Stop mouse pointer from sticking to the edge of display in dual monitor setup
up vote
6
down vote
favorite
I am using macOS Mojave on a MacBook Pro.
I don't know if it's just me, but I feel like the mouse pointer, from time to time, seems to stick to the edge of the monitor when I try to move it from secondary monitor to the primary monitor (the secondary monitor is to the right, primary (laptop built in monitor) to the left).
If I try to make it happen on purpose it never happens, which makes me feel like I was mistaken in the beginning, but after playing around for a while I feel like it definitely is happening, but only sometimes and I'm not sure why.
Does this annoying snap-to-monitor-edge feature have a name, and more importantly how do I disable it?
macbook display mouse dual-screen
edited 2 days ago
Nimesh Neema
13k43469
asked 2 days ago
user17915
1314
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
up vote
6
down vote
favorite
I am using macOS Mojave on a MacBook Pro.
I don't know if it's just me, but I feel like the mouse pointer, from time to time, seems to stick to the edge of the monitor when I try to move it from secondary monitor to the primary monitor (the secondary monitor is to the right, primary (laptop built in monitor) to the left).
If I try to make it happen on purpose it never happens, which makes me feel like I was mistaken in the beginning, but after playing around for a while I feel like it definitely is happening, but only sometimes and I'm not sure why.
Does this annoying snap-to-monitor-edge feature have a name, and more importantly how do I disable it?
macbook display mouse dual-screen
edited 2 days ago
Nimesh Neema
13k43469
asked 2 days ago
user17915
1314
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Welcome new user. Fortunately, you simply have them aligned wrong, that's all it is.
– Fattie
2 days ago
add a comment |
up vote
6
down vote
favorite
up vote
6
down vote
favorite
I am using macOS Mojave on a MacBook Pro.
I don't know if it's just me, but I feel like the mouse pointer, from time to time, seems to stick to the edge of the monitor when I try to move it from secondary monitor to the primary monitor (the secondary monitor is to the right, primary (laptop built in monitor) to the left).
If I try to make it happen on purpose it never happens, which makes me feel like I was mistaken in the beginning, but after playing around for a while I feel like it definitely is happening, but only sometimes and I'm not sure why.
Does this annoying snap-to-monitor-edge feature have a name, and more importantly how do I disable it?
macbook display mouse dual-screen
edited 2 days ago
Nimesh Neema
13k43469
asked 2 days ago
user17915
1314
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I am using macOS Mojave on a MacBook Pro.
I don't know if it's just me, but I feel like the mouse pointer, from time to time, seems to stick to the edge of the monitor when I try to move it from secondary monitor to the primary monitor (the secondary monitor is to the right, primary (laptop built in monitor) to the left).
If I try to make it happen on purpose it never happens, which makes me feel like I was mistaken in the beginning, but after playing around for a while I feel like it definitely is happening, but only sometimes and I'm not sure why.
Does this annoying snap-to-monitor-edge feature have a name, and more importantly how do I disable it?
macbook display mouse dual-screen
macbook display mouse dual-screen
edited 2 days ago
Nimesh Neema
13k43469
asked 2 days ago
user17915
1314
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 2 days ago
Nimesh Neema
13k43469
asked 2 days ago
user17915
1314
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 2 days ago
Nimesh Neema
13k43469
edited 2 days ago
Nimesh Neema
13k43469
edited 2 days ago
Nimesh Neema
13k43469
13k43469
asked 2 days ago
user17915
1314
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 days ago
user17915
1314
asked 2 days ago
user17915
1314
1314
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
user17915 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Welcome new user. Fortunately, you simply have them aligned wrong, that's all it is.
– Fattie
2 days ago
add a comment |
Welcome new user. Fortunately, you simply have them aligned wrong, that's all it is.
– Fattie
2 days ago
Welcome new user. Fortunately, you simply have them aligned wrong, that's all it is.
– Fattie
2 days ago
Welcome new user. Fortunately, you simply have them aligned wrong, that's all it is.
– Fattie
2 days ago
add a comment |
1 Answer
1
active
oldest
votes
up vote
14
down vote
There is no snap-to-monitor-edge feature or anything similar built-in into macOS Mojave (or any earlier release of macOS). You are using an external monitor with extended display mode. As described, your setup is something like this:
The display on the left is your built-in display, while the one on your right is the external, extended display.
Now, notice the horizontal alignment of the displays. When moving the mouse from external to built-in display, if you are moving the mouse along the bottom edge, the pointer will have no path to move into the built-in display shown on left, as it hits the edge of the external display.
