smb sharefolder not reachable over just one of two win10 clients (0x80004005)
I have a little confusing problem.
I have two samba server running. The first one is an little NAS direct on my router and the secound one on my pi3. if i try to connect from my win10 workstation over LAN or WLAN to my router it works fine, but if i try to connect to the pi3 i get the 0x80004005 error.
At next i tried to connect over my laptop also with win10 as the OS on it. i tried both the LAN and WLAN Segments to connect to the NAS and pi3 and it works fine. i tried to connect also over an virtual machine on my workstation, also with an win 10 OS to both NAS and pi3 and it works. But that confuse me, because i thought thats an network card problem, but it isnt. it looks like its an problem on my win10 system, but i cant figure out which options i have to change. The standard options like firewall off, changing network to privat, deactivation ipv6, activating sharefolder view options were did without positiv resolutions. an tip would be cool. thx
windows-10 samba
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
add a comment |
I have a little confusing problem.
I have two samba server running. The first one is an little NAS direct on my router and the secound one on my pi3. if i try to connect from my win10 workstation over LAN or WLAN to my router it works fine, but if i try to connect to the pi3 i get the 0x80004005 error.
At next i tried to connect over my laptop also with win10 as the OS on it. i tried both the LAN and WLAN Segments to connect to the NAS and pi3 and it works fine. i tried to connect also over an virtual machine on my workstation, also with an win 10 OS to both NAS and pi3 and it works. But that confuse me, because i thought thats an network card problem, but it isnt. it looks like its an problem on my win10 system, but i cant figure out which options i have to change. The standard options like firewall off, changing network to privat, deactivation ipv6, activating sharefolder view options were did without positiv resolutions. an tip would be cool. thx
windows-10 samba
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
1
Are you able to edit your question to add in some linebreaks and grammar? It is very confusing to understand at the moment.
– Burgi
Jan 2 at 16:52
When you edit your question, to improve your grammar, include which version of SMB you are using. If you do nothing else include that information since it's required to answer your question.
– Ramhound
Jan 2 at 18:35
add a comment |
I have a little confusing problem.
I have two samba server running. The first one is an little NAS direct on my router and the secound one on my pi3. if i try to connect from my win10 workstation over LAN or WLAN to my router it works fine, but if i try to connect to the pi3 i get the 0x80004005 error.
At next i tried to connect over my laptop also with win10 as the OS on it. i tried both the LAN and WLAN Segments to connect to the NAS and pi3 and it works fine. i tried to connect also over an virtual machine on my workstation, also with an win 10 OS to both NAS and pi3 and it works. But that confuse me, because i thought thats an network card problem, but it isnt. it looks like its an problem on my win10 system, but i cant figure out which options i have to change. The standard options like firewall off, changing network to privat, deactivation ipv6, activating sharefolder view options were did without positiv resolutions. an tip would be cool. thx
windows-10 samba
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
I have a little confusing problem.
I have two samba server running. The first one is an little NAS direct on my router and the secound one on my pi3. if i try to connect from my win10 workstation over LAN or WLAN to my router it works fine, but if i try to connect to the pi3 i get the 0x80004005 error.
At next i tried to connect over my laptop also with win10 as the OS on it. i tried both the LAN and WLAN Segments to connect to the NAS and pi3 and it works fine. i tried to connect also over an virtual machine on my workstation, also with an win 10 OS to both NAS and pi3 and it works. But that confuse me, because i thought thats an network card problem, but it isnt. it looks like its an problem on my win10 system, but i cant figure out which options i have to change. The standard options like firewall off, changing network to privat, deactivation ipv6, activating sharefolder view options were did without positiv resolutions. an tip would be cool. thx
windows-10 samba
windows-10 samba
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
edited Jan 2 at 17:47
Eduard Tester
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
asked Jan 2 at 16:43
Eduard TesterEduard Tester
11
11
1
Are you able to edit your question to add in some linebreaks and grammar? It is very confusing to understand at the moment.
