I/O error while communicating with scanner

up vote
1
down vote

favorite

When scanning document from windows 10 on a Samsung Xpress M2870FD printer, it fails with

"I/O error while communicating with the device. Please wait and try scanning again. If it does not help, please turn the device off, then switch it on and wait while it warms up."

I uninstalled the driver and installed it again, but the same error appears. The same error also appears on other PCs.

edited Oct 16 at 15:32

K7AAY

3,21321437

asked Oct 16 at 14:12

VEGA

449

add a comment |

up vote
1
down vote

favorite

When scanning document from windows 10 on a Samsung Xpress M2870FD printer, it fails with

"I/O error while communicating with the device. Please wait and try scanning again. If it does not help, please turn the device off, then switch it on and wait while it warms up."

I uninstalled the driver and installed it again, but the same error appears. The same error also appears on other PCs.

edited Oct 16 at 15:32

K7AAY

3,21321437

asked Oct 16 at 14:12

VEGA

449

add a comment |

up vote
1
down vote

favorite

When scanning document from windows 10 on a Samsung Xpress M2870FD printer, it fails with

"I/O error while communicating with the device. Please wait and try scanning again. If it does not help, please turn the device off, then switch it on and wait while it warms up."

I uninstalled the driver and installed it again, but the same error appears. The same error also appears on other PCs.

edited Oct 16 at 15:32

K7AAY

3,21321437

asked Oct 16 at 14:12

VEGA

449

When scanning document from windows 10 on a Samsung Xpress M2870FD printer, it fails with

"I/O error while communicating with the device. Please wait and try scanning again. If it does not help, please turn the device off, then switch it on and wait while it warms up."

I uninstalled the driver and installed it again, but the same error appears. The same error also appears on other PCs.

printer multi-function-printer

edited Oct 16 at 15:32

K7AAY

3,21321437

asked Oct 16 at 14:12

VEGA

449

edited Oct 16 at 15:32

K7AAY

3,21321437

asked Oct 16 at 14:12

VEGA

449

edited Oct 16 at 15:32

K7AAY

3,21321437

edited Oct 16 at 15:32

K7AAY

3,21321437

edited Oct 16 at 15:32

K7AAY

3,21321437

asked Oct 16 at 14:12

VEGA

449

asked Oct 16 at 14:12

VEGA

449

asked Oct 16 at 14:12

VEGA

449

add a comment |

2 Answers
2

active

oldest

votes

up vote
0
down vote

accepted

You may try to download and install M2870FD software from
Software and driver results for: Samsung Xpress SL-M2870FD Laser Multifunction Printer.

The section to look at is "Driver-Product Installation Software", both the
"Print Driver" and "Scan Driver".

If you are using the Easy Print Manager, open it and click "Scan to Pc Setting",
and check it is set to Enable.

If this does not help, it would help to know if you are scanning from the printer
or from the desktop, and if you are having this problem in both modes.

answered Oct 16 at 14:29

harrymc

249k10257549

Thanks for reply. I installed drivers with CD which was into printer box. ok i will download and try as you advised and will inform results.
– VEGA
Oct 17 at 5:29

Thanks for help friend. it is solved. I did everything as you told me. Thanks.
– VEGA
Oct 19 at 5:14

add a comment |

up vote
0
down vote

A Google search for "I/O error while communicating with the device" returned this HP Support article. HP (which acquired Samsung's printer business some time ago) states that this is caused by a compatibility issue introduced in Windows 10 version 1803 (Redstone 4):

This error message displays when the scan application is unable to recognize the changes in Windows 10 RS4.

You'll need to update your scanner software to fix this. The latest software and drivers are available on HP's support page for your MFP.

answered Nov 23 at 13:23

bwDraco

36.4k36135177

add a comment |

Your Answer

StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});

}
});

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1367301%2fi-o-error-while-communicating-with-scanner%23new-answer', 'question_page');
}
);

Post as a guest

Name

Required, but never shown

2 Answers
2

active

oldest

votes

2 Answers
2

active

oldest

votes

up vote
0
down vote

accepted

You may try to download and install M2870FD software from
Software and driver results for: Samsung Xpress SL-M2870FD Laser Multifunction Printer.

The section to look at is "Driver-Product Installation Software", both the
"Print Driver" and "Scan Driver".

If you are using the Easy Print Manager, open it and click "Scan to Pc Setting",
and check it is set to Enable.

If this does not help, it would help to know if you are scanning from the printer
or from the desktop, and if you are having this problem in both modes.

answered Oct 16 at 14:29

harrymc

249k10257549

Thanks for reply. I installed drivers with CD which was into printer box. ok i will download and try as you advised and will inform results.
– VEGA
Oct 17 at 5:29

Thanks for help friend. it is solved. I did everything as you told me. Thanks.
– VEGA
Oct 19 at 5:14

add a comment |

up vote
0
down vote

accepted

You may try to download and install M2870FD software from
Software and driver results for: Samsung Xpress SL-M2870FD Laser Multifunction Printer.

