the new radiator in my old setup if I remove and block the pipe marked in lime green in Figure 2. I'm not quite sure what it does.
For clarity the radiator setup that I have is Figure 1 the new radiator with an extra hose is Figure 2.
Thank you for your time
Figure 1:
Figure 2:
ford radiator fiesta radiator-overflow
ford radiator fiesta radiator-overflow
asked 11 hours ago
JammerJammer
1383
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 11 hours ago
JammerJammer
1383
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 11 hours ago
JammerJammer
1383
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 11 hours ago
JammerJammer
1383
asked 11 hours ago
JammerJammer
1383
1383
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Jammer is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Welcome to Motor Vehicle Maintenance & Repair! I'm not sure, because the recovery tank is different as well (three vs two outlets). I mean, the whole system looks completely different in how its routed. The new radiator (in Fig 2) has four outlets on it, versus the two in Fig 1 as well ... If I were you, I'd look to get the correct radiator.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
Hi Paulster2, thanks for messaging. The new radiator has the same hose configuration as the old one with the additional small outlet (marked green). I'm not sure what the extra little outlet is or does to be honest. Does it prevent air bubbles at the top of the radiator? Add a small amount of cold water to the hot end of the radiator? Cheers
– Jammer
10 hours ago
That looks to be an addition ie factory change design to help reduce bleeding problems. Either get the other tank or change the rad... But would the other tank fit since the pipes change position?
– Solar Mike
10 hours ago
What is the model year and the nation of sale?
– Harper
5 hours ago
add a comment |
Welcome to Motor Vehicle Maintenance & Repair! I'm not sure, because the recovery tank is different as well (three vs two outlets). I mean, the whole system looks completely different in how its routed. The new radiator (in Fig 2) has four outlets on it, versus the two in Fig 1 as well ... If I were you, I'd look to get the correct radiator.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
Hi Paulster2, thanks for messaging. The new radiator has the same hose configuration as the old one with the additional small outlet (marked green). I'm not sure what the extra little outlet is or does to be honest. Does it prevent air bubbles at the top of the radiator? Add a small amount of cold water to the hot end of the radiator? Cheers
– Jammer
10 hours ago
That looks to be an addition ie factory change design to help reduce bleeding problems. Either get the other tank or change the rad... But would the other tank fit since the pipes change position?
– Solar Mike
10 hours ago
What is the model year and the nation of sale?
– Harper
5 hours ago
Welcome to Motor Vehicle Maintenance & Repair! I'm not sure, because the recovery tank is different as well (three vs two outlets). I mean, the whole system looks completely different in how its routed. The new radiator (in Fig 2) has four outlets on it, versus the two in Fig 1 as well ... If I were you, I'd look to get the correct radiator.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
Welcome to Motor Vehicle Maintenance & Repair! I'm not sure, because the recovery tank is different as well (three vs two outlets). I mean, the whole system looks completely different in how its routed. The new radiator (in Fig 2) has four outlets on it, versus the two in Fig 1 as well ... If I were you, I'd look to get the correct radiator.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
Hi Paulster2, thanks for messaging. The new radiator has the same hose configuration as the old one with the additional small outlet (marked green). I'm not sure what the extra little outlet is or does to be honest. Does it prevent air bubbles at the top of the radiator? Add a small amount of cold water to the hot end of the radiator? Cheers
– Jammer
10 hours ago
Hi Paulster2, thanks for messaging. The new radiator has the same hose configuration as the old one with the additional small outlet (marked green). I'm not sure what the extra little outlet is or does to be honest. Does it prevent air bubbles at the top of the radiator? Add a small amount of cold water to the hot end of the radiator? Cheers
– Jammer
10 hours ago
That looks to be an addition ie factory change design to help reduce bleeding problems. Either get the other tank or change the rad... But would the other tank fit since the pipes change position?
– Solar Mike
10 hours ago
That looks to be an addition ie factory change design to help reduce bleeding problems. Either get the other tank or change the rad... But would the other tank fit since the pipes change position?
– Solar Mike
10 hours ago
What is the model year and the nation of sale?
– Harper
5 hours ago
What is the model year and the nation of sale?
– Harper
5 hours ago
add a comment |
1 Answer
1
active
oldest
votes
What you've been sent is the radiator for the diesel variant - as opposed to what appears to be the 1.25l Zetec petrol engine in your first diagram.
You're correct in that the "main" radiator connections are the same between the two (Despite the confusing placement of the lower hose on the second diagram it is the same hose and hooks up in the same place as on the first one)
The small "extra" connection on it is an overflow pipe back to the expansion tank, in theory if you were to block it off then the radiator might "just work" - however the internals of the radiator are going to be designed on the basis that coolant should be able to flow out of that outlet. So you're going to have to be very, very confident in buttoning that up pretty tight or you'll have Fun with Coolant Leaks!*
Honestly I'd be sending it back and asking them to send you the right one.
*No actual fun included.
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
3
+1 for the ending caveat :o) well, and (IMHO) for the right answer.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
2
Thank you for you answer and for clarifying what the extra connection was. I think I'll take your advice and avoid the fun coolant leaks :)
– Jammer
10 hours ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "224"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Jammer is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f64228%2freplacement-ford-fiesta-radiator-has-extra-hose%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
What you've been sent is the radiator for the diesel variant - as opposed to what appears to be the 1.25l Zetec petrol engine in your first diagram.