– Burgi
Jan 2 at 16:52
When you edit your question, to improve your grammar, include which version of SMB you are using. If you do nothing else include that information since it's required to answer your question.
– Ramhound
Jan 2 at 18:35
add a comment |
1
Are you able to edit your question to add in some linebreaks and grammar? It is very confusing to understand at the moment.
– Burgi
Jan 2 at 16:52
When you edit your question, to improve your grammar, include which version of SMB you are using. If you do nothing else include that information since it's required to answer your question.
– Ramhound
Jan 2 at 18:35
1
1
Are you able to edit your question to add in some linebreaks and grammar? It is very confusing to understand at the moment.
– Burgi
Jan 2 at 16:52
Are you able to edit your question to add in some linebreaks and grammar? It is very confusing to understand at the moment.
– Burgi
Jan 2 at 16:52
When you edit your question, to improve your grammar, include which version of SMB you are using. If you do nothing else include that information since it's required to answer your question.
– Ramhound
Jan 2 at 18:35
When you edit your question, to improve your grammar, include which version of SMB you are using. If you do nothing else include that information since it's required to answer your question.
– Ramhound
Jan 2 at 18:35
add a comment |
1 Answer
1
active
oldest
votes
So. After i was searchin in the hole internet for some answers i got one, who change me the Errorcode from (0x80004005) to (0x80070035)
1.) Services -> TCP/IP NetBIOS Helper (Set it to automatic and start the service)
2.) Explorer -> Control Panel -> Network and Internet -> Network and Shareing Center -> Change adapter settings -> Properties -> Properties of TCP ipv4 -> Advanced -> WINS -> Enable NetBIOS over TCP/IP -> OK
3.) Regedit -> ComputerHKEY_LOCAL_MACHINESOFTWAREMicrosoftMSLicensing -> Delete all entries (hardwareID and Store in my case) in it
after that i tried to connect again to my share, but it still doesnt work. But the Errorcode changed to 0x80070035 and so on i searched again and found the right answer.
1) gpedit.msc -> ComputerkonfigurationAdministrative VorlagenNetzwerkLanMan-Arbeitsstation -> and set the unsecure gastaccount activation to activ
thats it! and thx a lot to all dudes who ask some shit and congrats me to my worse english skills.
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
really? -1 for my answer? fu!
– Eduard Tester
Jan 8 at 9:49
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1389851%2fsmb-sharefolder-not-reachable-over-just-one-of-two-win10-clients-0x80004005%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
So. After i was searchin in the hole internet for some answers i got one, who change me the Errorcode from (0x80004005) to (0x80070035)
1.) Services -> TCP/IP NetBIOS Helper (Set it to automatic and start the service)
2.) Explorer -> Control Panel -> Network and Internet -> Network and Shareing Center -> Change adapter settings -> Properties -> Properties of TCP ipv4 -> Advanced -> WINS -> Enable NetBIOS over TCP/IP -> OK
3.) Regedit -> ComputerHKEY_LOCAL_MACHINESOFTWAREMicrosoftMSLicensing -> Delete all entries (hardwareID and Store in my case) in it
after that i tried to connect again to my share, but it still doesnt work. But the Errorcode changed to 0x80070035 and so on i searched again and found the right answer.
1) gpedit.msc -> ComputerkonfigurationAdministrative VorlagenNetzwerkLanMan-Arbeitsstation -> and set the unsecure gastaccount activation to activ
thats it! and thx a lot to all dudes who ask some shit and congrats me to my worse english skills.
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
really? -1 for my answer? fu!
