Why VMware Player does not recognize USB devices?
I am running Ubuntu 10.04 LTS as a guest OS via VMware Player 3.1.4 build-385536 over Windows 7 Home Premium host OS. This runs on a HP Pavilion g7-1173dx laptop.
At the Virtual Machine... menu > VM Settings... dialog I see a USB Controller present in the Device list. In the Connections frame, the USB 2.0 device support in enabled.
However, on the Virtual Machine... menu > Removable Devices submenu I see no USB device entry.
Attaching a Sandisk Cruzer 16GB flash drive to the USB port, I can see the drive in Windows, but I can't see the device in the VM list.
Trying to connect an Altera FPGA dev board system to the USB port was not successful either.
When restarting the VM, I get the following error tooltip:
Other than that port, I have a USB keyboard and a USB mouse connected to the other 2 USB ports, both working well.
How can I make VMware Player recognize my USB devices?
EDIT 1:
Thanks to @Moab, I found out that the relevant service was indeed inactive. Its Startup type is "Automatic". I tried to manually start it and received the following error:
I am not sure what this means. The drive (configured as a U3 drive, BTW) is recognized in Windows.
EDIT 2:
Found this post on the VMware Knowledgebase. It suggests that on AMD based systems (like my g7) there may be a conflict with some AMD USB Driver Filter, and provides with removal instructions and a warning that it may disable other USB devices.
How safe is it to follow the steps suggested in the post?
windows-7 usb ubuntu-10.04 vmware-player
edited Jan 1 at 11:39
Glorfindel
1,38441220
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
|
show 2 more comments
I am running Ubuntu 10.04 LTS as a guest OS via VMware Player 3.1.4 build-385536 over Windows 7 Home Premium host OS. This runs on a HP Pavilion g7-1173dx laptop.
At the Virtual Machine... menu > VM Settings... dialog I see a USB Controller present in the Device list. In the Connections frame, the USB 2.0 device support in enabled.
However, on the Virtual Machine... menu > Removable Devices submenu I see no USB device entry.
Attaching a Sandisk Cruzer 16GB flash drive to the USB port, I can see the drive in Windows, but I can't see the device in the VM list.
Trying to connect an Altera FPGA dev board system to the USB port was not successful either.
When restarting the VM, I get the following error tooltip:
Other than that port, I have a USB keyboard and a USB mouse connected to the other 2 USB ports, both working well.
How can I make VMware Player recognize my USB devices?
EDIT 1:
Thanks to @Moab, I found out that the relevant service was indeed inactive. Its Startup type is "Automatic". I tried to manually start it and received the following error:
I am not sure what this means. The drive (configured as a U3 drive, BTW) is recognized in Windows.
EDIT 2:
Found this post on the VMware Knowledgebase. It suggests that on AMD based systems (like my g7) there may be a conflict with some AMD USB Driver Filter, and provides with removal instructions and a warning that it may disable other USB devices.
How safe is it to follow the steps suggested in the post?
windows-7 usb ubuntu-10.04 vmware-player
edited Jan 1 at 11:39
Glorfindel
1,38441220
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
Maybe you need to run VMware Player AS Administrator?
– James T Snell
Oct 5 '11 at 0:22
Maybe try running this VM in the evaluation version of VMware Workstation.
– James T Snell
Oct 5 '11 at 0:37
1
Check Windows Services and be sure VMware USB Arbitration Service is running, as the error message suggests.
– Moab
Oct 5 '11 at 0:40
@Moab - many thanks. The service was on "Automatic", but not started. When trying to start it manually, I get an error message. I will update the question.
– ysap
Oct 5 '11 at 0:50
I never consider anything safe, this is why I have backups of my system and critical personal data.. Make a full disk image pr two for disaster recovery purposes and then make a manual Windows restore point before you make any changes.
– Moab
Oct 5 '11 at 1:55
|
show 2 more comments
I am running Ubuntu 10.04 LTS as a guest OS via VMware Player 3.1.4 build-385536 over Windows 7 Home Premium host OS. This runs on a HP Pavilion g7-1173dx laptop.
At the Virtual Machine... menu > VM Settings... dialog I see a USB Controller present in the Device list. In the Connections frame, the USB 2.0 device support in enabled.
However, on the Virtual Machine... menu > Removable Devices submenu I see no USB device entry.
Attaching a Sandisk Cruzer 16GB flash drive to the USB port, I can see the drive in Windows, but I can't see the device in the VM list.
Trying to connect an Altera FPGA dev board system to the USB port was not successful either.
When restarting the VM, I get the following error tooltip:
Other than that port, I have a USB keyboard and a USB mouse connected to the other 2 USB ports, both working well.