If you move the mouse pointer vertically to appropriate height, the mouse pointer will find a way to move into built-in display as soon as it reaches the corner of the built-in display. You can try this by dragging the mouse pointer along the edge of external display vertically, while attempting to move the mouse pointer towards left.
If you find this behaviour interfering with your workflow, you can easily adjust the relative placement of the displays by dragging them. There are a number of variations you can try as long as the two rectangles are not totally isolated (as separate islands). Even an alignment where just the angles of the two displays is touching is possible too :)
Refer to the Apple Support document, Use external monitors with your Mac for more details.
answered 2 days ago
Nimesh Neema
13k43469
I see, this is indeed happening if I try to move the pointer through the lower part of the external (right) monitor. Thank you very much
– user17915
2 days ago
1
Is there any way to make the mouse pointer come out of the corresponding location of the edge of the built-in monitor when I move it from secondary to the primary monitor? (For instance, if I move the pointer from secondary to primary at 2/3rd the height of the secondary, it should come out at 2/3rd the height of the primary). I think that's how it happens on Windows. Is there a way to do this on mac?
– user17915
2 days ago
@user17915 Not using any built-in mechanism. I'm not aware of any 3rd party app that lets you do so.
– Nimesh Neema
2 days ago
1
@user17915 Your computer doesn't know anything about the physical size of the monitors—it only knows about resolution.
– Kris Harper
2 days ago
1
@user17915 It happens correctly on windows, since the default screen size of your windows laptop was the same as your external screen, but the mac book you are using has a retina screen that has a smaller total numbers of pixels than your external screen, this issue is also on Windows if you use a 4k screen in combination with an full HD external screen
– Ferrybig
2 days ago
|
show 2 more comments
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
14
down vote
There is no snap-to-monitor-edge feature or anything similar built-in into macOS Mojave (or any earlier release of macOS). You are using an external monitor with extended display mode. As described, your setup is something like this:
The display on the left is your built-in display, while the one on your right is the external, extended display.
Now, notice the horizontal alignment of the displays. When moving the mouse from external to built-in display, if you are moving the mouse along the bottom edge, the pointer will have no path to move into the built-in display shown on left, as it hits the edge of the external display.
If you move the mouse pointer vertically to appropriate height, the mouse pointer will find a way to move into built-in display as soon as it reaches the corner of the built-in display. You can try this by dragging the mouse pointer along the edge of external display vertically, while attempting to move the mouse pointer towards left.
If you find this behaviour interfering with your workflow, you can easily adjust the relative placement of the displays by dragging them. There are a number of variations you can try as long as the two rectangles are not totally isolated (as separate islands). Even an alignment where just the angles of the two displays is touching is possible too :)
Refer to the Apple Support document, Use external monitors with your Mac for more details.
answered 2 days ago
Nimesh Neema
13k43469
I see, this is indeed happening if I try to move the pointer through the lower part of the external (right) monitor. Thank you very much
– user17915
2 days ago
1
Is there any way to make the mouse pointer come out of the corresponding location of the edge of the built-in monitor when I move it from secondary to the primary monitor? (For instance, if I move the pointer from secondary to primary at 2/3rd the height of the secondary, it should come out at 2/3rd the height of the primary). I think that's how it happens on Windows. Is there a way to do this on mac?
– user17915
2 days ago
@user17915 Not using any built-in mechanism. I'm not aware of any 3rd party app that lets you do so.
– Nimesh Neema
2 days ago
1
@user17915 Your computer doesn't know anything about the physical size of the monitors—it only knows about resolution.
– Kris Harper
2 days ago
1
@user17915 It happens correctly on windows, since the default screen size of your windows laptop was the same as your external screen, but the mac book you are using has a retina screen that has a smaller total numbers of pixels than your external screen, this issue is also on Windows if you use a 4k screen in combination with an full HD external screen
– Ferrybig
2 days ago
|
show 2 more comments
up vote
14
down vote
There is no snap-to-monitor-edge feature or anything similar built-in into macOS Mojave (or any earlier release of macOS). You are using an external monitor with extended display mode. As described, your setup is something like this:
The display on the left is your built-in display, while the one on your right is the external, extended display.
Now, notice the horizontal alignment of the displays. When moving the mouse from external to built-in display, if you are moving the mouse along the bottom edge, the pointer will have no path to move into the built-in display shown on left, as it hits the edge of the external display.