– Eduard Tester
Jan 8 at 9:49
add a comment |
So. After i was searchin in the hole internet for some answers i got one, who change me the Errorcode from (0x80004005) to (0x80070035)
1.) Services -> TCP/IP NetBIOS Helper (Set it to automatic and start the service)
2.) Explorer -> Control Panel -> Network and Internet -> Network and Shareing Center -> Change adapter settings -> Properties -> Properties of TCP ipv4 -> Advanced -> WINS -> Enable NetBIOS over TCP/IP -> OK
3.) Regedit -> ComputerHKEY_LOCAL_MACHINESOFTWAREMicrosoftMSLicensing -> Delete all entries (hardwareID and Store in my case) in it
after that i tried to connect again to my share, but it still doesnt work. But the Errorcode changed to 0x80070035 and so on i searched again and found the right answer.
1) gpedit.msc -> ComputerkonfigurationAdministrative VorlagenNetzwerkLanMan-Arbeitsstation -> and set the unsecure gastaccount activation to activ
thats it! and thx a lot to all dudes who ask some shit and congrats me to my worse english skills.
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
really? -1 for my answer? fu!
– Eduard Tester
Jan 8 at 9:49
add a comment |
So. After i was searchin in the hole internet for some answers i got one, who change me the Errorcode from (0x80004005) to (0x80070035)
1.) Services -> TCP/IP NetBIOS Helper (Set it to automatic and start the service)
2.) Explorer -> Control Panel -> Network and Internet -> Network and Shareing Center -> Change adapter settings -> Properties -> Properties of TCP ipv4 -> Advanced -> WINS -> Enable NetBIOS over TCP/IP -> OK
3.) Regedit -> ComputerHKEY_LOCAL_MACHINESOFTWAREMicrosoftMSLicensing -> Delete all entries (hardwareID and Store in my case) in it
after that i tried to connect again to my share, but it still doesnt work. But the Errorcode changed to 0x80070035 and so on i searched again and found the right answer.
1) gpedit.msc -> ComputerkonfigurationAdministrative VorlagenNetzwerkLanMan-Arbeitsstation -> and set the unsecure gastaccount activation to activ
thats it! and thx a lot to all dudes who ask some shit and congrats me to my worse english skills.
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
So. After i was searchin in the hole internet for some answers i got one, who change me the Errorcode from (0x80004005) to (0x80070035)
1.) Services -> TCP/IP NetBIOS Helper (Set it to automatic and start the service)
2.) Explorer -> Control Panel -> Network and Internet -> Network and Shareing Center -> Change adapter settings -> Properties -> Properties of TCP ipv4 -> Advanced -> WINS -> Enable NetBIOS over TCP/IP -> OK
3.) Regedit -> ComputerHKEY_LOCAL_MACHINESOFTWAREMicrosoftMSLicensing -> Delete all entries (hardwareID and Store in my case) in it
after that i tried to connect again to my share, but it still doesnt work. But the Errorcode changed to 0x80070035 and so on i searched again and found the right answer.
1) gpedit.msc -> ComputerkonfigurationAdministrative VorlagenNetzwerkLanMan-Arbeitsstation -> and set the unsecure gastaccount activation to activ
thats it! and thx a lot to all dudes who ask some shit and congrats me to my worse english skills.
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
answered Jan 3 at 15:29
Eduard TesterEduard Tester
11
11
really? -1 for my answer? fu!
– Eduard Tester
Jan 8 at 9:49
add a comment |
really? -1 for my answer? fu!
– Eduard Tester
Jan 8 at 9:49
really? -1 for my answer? fu!
– Eduard Tester
Jan 8 at 9:49
really? -1 for my answer? fu!
– Eduard Tester
Jan 8 at 9:49
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1389851%2fsmb-sharefolder-not-reachable-over-just-one-of-two-win10-clients-0x80004005%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Are you able to edit your question to add in some linebreaks and grammar? It is very confusing to understand at the moment.
– Burgi
Jan 2 at 16:52
When you edit your question, to improve your grammar, include which version of SMB you are using. If you do nothing else include that information since it's required to answer your question.
– Ramhound
Jan 2 at 18:35