How can I make VMware Player recognize my USB devices?
EDIT 1:
Thanks to @Moab, I found out that the relevant service was indeed inactive. Its Startup type is "Automatic". I tried to manually start it and received the following error:
I am not sure what this means. The drive (configured as a U3 drive, BTW) is recognized in Windows.
EDIT 2:
Found this post on the VMware Knowledgebase. It suggests that on AMD based systems (like my g7) there may be a conflict with some AMD USB Driver Filter, and provides with removal instructions and a warning that it may disable other USB devices.
How safe is it to follow the steps suggested in the post?
windows-7 usb ubuntu-10.04 vmware-player
edited Jan 1 at 11:39
Glorfindel
1,38441220
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
I am running Ubuntu 10.04 LTS as a guest OS via VMware Player 3.1.4 build-385536 over Windows 7 Home Premium host OS. This runs on a HP Pavilion g7-1173dx laptop.
At the Virtual Machine... menu > VM Settings... dialog I see a USB Controller present in the Device list. In the Connections frame, the USB 2.0 device support in enabled.
However, on the Virtual Machine... menu > Removable Devices submenu I see no USB device entry.
Attaching a Sandisk Cruzer 16GB flash drive to the USB port, I can see the drive in Windows, but I can't see the device in the VM list.
Trying to connect an Altera FPGA dev board system to the USB port was not successful either.
When restarting the VM, I get the following error tooltip:
Other than that port, I have a USB keyboard and a USB mouse connected to the other 2 USB ports, both working well.
How can I make VMware Player recognize my USB devices?
EDIT 1:
Thanks to @Moab, I found out that the relevant service was indeed inactive. Its Startup type is "Automatic". I tried to manually start it and received the following error:
I am not sure what this means. The drive (configured as a U3 drive, BTW) is recognized in Windows.
EDIT 2:
Found this post on the VMware Knowledgebase. It suggests that on AMD based systems (like my g7) there may be a conflict with some AMD USB Driver Filter, and provides with removal instructions and a warning that it may disable other USB devices.
How safe is it to follow the steps suggested in the post?
windows-7 usb ubuntu-10.04 vmware-player
windows-7 usb ubuntu-10.04 vmware-player
edited Jan 1 at 11:39
Glorfindel
1,38441220
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
edited Jan 1 at 11:39
Glorfindel
1,38441220
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
edited Jan 1 at 11:39
Glorfindel
1,38441220
edited Jan 1 at 11:39
Glorfindel
1,38441220
edited Jan 1 at 11:39
Glorfindel
1,38441220
1,38441220
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
asked Oct 5 '11 at 0:15
ysapysap
1,186123058
1,186123058
Maybe you need to run VMware Player AS Administrator?
– James T Snell
Oct 5 '11 at 0:22
Maybe try running this VM in the evaluation version of VMware Workstation.
– James T Snell
Oct 5 '11 at 0:37
1
Check Windows Services and be sure VMware USB Arbitration Service is running, as the error message suggests.
– Moab
Oct 5 '11 at 0:40
@Moab - many thanks. The service was on "Automatic", but not started. When trying to start it manually, I get an error message. I will update the question.
– ysap
Oct 5 '11 at 0:50
I never consider anything safe, this is why I have backups of my system and critical personal data.. Make a full disk image pr two for disaster recovery purposes and then make a manual Windows restore point before you make any changes.
– Moab
Oct 5 '11 at 1:55
|
show 2 more comments
Maybe you need to run VMware Player AS Administrator?
– James T Snell
Oct 5 '11 at 0:22
Maybe try running this VM in the evaluation version of VMware Workstation.
– James T Snell
Oct 5 '11 at 0:37
1
Check Windows Services and be sure VMware USB Arbitration Service is running, as the error message suggests.
– Moab
Oct 5 '11 at 0:40
@Moab - many thanks. The service was on "Automatic", but not started. When trying to start it manually, I get an error message. I will update the question.
– ysap
Oct 5 '11 at 0:50
I never consider anything safe, this is why I have backups of my system and critical personal data.. Make a full disk image pr two for disaster recovery purposes and then make a manual Windows restore point before you make any changes.
– Moab
Oct 5 '11 at 1:55
Maybe you need to run VMware Player AS Administrator?
– James T Snell
Oct 5 '11 at 0:22
Maybe you need to run VMware Player AS Administrator?
– James T Snell
Oct 5 '11 at 0:22
Maybe try running this VM in the evaluation version of VMware Workstation.
– James T Snell
Oct 5 '11 at 0:37
Maybe try running this VM in the evaluation version of VMware Workstation.