If you move the mouse pointer vertically to appropriate height, the mouse pointer will find a way to move into built-in display as soon as it reaches the corner of the built-in display. You can try this by dragging the mouse pointer along the edge of external display vertically, while attempting to move the mouse pointer towards left.
If you find this behaviour interfering with your workflow, you can easily adjust the relative placement of the displays by dragging them. There are a number of variations you can try as long as the two rectangles are not totally isolated (as separate islands). Even an alignment where just the angles of the two displays is touching is possible too :)
Refer to the Apple Support document, Use external monitors with your Mac for more details.
answered 2 days ago
Nimesh Neema
13k43469
I see, this is indeed happening if I try to move the pointer through the lower part of the external (right) monitor. Thank you very much
– user17915
2 days ago
1
Is there any way to make the mouse pointer come out of the corresponding location of the edge of the built-in monitor when I move it from secondary to the primary monitor? (For instance, if I move the pointer from secondary to primary at 2/3rd the height of the secondary, it should come out at 2/3rd the height of the primary). I think that's how it happens on Windows. Is there a way to do this on mac?
– user17915
2 days ago
@user17915 Not using any built-in mechanism. I'm not aware of any 3rd party app that lets you do so.
– Nimesh Neema
2 days ago
1
@user17915 Your computer doesn't know anything about the physical size of the monitors—it only knows about resolution.
– Kris Harper
2 days ago
1
@user17915 It happens correctly on windows, since the default screen size of your windows laptop was the same as your external screen, but the mac book you are using has a retina screen that has a smaller total numbers of pixels than your external screen, this issue is also on Windows if you use a 4k screen in combination with an full HD external screen
– Ferrybig
2 days ago
|
show 2 more comments
up vote
14
down vote
up vote
14
down vote
There is no snap-to-monitor-edge feature or anything similar built-in into macOS Mojave (or any earlier release of macOS). You are using an external monitor with extended display mode. As described, your setup is something like this:
The display on the left is your built-in display, while the one on your right is the external, extended display.
Now, notice the horizontal alignment of the displays. When moving the mouse from external to built-in display, if you are moving the mouse along the bottom edge, the pointer will have no path to move into the built-in display shown on left, as it hits the edge of the external display.
If you move the mouse pointer vertically to appropriate height, the mouse pointer will find a way to move into built-in display as soon as it reaches the corner of the built-in display. You can try this by dragging the mouse pointer along the edge of external display vertically, while attempting to move the mouse pointer towards left.
If you find this behaviour interfering with your workflow, you can easily adjust the relative placement of the displays by dragging them. There are a number of variations you can try as long as the two rectangles are not totally isolated (as separate islands). Even an alignment where just the angles of the two displays is touching is possible too :)
Refer to the Apple Support document, Use external monitors with your Mac for more details.
answered 2 days ago
Nimesh Neema
13k43469
There is no snap-to-monitor-edge feature or anything similar built-in into macOS Mojave (or any earlier release of macOS). You are using an external monitor with extended display mode. As described, your setup is something like this:
The display on the left is your built-in display, while the one on your right is the external, extended display.
Now, notice the horizontal alignment of the displays. When moving the mouse from external to built-in display, if you are moving the mouse along the bottom edge, the pointer will have no path to move into the built-in display shown on left, as it hits the edge of the external display.
If you move the mouse pointer vertically to appropriate height, the mouse pointer will find a way to move into built-in display as soon as it reaches the corner of the built-in display. You can try this by dragging the mouse pointer along the edge of external display vertically, while attempting to move the mouse pointer towards left.
If you find this behaviour interfering with your workflow, you can easily adjust the relative placement of the displays by dragging them. There are a number of variations you can try as long as the two rectangles are not totally isolated (as separate islands). Even an alignment where just the angles of the two displays is touching is possible too :)
Refer to the Apple Support document, Use external monitors with your Mac for more details.
answered 2 days ago
Nimesh Neema
13k43469
edited 2 days ago
answered 2 days ago
Nimesh Neema
13k43469
answered 2 days ago
Nimesh Neema
13k43469
answered 2 days ago
Nimesh Neema
13k43469
13k43469
I see, this is indeed happening if I try to move the pointer through the lower part of the external (right) monitor. Thank you very much
– user17915
2 days ago
1
Is there any way to make the mouse pointer come out of the corresponding location of the edge of the built-in monitor when I move it from secondary to the primary monitor? (For instance, if I move the pointer from secondary to primary at 2/3rd the height of the secondary, it should come out at 2/3rd the height of the primary). I think that's how it happens on Windows. Is there a way to do this on mac?
