Cannot access remote network after connecting to VPN | Window7
I am using Cisco VPN client (5.0.07.0290) on my window7 machine (64 bit) to connect to the VPN network of my client.
VPN client connection status is shown as "connected", but when I am trying to open any resource / URL within that network, I am getting connection timeout error.
I used the same VPN client on another machine with window7 and everything is working fine, I am not sure what can be the root cause for this issue.
I have already checked following things
- Window firewall is disabled.
- Antivirus is disabled.
Update
I have also tried with SHREW and it is showing as connected but unable to open any URL or resource through the VPN network, seems like the issue is with my machine (Window7)
Can any one point me what might be the possible root cause for this?
windows-7 vpn cisco-vpn-client
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
add a comment |
I am using Cisco VPN client (5.0.07.0290) on my window7 machine (64 bit) to connect to the VPN network of my client.
VPN client connection status is shown as "connected", but when I am trying to open any resource / URL within that network, I am getting connection timeout error.
I used the same VPN client on another machine with window7 and everything is working fine, I am not sure what can be the root cause for this issue.
I have already checked following things
- Window firewall is disabled.
- Antivirus is disabled.
Update
I have also tried with SHREW and it is showing as connected but unable to open any URL or resource through the VPN network, seems like the issue is with my machine (Window7)
Can any one point me what might be the possible root cause for this?
windows-7 vpn cisco-vpn-client
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
can you verify whether your office network blocking any IP series in NAT level and also check whether your windows 7 machine is running with DHCP or static IP?
– vembutech
Feb 19 '15 at 20:11
@vembutech: I have already checked this by installing same client on another machine and its working fine, both the machines are in the same office netoowrk
– Umesh Awasthi
Feb 19 '15 at 20:18
I've had this with virtual network adapters for VMs: a static subnet configured for some arbitrary 192.168.0.0/16 network that conflicted with the VPN's network. doesroute printshow anything that might conflict that's preventing you from routing through the VPN?
– Tyler Szabo
Feb 23 '15 at 23:06
Did you check Peer response timeout ?
– harrymc
Feb 24 '15 at 7:36
What is your local subnet? What is the remote subnet? Do you have any adapters configured locally with the same subnet as the remote subnet? If so, you might find that the packets are being placed on a local adapter rather than routing through the vpn.
– Dave Lucre
Feb 25 '15 at 4:34
add a comment |
I am using Cisco VPN client (5.0.07.0290) on my window7 machine (64 bit) to connect to the VPN network of my client.
VPN client connection status is shown as "connected", but when I am trying to open any resource / URL within that network, I am getting connection timeout error.
I used the same VPN client on another machine with window7 and everything is working fine, I am not sure what can be the root cause for this issue.
I have already checked following things
- Window firewall is disabled.
- Antivirus is disabled.
Update
I have also tried with SHREW and it is showing as connected but unable to open any URL or resource through the VPN network, seems like the issue is with my machine (Window7)
Can any one point me what might be the possible root cause for this?
windows-7 vpn cisco-vpn-client
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
I am using Cisco VPN client (5.0.07.0290) on my window7 machine (64 bit) to connect to the VPN network of my client.
VPN client connection status is shown as "connected", but when I am trying to open any resource / URL within that network, I am getting connection timeout error.
I used the same VPN client on another machine with window7 and everything is working fine, I am not sure what can be the root cause for this issue.
I have already checked following things
- Window firewall is disabled.
- Antivirus is disabled.
Update
I have also tried with SHREW and it is showing as connected but unable to open any URL or resource through the VPN network, seems like the issue is with my machine (Window7)
Can any one point me what might be the possible root cause for this?
windows-7 vpn cisco-vpn-client
windows-7 vpn cisco-vpn-client
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
edited Oct 3 '16 at 10:22
Hennes
58.9k792141
58.9k792141
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
asked Feb 19 '15 at 20:00
Umesh AwasthiUmesh Awasthi
5616
5616
can you verify whether your office network blocking any IP series in NAT level and also check whether your windows 7 machine is running with DHCP or static IP?
