Banged frame: Is it still safe to use?
My girlfriend's bicycle was vandalized by a neighbour. It seems like they banged it with a hammer or something right in the middle of the frame. Is this still safe to use?
frames safety
asked 2 days ago
JonorlJonorl
4612
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
|
show 8 more comments
My girlfriend's bicycle was vandalized by a neighbour. It seems like they banged it with a hammer or something right in the middle of the frame. Is this still safe to use?
frames safety
asked 2 days ago
JonorlJonorl
4612
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
10
That looks like a thin-walled aluminum frame. Try this: sit down in a chair. Take an empty aluminum soda can and put it upright on the floor in front of you. Take one of your feet, place it on top of the can and slowly put a decent amount of weight on the can - not enough to crush it, but a good amount of weight. Now carefully lean over, and without removing any of the pressure from your foot on the can, tap the side of the can with your finger. That can will collapse almost immediately if you do it right. Tubes get a lot of their strength from the uniform shape - dents ruin that.
– Andrew Henle
2 days ago
3
I thought Condor Fratello(s) were steel so edit the question with frame material - most answers are assuming aluminium at this point. I expect the answer will still be to not ride the bike but you might get input on how to get it fixed well. It’s certainly a quality frame worth considering fixing (and getting neighbour to foot the bill).
– Swifty
2 days ago
3
If it's steel it's probably safe to ride in the short term, but the bend is extreme enough that it will tend to fatigue and crack over the long term (ie, after hundreds if not thousands of miles). If it does crack the failure is not apt to be catastrophic -- the crack will visible before the frame fails completely. Aluminum, on the other hand, is apt to fail catastrophically after only a few hours use.
– Daniel R Hicks
2 days ago
3
That doesn't look like it's been hit by a hammer, to me. Looks much more like a vehicle has been driven into it or something like that. You'd need to swing hard with a very heavy hammer to do that sort of damage. You'd also have to hit it just right as an off-centre blow would likely be deflected by the curve of the tube. It doesn't look like there have been multiple strikes and I think somebody would have to be pretty lucky to make that hit as a first attempt.
– David Richerby
yesterday
3
@DavidRicherby I agree with your assessment and based on it, I'd say it looks more like an accident than vandalism (of course you can drive a vehicle into it on purpose, but I'd think it's unlikely they did so and then decided to stop after this relatively minor damage). While the distinction doesn't really help, it does fit nicely with Hanlon's Razor: "Never attribute to malice that which is adequately explained by stupidity."
– Jasper
yesterday
|
show 8 more comments
My girlfriend's bicycle was vandalized by a neighbour. It seems like they banged it with a hammer or something right in the middle of the frame. Is this still safe to use?
frames safety
asked 2 days ago
JonorlJonorl
4612
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
My girlfriend's bicycle was vandalized by a neighbour. It seems like they banged it with a hammer or something right in the middle of the frame. Is this still safe to use?
frames safety
frames safety
asked 2 days ago
JonorlJonorl
4612
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 days ago
JonorlJonorl
4612
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 days ago
JonorlJonorl
4612
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 days ago
JonorlJonorl
4612
asked 2 days ago
JonorlJonorl
4612
4612
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Jonorl is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
10
That looks like a thin-walled aluminum frame. Try this: sit down in a chair. Take an empty aluminum soda can and put it upright on the floor in front of you. Take one of your feet, place it on top of the can and slowly put a decent amount of weight on the can - not enough to crush it, but a good amount of weight. Now carefully lean over, and without removing any of the pressure from your foot on the can, tap the side of the can with your finger. That can will collapse almost immediately if you do it right. Tubes get a lot of their strength from the uniform shape - dents ruin that.
– Andrew Henle
2 days ago
3
I thought Condor Fratello(s) were steel so edit the question with frame material - most answers are assuming aluminium at this point. I expect the answer will still be to not ride the bike but you might get input on how to get it fixed well. It’s certainly a quality frame worth considering fixing (and getting neighbour to foot the bill).
– Swifty
2 days ago
3
If it's steel it's probably safe to ride in the short term, but the bend is extreme enough that it will tend to fatigue and crack over the long term (ie, after hundreds if not thousands of miles). If it does crack the failure is not apt to be catastrophic -- the crack will visible before the frame fails completely. Aluminum, on the other hand, is apt to fail catastrophically after only a few hours use.
