Firewall software with ip translation capability [closed]
I'm running a local socks proxy on my Windows machine. I have some ip adresses which can be reached only through this proxy because actually it is an ssh tunnel set up via putty. I thought maybe a firewall software with NAT settings could tunnel every request toward those ips through the proxy but I haven't find one yet. Since I would not use other capabilites of the firewall a lightweight one would fit the best. Although I have a tp-link archer c7 router I do not see NAT configuration option in it. Could you suggest a solution for this problem?
networking proxy firewall nat
asked Jan 13 at 7:29
apregapreg
1396
closed as off-topic by n8te, Ramhound, harrymc, DavidPostill♦ Jan 13 at 9:14
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "Questions seeking product, service, or learning material recommendations are off-topic because they become outdated quickly and attract opinion-based answers. Instead, describe your situation and the specific problem you're trying to solve. Share your research. Here are a few suggestions on how to properly ask this type of question." – n8te, Ramhound, harrymc, DavidPostill
If this question can be reworded to fit the rules in the help center, please edit the question.
add a comment |
I'm running a local socks proxy on my Windows machine. I have some ip adresses which can be reached only through this proxy because actually it is an ssh tunnel set up via putty. I thought maybe a firewall software with NAT settings could tunnel every request toward those ips through the proxy but I haven't find one yet. Since I would not use other capabilites of the firewall a lightweight one would fit the best. Although I have a tp-link archer c7 router I do not see NAT configuration option in it. Could you suggest a solution for this problem?
networking proxy firewall nat
asked Jan 13 at 7:29
apregapreg
1396
closed as off-topic by n8te, Ramhound, harrymc, DavidPostill♦ Jan 13 at 9:14
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "Questions seeking product, service, or learning material recommendations are off-topic because they become outdated quickly and attract opinion-based answers. Instead, describe your situation and the specific problem you're trying to solve. Share your research. Here are a few suggestions on how to properly ask this type of question." – n8te, Ramhound, harrymc, DavidPostill
If this question can be reworded to fit the rules in the help center, please edit the question.
Questions seeking software recommendations are out of scope at SuperUser
– Ramhound
Jan 13 at 7:38
I found proxifier, proxycap, widecap, sockscap can do the job.
– apreg
Jan 16 at 15:09
add a comment |
I'm running a local socks proxy on my Windows machine. I have some ip adresses which can be reached only through this proxy because actually it is an ssh tunnel set up via putty. I thought maybe a firewall software with NAT settings could tunnel every request toward those ips through the proxy but I haven't find one yet. Since I would not use other capabilites of the firewall a lightweight one would fit the best. Although I have a tp-link archer c7 router I do not see NAT configuration option in it. Could you suggest a solution for this problem?
networking proxy firewall nat
asked Jan 13 at 7:29
apregapreg
1396
I'm running a local socks proxy on my Windows machine. I have some ip adresses which can be reached only through this proxy because actually it is an ssh tunnel set up via putty. I thought maybe a firewall software with NAT settings could tunnel every request toward those ips through the proxy but I haven't find one yet. Since I would not use other capabilites of the firewall a lightweight one would fit the best. Although I have a tp-link archer c7 router I do not see NAT configuration option in it. Could you suggest a solution for this problem?
networking proxy firewall nat
networking proxy firewall nat
asked Jan 13 at 7:29
apregapreg
1396
asked Jan 13 at 7:29
apregapreg
1396
edited Jan 16 at 14:54
apreg
asked Jan 13 at 7:29
apregapreg
1396
asked Jan 13 at 7:29
apregapreg
1396
asked Jan 13 at 7:29
apregapreg
1396
1396
closed as off-topic by n8te, Ramhound, harrymc, DavidPostill♦ Jan 13 at 9:14
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "Questions seeking product, service, or learning material recommendations are off-topic because they become outdated quickly and attract opinion-based answers. Instead, describe your situation and the specific problem you're trying to solve. Share your research. Here are a few suggestions on how to properly ask this type of question." – n8te, Ramhound, harrymc, DavidPostill
If this question can be reworded to fit the rules in the help center, please edit the question.
closed as off-topic by n8te, Ramhound, harrymc, DavidPostill♦ Jan 13 at 9:14
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "Questions seeking product, service, or learning material recommendations are off-topic because they become outdated quickly and attract opinion-based answers. Instead, describe your situation and the specific problem you're trying to solve. Share your research. Here are a few suggestions on how to properly ask this type of question." – n8te, Ramhound, harrymc, DavidPostill
If this question can be reworded to fit the rules in the help center, please edit the question.
Questions seeking software recommendations are out of scope at SuperUser
– Ramhound
Jan 13 at 7:38
I found proxifier, proxycap, widecap, sockscap can do the job.