– user17915
2 days ago
@user17915 Not using any built-in mechanism. I'm not aware of any 3rd party app that lets you do so.
– Nimesh Neema
2 days ago
1
@user17915 Your computer doesn't know anything about the physical size of the monitors—it only knows about resolution.
– Kris Harper
2 days ago
1
@user17915 It happens correctly on windows, since the default screen size of your windows laptop was the same as your external screen, but the mac book you are using has a retina screen that has a smaller total numbers of pixels than your external screen, this issue is also on Windows if you use a 4k screen in combination with an full HD external screen
– Ferrybig
2 days ago
|
show 2 more comments
I see, this is indeed happening if I try to move the pointer through the lower part of the external (right) monitor. Thank you very much
– user17915
2 days ago
1
Is there any way to make the mouse pointer come out of the corresponding location of the edge of the built-in monitor when I move it from secondary to the primary monitor? (For instance, if I move the pointer from secondary to primary at 2/3rd the height of the secondary, it should come out at 2/3rd the height of the primary). I think that's how it happens on Windows. Is there a way to do this on mac?
– user17915
2 days ago
@user17915 Not using any built-in mechanism. I'm not aware of any 3rd party app that lets you do so.
– Nimesh Neema
2 days ago
1
@user17915 Your computer doesn't know anything about the physical size of the monitors—it only knows about resolution.
– Kris Harper
2 days ago
1
@user17915 It happens correctly on windows, since the default screen size of your windows laptop was the same as your external screen, but the mac book you are using has a retina screen that has a smaller total numbers of pixels than your external screen, this issue is also on Windows if you use a 4k screen in combination with an full HD external screen
– Ferrybig
2 days ago
I see, this is indeed happening if I try to move the pointer through the lower part of the external (right) monitor. Thank you very much
– user17915
2 days ago
I see, this is indeed happening if I try to move the pointer through the lower part of the external (right) monitor. Thank you very much
– user17915
2 days ago
1
1
Is there any way to make the mouse pointer come out of the corresponding location of the edge of the built-in monitor when I move it from secondary to the primary monitor? (For instance, if I move the pointer from secondary to primary at 2/3rd the height of the secondary, it should come out at 2/3rd the height of the primary). I think that's how it happens on Windows. Is there a way to do this on mac?
– user17915
2 days ago
Is there any way to make the mouse pointer come out of the corresponding location of the edge of the built-in monitor when I move it from secondary to the primary monitor? (For instance, if I move the pointer from secondary to primary at 2/3rd the height of the secondary, it should come out at 2/3rd the height of the primary). I think that's how it happens on Windows. Is there a way to do this on mac?
– user17915
2 days ago
@user17915 Not using any built-in mechanism. I'm not aware of any 3rd party app that lets you do so.
– Nimesh Neema
2 days ago
@user17915 Not using any built-in mechanism. I'm not aware of any 3rd party app that lets you do so.
– Nimesh Neema
2 days ago
1
1
@user17915 Your computer doesn't know anything about the physical size of the monitors—it only knows about resolution.
– Kris Harper
2 days ago
@user17915 Your computer doesn't know anything about the physical size of the monitors—it only knows about resolution.
– Kris Harper
2 days ago
1
1
@user17915 It happens correctly on windows, since the default screen size of your windows laptop was the same as your external screen, but the mac book you are using has a retina screen that has a smaller total numbers of pixels than your external screen, this issue is also on Windows if you use a 4k screen in combination with an full HD external screen
– Ferrybig
2 days ago
@user17915 It happens correctly on windows, since the default screen size of your windows laptop was the same as your external screen, but the mac book you are using has a retina screen that has a smaller total numbers of pixels than your external screen, this issue is also on Windows if you use a 4k screen in combination with an full HD external screen
– Ferrybig
2 days ago
|
show 2 more comments
user17915 is a new contributor. Be nice, and check out our Code of Conduct.
user17915 is a new contributor. Be nice, and check out our Code of Conduct.
user17915 is a new contributor. Be nice, and check out our Code of Conduct.
user17915 is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fapple.stackexchange.com%2fquestions%2f343830%2fstop-mouse-pointer-from-sticking-to-the-edge-of-display-in-dual-monitor-setup%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Welcome new user. Fortunately, you simply have them aligned wrong, that's all it is.
– Fattie
2 days ago