The section to look at is "Driver-Product Installation Software", both the
"Print Driver" and "Scan Driver".

If you are using the Easy Print Manager, open it and click "Scan to Pc Setting",
and check it is set to Enable.

If this does not help, it would help to know if you are scanning from the printer
or from the desktop, and if you are having this problem in both modes.

answered Oct 16 at 14:29

harrymc

249k10257549

Thanks for reply. I installed drivers with CD which was into printer box. ok i will download and try as you advised and will inform results.
– VEGA
Oct 17 at 5:29

Thanks for help friend. it is solved. I did everything as you told me. Thanks.
– VEGA
Oct 19 at 5:14

add a comment |

up vote
0
down vote

accepted

You may try to download and install M2870FD software from
Software and driver results for: Samsung Xpress SL-M2870FD Laser Multifunction Printer.

The section to look at is "Driver-Product Installation Software", both the
"Print Driver" and "Scan Driver".

If you are using the Easy Print Manager, open it and click "Scan to Pc Setting",
and check it is set to Enable.

If this does not help, it would help to know if you are scanning from the printer
or from the desktop, and if you are having this problem in both modes.

answered Oct 16 at 14:29

harrymc

249k10257549

You may try to download and install M2870FD software from
Software and driver results for: Samsung Xpress SL-M2870FD Laser Multifunction Printer.

The section to look at is "Driver-Product Installation Software", both the
"Print Driver" and "Scan Driver".

If you are using the Easy Print Manager, open it and click "Scan to Pc Setting",
and check it is set to Enable.

If this does not help, it would help to know if you are scanning from the printer
or from the desktop, and if you are having this problem in both modes.

answered Oct 16 at 14:29

harrymc

249k10257549

answered Oct 16 at 14:29

harrymc

249k10257549

answered Oct 16 at 14:29

harrymc

249k10257549

answered Oct 16 at 14:29

harrymc

249k10257549

Thanks for reply. I installed drivers with CD which was into printer box. ok i will download and try as you advised and will inform results.
– VEGA
Oct 17 at 5:29

Thanks for help friend. it is solved. I did everything as you told me. Thanks.
– VEGA
Oct 19 at 5:14

add a comment |

Thanks for reply. I installed drivers with CD which was into printer box. ok i will download and try as you advised and will inform results.
– VEGA
Oct 17 at 5:29

Thanks for help friend. it is solved. I did everything as you told me. Thanks.
– VEGA
Oct 19 at 5:14

Thanks for reply. I installed drivers with CD which was into printer box. ok i will download and try as you advised and will inform results.
– VEGA
Oct 17 at 5:29

Thanks for help friend. it is solved. I did everything as you told me. Thanks.
– VEGA
Oct 19 at 5:14

add a comment |

up vote
0
down vote

This error message displays when the scan application is unable to recognize the changes in Windows 10 RS4.

You'll need to update your scanner software to fix this. The latest software and drivers are available on HP's support page for your MFP.

answered Nov 23 at 13:23

bwDraco

36.4k36135177

add a comment |

up vote
0
down vote

This error message displays when the scan application is unable to recognize the changes in Windows 10 RS4.

You'll need to update your scanner software to fix this. The latest software and drivers are available on HP's support page for your MFP.

answered Nov 23 at 13:23

bwDraco

36.4k36135177

add a comment |

up vote
0
down vote

This error message displays when the scan application is unable to recognize the changes in Windows 10 RS4.

You'll need to update your scanner software to fix this. The latest software and drivers are available on HP's support page for your MFP.

answered Nov 23 at 13:23

bwDraco

36.4k36135177

This error message displays when the scan application is unable to recognize the changes in Windows 10 RS4.

You'll need to update your scanner software to fix this. The latest software and drivers are available on HP's support page for your MFP.

answered Nov 23 at 13:23

bwDraco

36.4k36135177

answered Nov 23 at 13:23

bwDraco

36.4k36135177

answered Nov 23 at 13:23

bwDraco

36.4k36135177

answered Nov 23 at 13:23

bwDraco

36.4k36135177

add a comment |

draft saved

draft discarded

Thanks for contributing an answer to Super User!

Please be sure to answer the question. Provide details and share your research!

But avoid …

Asking for help, clarification, or responding to other answers.

Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

Some of your past answers have not been well-received, and you're in danger of being blocked from answering.

Please pay close attention to the following guidance:

Please be sure to answer the question. Provide details and share your research!

But avoid …

Asking for help, clarification, or responding to other answers.

Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Name

Required, but never shown

Name

Required, but never shown

This page is only for reference, If you need detailed information, please check here

搜尋此網誌

Argthtjtr