– Daniel R Hicks
2 days ago
3
That doesn't look like it's been hit by a hammer, to me. Looks much more like a vehicle has been driven into it or something like that. You'd need to swing hard with a very heavy hammer to do that sort of damage. You'd also have to hit it just right as an off-centre blow would likely be deflected by the curve of the tube. It doesn't look like there have been multiple strikes and I think somebody would have to be pretty lucky to make that hit as a first attempt.
– David Richerby
yesterday
3
@DavidRicherby I agree with your assessment and based on it, I'd say it looks more like an accident than vandalism (of course you can drive a vehicle into it on purpose, but I'd think it's unlikely they did so and then decided to stop after this relatively minor damage). While the distinction doesn't really help, it does fit nicely with Hanlon's Razor: "Never attribute to malice that which is adequately explained by stupidity."
– Jasper
yesterday
|
show 8 more comments
10
That looks like a thin-walled aluminum frame. Try this: sit down in a chair. Take an empty aluminum soda can and put it upright on the floor in front of you. Take one of your feet, place it on top of the can and slowly put a decent amount of weight on the can - not enough to crush it, but a good amount of weight. Now carefully lean over, and without removing any of the pressure from your foot on the can, tap the side of the can with your finger. That can will collapse almost immediately if you do it right. Tubes get a lot of their strength from the uniform shape - dents ruin that.
– Andrew Henle
2 days ago
3
I thought Condor Fratello(s) were steel so edit the question with frame material - most answers are assuming aluminium at this point. I expect the answer will still be to not ride the bike but you might get input on how to get it fixed well. It’s certainly a quality frame worth considering fixing (and getting neighbour to foot the bill).
– Swifty
2 days ago
3
If it's steel it's probably safe to ride in the short term, but the bend is extreme enough that it will tend to fatigue and crack over the long term (ie, after hundreds if not thousands of miles). If it does crack the failure is not apt to be catastrophic -- the crack will visible before the frame fails completely. Aluminum, on the other hand, is apt to fail catastrophically after only a few hours use.
– Daniel R Hicks
2 days ago
3
That doesn't look like it's been hit by a hammer, to me. Looks much more like a vehicle has been driven into it or something like that. You'd need to swing hard with a very heavy hammer to do that sort of damage. You'd also have to hit it just right as an off-centre blow would likely be deflected by the curve of the tube. It doesn't look like there have been multiple strikes and I think somebody would have to be pretty lucky to make that hit as a first attempt.
– David Richerby
yesterday
3
@DavidRicherby I agree with your assessment and based on it, I'd say it looks more like an accident than vandalism (of course you can drive a vehicle into it on purpose, but I'd think it's unlikely they did so and then decided to stop after this relatively minor damage). While the distinction doesn't really help, it does fit nicely with Hanlon's Razor: "Never attribute to malice that which is adequately explained by stupidity."
– Jasper
yesterday
10
10
That looks like a thin-walled aluminum frame. Try this: sit down in a chair. Take an empty aluminum soda can and put it upright on the floor in front of you. Take one of your feet, place it on top of the can and slowly put a decent amount of weight on the can - not enough to crush it, but a good amount of weight. Now carefully lean over, and without removing any of the pressure from your foot on the can, tap the side of the can with your finger. That can will collapse almost immediately if you do it right. Tubes get a lot of their strength from the uniform shape - dents ruin that.
– Andrew Henle
2 days ago
That looks like a thin-walled aluminum frame. Try this: sit down in a chair. Take an empty aluminum soda can and put it upright on the floor in front of you. Take one of your feet, place it on top of the can and slowly put a decent amount of weight on the can - not enough to crush it, but a good amount of weight. Now carefully lean over, and without removing any of the pressure from your foot on the can, tap the side of the can with your finger. That can will collapse almost immediately if you do it right. Tubes get a lot of their strength from the uniform shape - dents ruin that.
– Andrew Henle
2 days ago
3
3
I thought Condor Fratello(s) were steel so edit the question with frame material - most answers are assuming aluminium at this point. I expect the answer will still be to not ride the bike but you might get input on how to get it fixed well. It’s certainly a quality frame worth considering fixing (and getting neighbour to foot the bill).
– Swifty
2 days ago
I thought Condor Fratello(s) were steel so edit the question with frame material - most answers are assuming aluminium at this point. I expect the answer will still be to not ride the bike but you might get input on how to get it fixed well. It’s certainly a quality frame worth considering fixing (and getting neighbour to foot the bill).