– vembutech
Feb 19 '15 at 20:11
@vembutech: I have already checked this by installing same client on another machine and its working fine, both the machines are in the same office netoowrk
– Umesh Awasthi
Feb 19 '15 at 20:18
I've had this with virtual network adapters for VMs: a static subnet configured for some arbitrary 192.168.0.0/16 network that conflicted with the VPN's network. doesroute printshow anything that might conflict that's preventing you from routing through the VPN?
– Tyler Szabo
Feb 23 '15 at 23:06
Did you check Peer response timeout ?
– harrymc
Feb 24 '15 at 7:36
What is your local subnet? What is the remote subnet? Do you have any adapters configured locally with the same subnet as the remote subnet? If so, you might find that the packets are being placed on a local adapter rather than routing through the vpn.
– Dave Lucre
Feb 25 '15 at 4:34
add a comment |
can you verify whether your office network blocking any IP series in NAT level and also check whether your windows 7 machine is running with DHCP or static IP?
– vembutech
Feb 19 '15 at 20:11
@vembutech: I have already checked this by installing same client on another machine and its working fine, both the machines are in the same office netoowrk
– Umesh Awasthi
Feb 19 '15 at 20:18
I've had this with virtual network adapters for VMs: a static subnet configured for some arbitrary 192.168.0.0/16 network that conflicted with the VPN's network. doesroute printshow anything that might conflict that's preventing you from routing through the VPN?
– Tyler Szabo
Feb 23 '15 at 23:06
Did you check Peer response timeout ?
– harrymc
Feb 24 '15 at 7:36
What is your local subnet? What is the remote subnet? Do you have any adapters configured locally with the same subnet as the remote subnet? If so, you might find that the packets are being placed on a local adapter rather than routing through the vpn.
– Dave Lucre
Feb 25 '15 at 4:34
can you verify whether your office network blocking any IP series in NAT level and also check whether your windows 7 machine is running with DHCP or static IP?
– vembutech
Feb 19 '15 at 20:11
can you verify whether your office network blocking any IP series in NAT level and also check whether your windows 7 machine is running with DHCP or static IP?
– vembutech
Feb 19 '15 at 20:11
@vembutech: I have already checked this by installing same client on another machine and its working fine, both the machines are in the same office netoowrk
– Umesh Awasthi
Feb 19 '15 at 20:18
@vembutech: I have already checked this by installing same client on another machine and its working fine, both the machines are in the same office netoowrk
– Umesh Awasthi
Feb 19 '15 at 20:18
I've had this with virtual network adapters for VMs: a static subnet configured for some arbitrary 192.168.0.0/16 network that conflicted with the VPN's network. does
route print show anything that might conflict that's preventing you from routing through the VPN?– Tyler Szabo
Feb 23 '15 at 23:06
I've had this with virtual network adapters for VMs: a static subnet configured for some arbitrary 192.168.0.0/16 network that conflicted with the VPN's network. does
route print show anything that might conflict that's preventing you from routing through the VPN?– Tyler Szabo
Feb 23 '15 at 23:06
Did you check Peer response timeout ?
– harrymc
Feb 24 '15 at 7:36
Did you check Peer response timeout ?
– harrymc
Feb 24 '15 at 7:36
What is your local subnet? What is the remote subnet? Do you have any adapters configured locally with the same subnet as the remote subnet? If so, you might find that the packets are being placed on a local adapter rather than routing through the vpn.
– Dave Lucre
Feb 25 '15 at 4:34
What is your local subnet? What is the remote subnet? Do you have any adapters configured locally with the same subnet as the remote subnet? If so, you might find that the packets are being placed on a local adapter rather than routing through the vpn.