– James T Snell
Oct 5 '11 at 0:37
1
1
Check Windows Services and be sure VMware USB Arbitration Service is running, as the error message suggests.
– Moab
Oct 5 '11 at 0:40
Check Windows Services and be sure VMware USB Arbitration Service is running, as the error message suggests.
– Moab
Oct 5 '11 at 0:40
@Moab - many thanks. The service was on "Automatic", but not started. When trying to start it manually, I get an error message. I will update the question.
– ysap
Oct 5 '11 at 0:50
@Moab - many thanks. The service was on "Automatic", but not started. When trying to start it manually, I get an error message. I will update the question.
– ysap
Oct 5 '11 at 0:50
I never consider anything safe, this is why I have backups of my system and critical personal data.. Make a full disk image pr two for disaster recovery purposes and then make a manual Windows restore point before you make any changes.
– Moab
Oct 5 '11 at 1:55
I never consider anything safe, this is why I have backups of my system and critical personal data.. Make a full disk image pr two for disaster recovery purposes and then make a manual Windows restore point before you make any changes.
– Moab
Oct 5 '11 at 1:55
|
show 2 more comments
1 Answer
1
active
oldest
votes
OK, the problem seems to be a collision of the VMware USB Arbiter service with the AMD USB Filter Driver. I used the method described in section 5 to remove the filter driver using the AMD Catalyst uninstall wizard.
After removing the filter and restarting everything, a USB drive is now recognized and mounted by VM. I was able to play a MP3 file from the drive.
Note that as of now, I have not yet tested for any side-effects of the USB operation on the Win 7 system. Per the reference, there might be problems using USB devices after removing the filter.
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f343049%2fwhy-vmware-player-does-not-recognize-usb-devices%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
OK, the problem seems to be a collision of the VMware USB Arbiter service with the AMD USB Filter Driver. I used the method described in section 5 to remove the filter driver using the AMD Catalyst uninstall wizard.
After removing the filter and restarting everything, a USB drive is now recognized and mounted by VM. I was able to play a MP3 file from the drive.
Note that as of now, I have not yet tested for any side-effects of the USB operation on the Win 7 system. Per the reference, there might be problems using USB devices after removing the filter.
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
add a comment |
OK, the problem seems to be a collision of the VMware USB Arbiter service with the AMD USB Filter Driver. I used the method described in section 5 to remove the filter driver using the AMD Catalyst uninstall wizard.
After removing the filter and restarting everything, a USB drive is now recognized and mounted by VM. I was able to play a MP3 file from the drive.
Note that as of now, I have not yet tested for any side-effects of the USB operation on the Win 7 system. Per the reference, there might be problems using USB devices after removing the filter.
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
add a comment |
OK, the problem seems to be a collision of the VMware USB Arbiter service with the AMD USB Filter Driver. I used the method described in section 5 to remove the filter driver using the AMD Catalyst uninstall wizard.
After removing the filter and restarting everything, a USB drive is now recognized and mounted by VM. I was able to play a MP3 file from the drive.
Note that as of now, I have not yet tested for any side-effects of the USB operation on the Win 7 system. Per the reference, there might be problems using USB devices after removing the filter.
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
OK, the problem seems to be a collision of the VMware USB Arbiter service with the AMD USB Filter Driver. I used the method described in section 5 to remove the filter driver using the AMD Catalyst uninstall wizard.
After removing the filter and restarting everything, a USB drive is now recognized and mounted by VM. I was able to play a MP3 file from the drive.
Note that as of now, I have not yet tested for any side-effects of the USB operation on the Win 7 system. Per the reference, there might be problems using USB devices after removing the filter.
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
answered Oct 5 '11 at 14:48
ysapysap
1,186123058
1,186123058
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f343049%2fwhy-vmware-player-does-not-recognize-usb-devices%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Maybe you need to run VMware Player AS Administrator?
– James T Snell
Oct 5 '11 at 0:22
Maybe try running this VM in the evaluation version of VMware Workstation.
– James T Snell
Oct 5 '11 at 0:37
1
Check Windows Services and be sure VMware USB Arbitration Service is running, as the error message suggests.
– Moab
Oct 5 '11 at 0:40
@Moab - many thanks. The service was on "Automatic", but not started. When trying to start it manually, I get an error message. I will update the question.
– ysap
Oct 5 '11 at 0:50
I never consider anything safe, this is why I have backups of my system and critical personal data.. Make a full disk image pr two for disaster recovery purposes and then make a manual Windows restore point before you make any changes.
– Moab
Oct 5 '11 at 1:55