– Swifty
2 days ago
3
3
If it's steel it's probably safe to ride in the short term, but the bend is extreme enough that it will tend to fatigue and crack over the long term (ie, after hundreds if not thousands of miles). If it does crack the failure is not apt to be catastrophic -- the crack will visible before the frame fails completely. Aluminum, on the other hand, is apt to fail catastrophically after only a few hours use.
– Daniel R Hicks
2 days ago
If it's steel it's probably safe to ride in the short term, but the bend is extreme enough that it will tend to fatigue and crack over the long term (ie, after hundreds if not thousands of miles). If it does crack the failure is not apt to be catastrophic -- the crack will visible before the frame fails completely. Aluminum, on the other hand, is apt to fail catastrophically after only a few hours use.
– Daniel R Hicks
2 days ago
3
3
That doesn't look like it's been hit by a hammer, to me. Looks much more like a vehicle has been driven into it or something like that. You'd need to swing hard with a very heavy hammer to do that sort of damage. You'd also have to hit it just right as an off-centre blow would likely be deflected by the curve of the tube. It doesn't look like there have been multiple strikes and I think somebody would have to be pretty lucky to make that hit as a first attempt.
– David Richerby
yesterday
That doesn't look like it's been hit by a hammer, to me. Looks much more like a vehicle has been driven into it or something like that. You'd need to swing hard with a very heavy hammer to do that sort of damage. You'd also have to hit it just right as an off-centre blow would likely be deflected by the curve of the tube. It doesn't look like there have been multiple strikes and I think somebody would have to be pretty lucky to make that hit as a first attempt.
– David Richerby
yesterday
3
3
@DavidRicherby I agree with your assessment and based on it, I'd say it looks more like an accident than vandalism (of course you can drive a vehicle into it on purpose, but I'd think it's unlikely they did so and then decided to stop after this relatively minor damage). While the distinction doesn't really help, it does fit nicely with Hanlon's Razor: "Never attribute to malice that which is adequately explained by stupidity."
– Jasper
yesterday
@DavidRicherby I agree with your assessment and based on it, I'd say it looks more like an accident than vandalism (of course you can drive a vehicle into it on purpose, but I'd think it's unlikely they did so and then decided to stop after this relatively minor damage). While the distinction doesn't really help, it does fit nicely with Hanlon's Razor: "Never attribute to malice that which is adequately explained by stupidity."
– Jasper
yesterday
|
show 8 more comments
4 Answers
4
active
oldest
votes
Unfortunately I think that level of damage with a big dent and buckled top tube will make the bike dangerous to ride. There's a chance that when a big bump or pothole is hit the top tube will fold and dump the rider face first into the road.
Additionally, the head tube probably is not aligned with the seat tube anymore, which means the wheels are misaligned which will negatively affect steering.
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
@psmears fixed. BTW, feel free to edit posts for spelling, punctuation, typos etc.
– Argenti Apparatus
2 days ago
Thanks! Yes, I usually do edit, but I can't submit an edit that changes less than six characters, and I couldn't see anything else to improve in your post :)
– psmears
2 days ago
add a comment |
That frame is definitely not safe to ride anymore. While some steel frames can handle dents pretty well, that is some major damage in what seems to me an aluminium frame. The top tube seems both dented and bent, which likely has affected the steering of the bicycle and also introduces risk of the frame bending inwards under stress.
I recommend you don't ride that anymore, start looking for a replacement and see if you can get the person responsible for that to fund it.
answered 2 days ago
Walto SalonenWalto Salonen
36817
add a comment |
Sorry for that act of vandalism that happened to you. But I'd refrain from using this bicycle any longer. You'd have problems riding it in a straight line because the wheels are certainly misaligned now which could even cause more uncertain behaviour at speed. The other danger could reside in the sudden failure of the compromised top tube of the frame.
The only thing you could do, apart from filing a complaint with the police would be to take the bike apart and re-use or sell all the undamaged parts.
answered 2 days ago
CarelCarel
3,6531812
add a comment |
Not safe, due to buckling
That top part of the frame has buckled. As such it has — and I am not exaggerating now — less than one tenth of its design strength. That bike will fold in on itself if you try to use it.
Hence, sorry, but that frame is busted for good.
answered yesterday
MichaelKMichaelK
1412
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
The frame is steel and it is very likely that a new tube can be welded there.
– Vladimir F
yesterday
@VladimirF It can be any metal, aluminium, steel or - most likely - an alloy. Welding aluminium alloys is difficult at best. A used replacement frame can be found for less than 100 USD / 70 EUR equivalent.
– MichaelK
yesterday
In the comments below the question you will find out it is steel.