– Dave Lucre
Feb 25 '15 at 4:34
add a comment |
1 Answer
1
active
oldest
votes
I had a similar issue as well. Here is what I did:
- Rename/Delete the
hostsfile - Use APIPA to configure a fallback static IP for your DHCP connection
- Use the router configuration to allow tunneling
- Use the browser preferences to setup a VPN proxy server PAC file
- Use the Windows Services configuration to enable the Secure Socket Tunneling Protocol Service
References
Windows 7: Alternate IP Address
Understanding Web Proxy Configuration
Microsoft TCP/IP Host Name Resolution Order
Cisco VPN Client FAQ
Secure Socket Tunneling Protocol Service
PAC Best Practices
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f880118%2fcannot-access-remote-network-after-connecting-to-vpn-window7%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
I had a similar issue as well. Here is what I did:
- Rename/Delete the
hostsfile - Use APIPA to configure a fallback static IP for your DHCP connection
- Use the router configuration to allow tunneling
- Use the browser preferences to setup a VPN proxy server PAC file
- Use the Windows Services configuration to enable the Secure Socket Tunneling Protocol Service
References
Windows 7: Alternate IP Address
Understanding Web Proxy Configuration
Microsoft TCP/IP Host Name Resolution Order
Cisco VPN Client FAQ
Secure Socket Tunneling Protocol Service
PAC Best Practices
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
add a comment |
I had a similar issue as well. Here is what I did:
- Rename/Delete the
hostsfile - Use APIPA to configure a fallback static IP for your DHCP connection
- Use the router configuration to allow tunneling
- Use the browser preferences to setup a VPN proxy server PAC file
- Use the Windows Services configuration to enable the Secure Socket Tunneling Protocol Service
References
Windows 7: Alternate IP Address
Understanding Web Proxy Configuration
Microsoft TCP/IP Host Name Resolution Order
Cisco VPN Client FAQ
Secure Socket Tunneling Protocol Service
PAC Best Practices
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
add a comment |
I had a similar issue as well. Here is what I did:
- Rename/Delete the
hostsfile - Use APIPA to configure a fallback static IP for your DHCP connection
- Use the router configuration to allow tunneling
- Use the browser preferences to setup a VPN proxy server PAC file
- Use the Windows Services configuration to enable the Secure Socket Tunneling Protocol Service
References
Windows 7: Alternate IP Address
Understanding Web Proxy Configuration
Microsoft TCP/IP Host Name Resolution Order
Cisco VPN Client FAQ
Secure Socket Tunneling Protocol Service
PAC Best Practices
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
I had a similar issue as well. Here is what I did:
- Rename/Delete the
hostsfile - Use APIPA to configure a fallback static IP for your DHCP connection
- Use the router configuration to allow tunneling
- Use the browser preferences to setup a VPN proxy server PAC file
- Use the Windows Services configuration to enable the Secure Socket Tunneling Protocol Service
References
Windows 7: Alternate IP Address
Understanding Web Proxy Configuration
Microsoft TCP/IP Host Name Resolution Order
Cisco VPN Client FAQ
Secure Socket Tunneling Protocol Service
PAC Best Practices
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
edited Mar 2 '15 at 20:53
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
answered Mar 2 '15 at 18:59
Paul SweattePaul Sweatte
548215
548215
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f880118%2fcannot-access-remote-network-after-connecting-to-vpn-window7%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
can you verify whether your office network blocking any IP series in NAT level and also check whether your windows 7 machine is running with DHCP or static IP?
– vembutech
Feb 19 '15 at 20:11
@vembutech: I have already checked this by installing same client on another machine and its working fine, both the machines are in the same office netoowrk
– Umesh Awasthi
Feb 19 '15 at 20:18
I've had this with virtual network adapters for VMs: a static subnet configured for some arbitrary 192.168.0.0/16 network that conflicted with the VPN's network. does
route printshow anything that might conflict that's preventing you from routing through the VPN?– Tyler Szabo
Feb 23 '15 at 23:06
Did you check Peer response timeout ?
– harrymc
Feb 24 '15 at 7:36
What is your local subnet? What is the remote subnet? Do you have any adapters configured locally with the same subnet as the remote subnet? If so, you might find that the packets are being placed on a local adapter rather than routing through the vpn.
– Dave Lucre
Feb 25 '15 at 4:34