– apreg
Jan 16 at 15:09
add a comment |
Questions seeking software recommendations are out of scope at SuperUser
– Ramhound
Jan 13 at 7:38
I found proxifier, proxycap, widecap, sockscap can do the job.
– apreg
Jan 16 at 15:09
Questions seeking software recommendations are out of scope at SuperUser
– Ramhound
Jan 13 at 7:38
Questions seeking software recommendations are out of scope at SuperUser
– Ramhound
Jan 13 at 7:38
I found proxifier, proxycap, widecap, sockscap can do the job.
– apreg
Jan 16 at 15:09
I found proxifier, proxycap, widecap, sockscap can do the job.
– apreg
Jan 16 at 15:09
add a comment |
1 Answer
1
active
oldest
votes
Even with the native firmware, the Archer C7 runs Linux, so has full Linux kernel firewall and IP-rewriting capabilities. These are just not exposed in the UI. However, you can install OpenWRT (or other open firmware derived from OpenWRT) on the router to be able to access these capabilities.
So you can either set it up to route back those requests to your Windows machine with the socks proxy, or you could run the socks proxy on the router in the first place.
Note you'll need to do a bit of reading how to configure all this, and you'll have to get familiar with the Linux command-line, though possible derived firmware (like DD-WRT) may have some UI ways to set this up (but I have no idea if they are complete).
I can't give any Windows software recommendations.
answered Jan 13 at 7:47
dirktdirkt
9,36731221
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Even with the native firmware, the Archer C7 runs Linux, so has full Linux kernel firewall and IP-rewriting capabilities. These are just not exposed in the UI. However, you can install OpenWRT (or other open firmware derived from OpenWRT) on the router to be able to access these capabilities.
So you can either set it up to route back those requests to your Windows machine with the socks proxy, or you could run the socks proxy on the router in the first place.
Note you'll need to do a bit of reading how to configure all this, and you'll have to get familiar with the Linux command-line, though possible derived firmware (like DD-WRT) may have some UI ways to set this up (but I have no idea if they are complete).
I can't give any Windows software recommendations.
answered Jan 13 at 7:47
dirktdirkt
9,36731221
add a comment |
Even with the native firmware, the Archer C7 runs Linux, so has full Linux kernel firewall and IP-rewriting capabilities. These are just not exposed in the UI. However, you can install OpenWRT (or other open firmware derived from OpenWRT) on the router to be able to access these capabilities.
So you can either set it up to route back those requests to your Windows machine with the socks proxy, or you could run the socks proxy on the router in the first place.
Note you'll need to do a bit of reading how to configure all this, and you'll have to get familiar with the Linux command-line, though possible derived firmware (like DD-WRT) may have some UI ways to set this up (but I have no idea if they are complete).
I can't give any Windows software recommendations.
answered Jan 13 at 7:47
dirktdirkt
9,36731221
add a comment |
Even with the native firmware, the Archer C7 runs Linux, so has full Linux kernel firewall and IP-rewriting capabilities. These are just not exposed in the UI. However, you can install OpenWRT (or other open firmware derived from OpenWRT) on the router to be able to access these capabilities.
So you can either set it up to route back those requests to your Windows machine with the socks proxy, or you could run the socks proxy on the router in the first place.
Note you'll need to do a bit of reading how to configure all this, and you'll have to get familiar with the Linux command-line, though possible derived firmware (like DD-WRT) may have some UI ways to set this up (but I have no idea if they are complete).
I can't give any Windows software recommendations.
answered Jan 13 at 7:47
dirktdirkt
9,36731221
Even with the native firmware, the Archer C7 runs Linux, so has full Linux kernel firewall and IP-rewriting capabilities. These are just not exposed in the UI. However, you can install OpenWRT (or other open firmware derived from OpenWRT) on the router to be able to access these capabilities.
So you can either set it up to route back those requests to your Windows machine with the socks proxy, or you could run the socks proxy on the router in the first place.
Note you'll need to do a bit of reading how to configure all this, and you'll have to get familiar with the Linux command-line, though possible derived firmware (like DD-WRT) may have some UI ways to set this up (but I have no idea if they are complete).
I can't give any Windows software recommendations.
answered Jan 13 at 7:47
dirktdirkt
9,36731221
answered Jan 13 at 7:47
dirktdirkt
9,36731221
answered Jan 13 at 7:47
dirktdirkt
9,36731221
answered Jan 13 at 7:47
dirktdirkt
9,36731221
9,36731221
add a comment |
add a comment |
Questions seeking software recommendations are out of scope at SuperUser
– Ramhound
Jan 13 at 7:38
I found proxifier, proxycap, widecap, sockscap can do the job.
– apreg
Jan 16 at 15:09