– Vladimir F
yesterday
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "126"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Jonorl is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58935%2fbanged-frame-is-it-still-safe-to-use%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
Unfortunately I think that level of damage with a big dent and buckled top tube will make the bike dangerous to ride. There's a chance that when a big bump or pothole is hit the top tube will fold and dump the rider face first into the road.
Additionally, the head tube probably is not aligned with the seat tube anymore, which means the wheels are misaligned which will negatively affect steering.
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
@psmears fixed. BTW, feel free to edit posts for spelling, punctuation, typos etc.
– Argenti Apparatus
2 days ago
Thanks! Yes, I usually do edit, but I can't submit an edit that changes less than six characters, and I couldn't see anything else to improve in your post :)
– psmears
2 days ago
add a comment |
Unfortunately I think that level of damage with a big dent and buckled top tube will make the bike dangerous to ride. There's a chance that when a big bump or pothole is hit the top tube will fold and dump the rider face first into the road.
Additionally, the head tube probably is not aligned with the seat tube anymore, which means the wheels are misaligned which will negatively affect steering.
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
@psmears fixed. BTW, feel free to edit posts for spelling, punctuation, typos etc.
– Argenti Apparatus
2 days ago
Thanks! Yes, I usually do edit, but I can't submit an edit that changes less than six characters, and I couldn't see anything else to improve in your post :)
– psmears
2 days ago
add a comment |
Unfortunately I think that level of damage with a big dent and buckled top tube will make the bike dangerous to ride. There's a chance that when a big bump or pothole is hit the top tube will fold and dump the rider face first into the road.
Additionally, the head tube probably is not aligned with the seat tube anymore, which means the wheels are misaligned which will negatively affect steering.
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
Unfortunately I think that level of damage with a big dent and buckled top tube will make the bike dangerous to ride. There's a chance that when a big bump or pothole is hit the top tube will fold and dump the rider face first into the road.
Additionally, the head tube probably is not aligned with the seat tube anymore, which means the wheels are misaligned which will negatively affect steering.
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
edited 2 days ago
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
answered 2 days ago
Argenti ApparatusArgenti Apparatus
33.8k23685
33.8k23685
@psmears fixed. BTW, feel free to edit posts for spelling, punctuation, typos etc.
– Argenti Apparatus
2 days ago
Thanks! Yes, I usually do edit, but I can't submit an edit that changes less than six characters, and I couldn't see anything else to improve in your post :)
– psmears
2 days ago
add a comment |
@psmears fixed. BTW, feel free to edit posts for spelling, punctuation, typos etc.
– Argenti Apparatus
2 days ago
Thanks! Yes, I usually do edit, but I can't submit an edit that changes less than six characters, and I couldn't see anything else to improve in your post :)
– psmears
2 days ago
@psmears fixed. BTW, feel free to edit posts for spelling, punctuation, typos etc.
– Argenti Apparatus
2 days ago
@psmears fixed. BTW, feel free to edit posts for spelling, punctuation, typos etc.
– Argenti Apparatus
2 days ago
Thanks! Yes, I usually do edit, but I can't submit an edit that changes less than six characters, and I couldn't see anything else to improve in your post :)
– psmears
2 days ago
Thanks! Yes, I usually do edit, but I can't submit an edit that changes less than six characters, and I couldn't see anything else to improve in your post :)
– psmears
2 days ago
add a comment |
That frame is definitely not safe to ride anymore. While some steel frames can handle dents pretty well, that is some major damage in what seems to me an aluminium frame. The top tube seems both dented and bent, which likely has affected the steering of the bicycle and also introduces risk of the frame bending inwards under stress.
I recommend you don't ride that anymore, start looking for a replacement and see if you can get the person responsible for that to fund it.
answered 2 days ago
Walto SalonenWalto Salonen
36817
add a comment |
That frame is definitely not safe to ride anymore. While some steel frames can handle dents pretty well, that is some major damage in what seems to me an aluminium frame. The top tube seems both dented and bent, which likely has affected the steering of the bicycle and also introduces risk of the frame bending inwards under stress.
I recommend you don't ride that anymore, start looking for a replacement and see if you can get the person responsible for that to fund it.
answered 2 days ago
Walto SalonenWalto Salonen
36817
add a comment |
That frame is definitely not safe to ride anymore. While some steel frames can handle dents pretty well, that is some major damage in what seems to me an aluminium frame. The top tube seems both dented and bent, which likely has affected the steering of the bicycle and also introduces risk of the frame bending inwards under stress.