You're correct in that the "main" radiator connections are the same between the two (Despite the confusing placement of the lower hose on the second diagram it is the same hose and hooks up in the same place as on the first one)
The small "extra" connection on it is an overflow pipe back to the expansion tank, in theory if you were to block it off then the radiator might "just work" - however the internals of the radiator are going to be designed on the basis that coolant should be able to flow out of that outlet. So you're going to have to be very, very confident in buttoning that up pretty tight or you'll have Fun with Coolant Leaks!*
Honestly I'd be sending it back and asking them to send you the right one.
*No actual fun included.
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
3
+1 for the ending caveat :o) well, and (IMHO) for the right answer.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
2
Thank you for you answer and for clarifying what the extra connection was. I think I'll take your advice and avoid the fun coolant leaks :)
– Jammer
10 hours ago
add a comment |
What you've been sent is the radiator for the diesel variant - as opposed to what appears to be the 1.25l Zetec petrol engine in your first diagram.
You're correct in that the "main" radiator connections are the same between the two (Despite the confusing placement of the lower hose on the second diagram it is the same hose and hooks up in the same place as on the first one)
The small "extra" connection on it is an overflow pipe back to the expansion tank, in theory if you were to block it off then the radiator might "just work" - however the internals of the radiator are going to be designed on the basis that coolant should be able to flow out of that outlet. So you're going to have to be very, very confident in buttoning that up pretty tight or you'll have Fun with Coolant Leaks!*
Honestly I'd be sending it back and asking them to send you the right one.
*No actual fun included.
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
3
+1 for the ending caveat :o) well, and (IMHO) for the right answer.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
2
Thank you for you answer and for clarifying what the extra connection was. I think I'll take your advice and avoid the fun coolant leaks :)
– Jammer
10 hours ago
add a comment |
What you've been sent is the radiator for the diesel variant - as opposed to what appears to be the 1.25l Zetec petrol engine in your first diagram.
You're correct in that the "main" radiator connections are the same between the two (Despite the confusing placement of the lower hose on the second diagram it is the same hose and hooks up in the same place as on the first one)
The small "extra" connection on it is an overflow pipe back to the expansion tank, in theory if you were to block it off then the radiator might "just work" - however the internals of the radiator are going to be designed on the basis that coolant should be able to flow out of that outlet. So you're going to have to be very, very confident in buttoning that up pretty tight or you'll have Fun with Coolant Leaks!*
Honestly I'd be sending it back and asking them to send you the right one.
*No actual fun included.
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
What you've been sent is the radiator for the diesel variant - as opposed to what appears to be the 1.25l Zetec petrol engine in your first diagram.
You're correct in that the "main" radiator connections are the same between the two (Despite the confusing placement of the lower hose on the second diagram it is the same hose and hooks up in the same place as on the first one)
The small "extra" connection on it is an overflow pipe back to the expansion tank, in theory if you were to block it off then the radiator might "just work" - however the internals of the radiator are going to be designed on the basis that coolant should be able to flow out of that outlet. So you're going to have to be very, very confident in buttoning that up pretty tight or you'll have Fun with Coolant Leaks!*
Honestly I'd be sending it back and asking them to send you the right one.
*No actual fun included.
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
answered 10 hours ago
motosubatsumotosubatsu
4,6951928
4,6951928
3
+1 for the ending caveat :o) well, and (IMHO) for the right answer.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
2
Thank you for you answer and for clarifying what the extra connection was. I think I'll take your advice and avoid the fun coolant leaks :)
– Jammer
10 hours ago
add a comment |
3
+1 for the ending caveat :o) well, and (IMHO) for the right answer.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
2
Thank you for you answer and for clarifying what the extra connection was. I think I'll take your advice and avoid the fun coolant leaks :)
– Jammer
10 hours ago
3
3
+1 for the ending caveat :o) well, and (IMHO) for the right answer.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
+1 for the ending caveat :o) well, and (IMHO) for the right answer.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
2
2
Thank you for you answer and for clarifying what the extra connection was. I think I'll take your advice and avoid the fun coolant leaks :)
– Jammer
10 hours ago
Thank you for you answer and for clarifying what the extra connection was. I think I'll take your advice and avoid the fun coolant leaks :)
– Jammer
10 hours ago
add a comment |
Jammer is a new contributor. Be nice, and check out our Code of Conduct.
Jammer is a new contributor. Be nice, and check out our Code of Conduct.
Jammer is a new contributor. Be nice, and check out our Code of Conduct.
Jammer is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Motor Vehicle Maintenance & Repair Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f64228%2freplacement-ford-fiesta-radiator-has-extra-hose%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Welcome to Motor Vehicle Maintenance & Repair! I'm not sure, because the recovery tank is different as well (three vs two outlets). I mean, the whole system looks completely different in how its routed. The new radiator (in Fig 2) has four outlets on it, versus the two in Fig 1 as well ... If I were you, I'd look to get the correct radiator.
– Pᴀᴜʟsᴛᴇʀ2♦
10 hours ago
Hi Paulster2, thanks for messaging. The new radiator has the same hose configuration as the old one with the additional small outlet (marked green). I'm not sure what the extra little outlet is or does to be honest. Does it prevent air bubbles at the top of the radiator? Add a small amount of cold water to the hot end of the radiator? Cheers
– Jammer
10 hours ago
That looks to be an addition ie factory change design to help reduce bleeding problems. Either get the other tank or change the rad... But would the other tank fit since the pipes change position?
– Solar Mike
10 hours ago
What is the model year and the nation of sale?
– Harper
5 hours ago