I recommend you don't ride that anymore, start looking for a replacement and see if you can get the person responsible for that to fund it.
answered 2 days ago
Walto SalonenWalto Salonen
36817
That frame is definitely not safe to ride anymore. While some steel frames can handle dents pretty well, that is some major damage in what seems to me an aluminium frame. The top tube seems both dented and bent, which likely has affected the steering of the bicycle and also introduces risk of the frame bending inwards under stress.
I recommend you don't ride that anymore, start looking for a replacement and see if you can get the person responsible for that to fund it.
answered 2 days ago
Walto SalonenWalto Salonen
36817
answered 2 days ago
Walto SalonenWalto Salonen
36817
answered 2 days ago
Walto SalonenWalto Salonen
36817
answered 2 days ago
Walto SalonenWalto Salonen
36817
36817
add a comment |
add a comment |
Sorry for that act of vandalism that happened to you. But I'd refrain from using this bicycle any longer. You'd have problems riding it in a straight line because the wheels are certainly misaligned now which could even cause more uncertain behaviour at speed. The other danger could reside in the sudden failure of the compromised top tube of the frame.
The only thing you could do, apart from filing a complaint with the police would be to take the bike apart and re-use or sell all the undamaged parts.
answered 2 days ago
CarelCarel
3,6531812
add a comment |
Sorry for that act of vandalism that happened to you. But I'd refrain from using this bicycle any longer. You'd have problems riding it in a straight line because the wheels are certainly misaligned now which could even cause more uncertain behaviour at speed. The other danger could reside in the sudden failure of the compromised top tube of the frame.
The only thing you could do, apart from filing a complaint with the police would be to take the bike apart and re-use or sell all the undamaged parts.
answered 2 days ago
CarelCarel
3,6531812
add a comment |
Sorry for that act of vandalism that happened to you. But I'd refrain from using this bicycle any longer. You'd have problems riding it in a straight line because the wheels are certainly misaligned now which could even cause more uncertain behaviour at speed. The other danger could reside in the sudden failure of the compromised top tube of the frame.
The only thing you could do, apart from filing a complaint with the police would be to take the bike apart and re-use or sell all the undamaged parts.
answered 2 days ago
CarelCarel
3,6531812
Sorry for that act of vandalism that happened to you. But I'd refrain from using this bicycle any longer. You'd have problems riding it in a straight line because the wheels are certainly misaligned now which could even cause more uncertain behaviour at speed. The other danger could reside in the sudden failure of the compromised top tube of the frame.
The only thing you could do, apart from filing a complaint with the police would be to take the bike apart and re-use or sell all the undamaged parts.
answered 2 days ago
CarelCarel
3,6531812
answered 2 days ago
CarelCarel
3,6531812
answered 2 days ago
CarelCarel
3,6531812
answered 2 days ago
CarelCarel
3,6531812
3,6531812
add a comment |
add a comment |
Not safe, due to buckling
That top part of the frame has buckled. As such it has — and I am not exaggerating now — less than one tenth of its design strength. That bike will fold in on itself if you try to use it.
Hence, sorry, but that frame is busted for good.
answered yesterday
MichaelKMichaelK
1412
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
The frame is steel and it is very likely that a new tube can be welded there.
– Vladimir F
yesterday
@VladimirF It can be any metal, aluminium, steel or - most likely - an alloy. Welding aluminium alloys is difficult at best. A used replacement frame can be found for less than 100 USD / 70 EUR equivalent.
– MichaelK
yesterday
In the comments below the question you will find out it is steel.
– Vladimir F
yesterday
add a comment |
Not safe, due to buckling
That top part of the frame has buckled. As such it has — and I am not exaggerating now — less than one tenth of its design strength. That bike will fold in on itself if you try to use it.
Hence, sorry, but that frame is busted for good.
answered yesterday
MichaelKMichaelK
1412
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
The frame is steel and it is very likely that a new tube can be welded there.
– Vladimir F
yesterday
@VladimirF It can be any metal, aluminium, steel or - most likely - an alloy. Welding aluminium alloys is difficult at best. A used replacement frame can be found for less than 100 USD / 70 EUR equivalent.
– MichaelK
yesterday
In the comments below the question you will find out it is steel.
– Vladimir F
yesterday
add a comment |
Not safe, due to buckling
That top part of the frame has buckled. As such it has — and I am not exaggerating now — less than one tenth of its design strength. That bike will fold in on itself if you try to use it.
Hence, sorry, but that frame is busted for good.
answered yesterday
MichaelKMichaelK
1412
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Not safe, due to buckling
That top part of the frame has buckled. As such it has — and I am not exaggerating now — less than one tenth of its design strength. That bike will fold in on itself if you try to use it.
Hence, sorry, but that frame is busted for good.
answered yesterday
MichaelKMichaelK
1412
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered yesterday
MichaelKMichaelK
1412
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered yesterday
MichaelKMichaelK
1412
answered yesterday
MichaelKMichaelK
1412
1412
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
MichaelK is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
The frame is steel and it is very likely that a new tube can be welded there.
– Vladimir F
yesterday
@VladimirF It can be any metal, aluminium, steel or - most likely - an alloy. Welding aluminium alloys is difficult at best. A used replacement frame can be found for less than 100 USD / 70 EUR equivalent.
– MichaelK
yesterday
In the comments below the question you will find out it is steel.
– Vladimir F
yesterday
add a comment |
The frame is steel and it is very likely that a new tube can be welded there.
– Vladimir F
yesterday
@VladimirF It can be any metal, aluminium, steel or - most likely - an alloy. Welding aluminium alloys is difficult at best. A used replacement frame can be found for less than 100 USD / 70 EUR equivalent.
– MichaelK
yesterday
In the comments below the question you will find out it is steel.
– Vladimir F
yesterday
The frame is steel and it is very likely that a new tube can be welded there.
– Vladimir F
yesterday
The frame is steel and it is very likely that a new tube can be welded there.
– Vladimir F
yesterday
@VladimirF It can be any metal, aluminium, steel or - most likely - an alloy. Welding aluminium alloys is difficult at best. A used replacement frame can be found for less than 100 USD / 70 EUR equivalent.
– MichaelK
yesterday
@VladimirF It can be any metal, aluminium, steel or - most likely - an alloy. Welding aluminium alloys is difficult at best. A used replacement frame can be found for less than 100 USD / 70 EUR equivalent.
– MichaelK
yesterday
In the comments below the question you will find out it is steel.
– Vladimir F
yesterday
In the comments below the question you will find out it is steel.
– Vladimir F
yesterday
add a comment |
Jonorl is a new contributor. Be nice, and check out our Code of Conduct.
Jonorl is a new contributor. Be nice, and check out our Code of Conduct.
Jonorl is a new contributor. Be nice, and check out our Code of Conduct.
Jonorl is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58935%2fbanged-frame-is-it-still-safe-to-use%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
10
That looks like a thin-walled aluminum frame. Try this: sit down in a chair. Take an empty aluminum soda can and put it upright on the floor in front of you. Take one of your feet, place it on top of the can and slowly put a decent amount of weight on the can - not enough to crush it, but a good amount of weight. Now carefully lean over, and without removing any of the pressure from your foot on the can, tap the side of the can with your finger. That can will collapse almost immediately if you do it right. Tubes get a lot of their strength from the uniform shape - dents ruin that.
– Andrew Henle
2 days ago
3
I thought Condor Fratello(s) were steel so edit the question with frame material - most answers are assuming aluminium at this point. I expect the answer will still be to not ride the bike but you might get input on how to get it fixed well. It’s certainly a quality frame worth considering fixing (and getting neighbour to foot the bill).
– Swifty
2 days ago
3
If it's steel it's probably safe to ride in the short term, but the bend is extreme enough that it will tend to fatigue and crack over the long term (ie, after hundreds if not thousands of miles). If it does crack the failure is not apt to be catastrophic -- the crack will visible before the frame fails completely. Aluminum, on the other hand, is apt to fail catastrophically after only a few hours use.
– Daniel R Hicks
2 days ago
3
That doesn't look like it's been hit by a hammer, to me. Looks much more like a vehicle has been driven into it or something like that. You'd need to swing hard with a very heavy hammer to do that sort of damage. You'd also have to hit it just right as an off-centre blow would likely be deflected by the curve of the tube. It doesn't look like there have been multiple strikes and I think somebody would have to be pretty lucky to make that hit as a first attempt.
– David Richerby
yesterday
3
@DavidRicherby I agree with your assessment and based on it, I'd say it looks more like an accident than vandalism (of course you can drive a vehicle into it on purpose, but I'd think it's unlikely they did so and then decided to stop after this relatively minor damage). While the distinction doesn't really help, it does fit nicely with Hanlon's Razor: "Never attribute to malice that which is adequately explained by stupidity."
– Jasper
yesterday